NTISthis.com

Evidence Guide: AURMTA001 - Prepare and service light competition vehicles

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURMTA001 - Prepare and service light competition vehicles

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare for work

  1. Job requirements are determined from team instructions, category rules and supplementary regulations
  2. Servicing procedures and information are sourced
  3. Hazards associated with the work are identified and risks are managed
  4. Tools, equipment and materials are selected and checked for serviceability
  5. Work area is cleaned and laid out for job requirements
  6. Problems with work area or operation of equipment are reported to appropriate personnel as required
Job requirements are determined from team instructions, category rules and supplementary regulations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Servicing procedures and information are sourced

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment and materials are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned and laid out for job requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Problems with work area or operation of equipment are reported to appropriate personnel as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare competition vehicle

  1. Vehicle is positioned and secured ready for servicing according to manufacturer specifications and workplace procedures
  2. Temporary bungs and covers are removed and engine pre-start checks are conducted according to team procedures and safety and environmental requirements
  3. Pre-service inspection and preparation are carried out according to manufacturer specifications, workplace procedures and safety requirements
  4. Inspection findings are reported according to workplace procedures, and recommendations for service, repairs or adjustments are reported
Vehicle is positioned and secured ready for servicing according to manufacturer specifications and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Temporary bungs and covers are removed and engine pre-start checks are conducted according to team procedures and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Pre-service inspection and preparation are carried out according to manufacturer specifications, workplace procedures and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspection findings are reported according to workplace procedures, and recommendations for service, repairs or adjustments are reported

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Service competition vehicle

  1. Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
  2. Vehicle is started and systems, pressures and temperatures are checked for abnormal noise and leaks, according to team procedures and safety and environmental requirements
  3. Vehicle sub-assembly and systems operation are checked according to team procedures and safety and environmental requirements
  4. Vehicle components are shielded as required and according to team procedures
  5. Potential or existing problems are documented and reported to appropriate personnel as required and according to team procedures
Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Vehicle is started and systems, pressures and temperatures are checked for abnormal noise and leaks, according to team procedures and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Vehicle sub-assembly and systems operation are checked according to team procedures and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Vehicle components are shielded as required and according to team procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Potential or existing problems are documented and reported to appropriate personnel as required and according to team procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work is to workplace expectations and vehicle is cleaned and presented ready for use
  2. Work area is cleaned, waste and non-recyclable material is disposed of and recyclable material is collected
  3. Tools and equipment are checked and stored, and surplus components and consumables are packed and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work is to workplace expectations and vehicle is cleaned and presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable material is disposed of and recyclable material is collected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored, and surplus components and consumables are packed and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare for work

  1. Job requirements are determined from team instructions, category rules and supplementary regulations
  2. Servicing procedures and information are sourced
  3. Hazards associated with the work are identified and risks are managed
  4. Tools, equipment and materials are selected and checked for serviceability
  5. Work area is cleaned and laid out for job requirements
  6. Problems with work area or operation of equipment are reported to appropriate personnel as required
Job requirements are determined from team instructions, category rules and supplementary regulations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Servicing procedures and information are sourced

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment and materials are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned and laid out for job requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Problems with work area or operation of equipment are reported to appropriate personnel as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare competition vehicle

  1. Vehicle is positioned and secured ready for servicing according to manufacturer specifications and workplace procedures
  2. Temporary bungs and covers are removed and engine pre-start checks are conducted according to team procedures and safety and environmental requirements
  3. Pre-service inspection and preparation are carried out according to manufacturer specifications, workplace procedures and safety requirements
  4. Inspection findings are reported according to workplace procedures, and recommendations for service, repairs or adjustments are reported
Vehicle is positioned and secured ready for servicing according to manufacturer specifications and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Temporary bungs and covers are removed and engine pre-start checks are conducted according to team procedures and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Pre-service inspection and preparation are carried out according to manufacturer specifications, workplace procedures and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspection findings are reported according to workplace procedures, and recommendations for service, repairs or adjustments are reported

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Service competition vehicle

  1. Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
  2. Vehicle is started and systems, pressures and temperatures are checked for abnormal noise and leaks, according to team procedures and safety and environmental requirements
  3. Vehicle sub-assembly and systems operation are checked according to team procedures and safety and environmental requirements
  4. Vehicle components are shielded as required and according to team procedures
  5. Potential or existing problems are documented and reported to appropriate personnel as required and according to team procedures
Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Vehicle is started and systems, pressures and temperatures are checked for abnormal noise and leaks, according to team procedures and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Vehicle sub-assembly and systems operation are checked according to team procedures and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Vehicle components are shielded as required and according to team procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Potential or existing problems are documented and reported to appropriate personnel as required and according to team procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work is to workplace expectations and vehicle is cleaned and presented ready for use
  2. Work area is cleaned, waste and non-recyclable material is disposed of and recyclable material is collected
  3. Tools and equipment are checked and stored, and surplus components and consumables are packed and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work is to workplace expectations and vehicle is cleaned and presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable material is disposed of and recyclable material is collected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored, and surplus components and consumables are packed and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare for work

1.1 Job requirements are determined from team instructions, category rules and supplementary regulations

1.2 Servicing procedures and information are sourced

1.3 Hazards associated with the work are identified and risks are managed

1.4 Tools, equipment and materials are selected and checked for serviceability

1.5 Work area is cleaned and laid out for job requirements

1.6 Problems with work area or operation of equipment are reported to appropriate personnel as required

2. Prepare competition vehicle

2.1 Vehicle is positioned and secured ready for servicing according to manufacturer specifications and workplace procedures

2.2 Temporary bungs and covers are removed and engine pre-start checks are conducted according to team procedures and safety and environmental requirements

2.3 Pre-service inspection and preparation are carried out according to manufacturer specifications, workplace procedures and safety requirements

2.4 Inspection findings are reported according to workplace procedures, and recommendations for service, repairs or adjustments are reported

3. Service competition vehicle

3.1 Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems

3.2 Vehicle is started and systems, pressures and temperatures are checked for abnormal noise and leaks, according to team procedures and safety and environmental requirements

3.3 Vehicle sub-assembly and systems operation are checked according to team procedures and safety and environmental requirements

3.4 Vehicle components are shielded as required and according to team procedures

3.5 Potential or existing problems are documented and reported to appropriate personnel as required and according to team procedures

4. Complete work processes

4.1 Final inspection is made to ensure work is to workplace expectations and vehicle is cleaned and presented ready for use

4.2 Work area is cleaned, waste and non-recyclable material is disposed of and recyclable material is collected

4.3 Tools and equipment are checked and stored, and surplus components and consumables are packed and stored according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

Required Skills and Knowledge

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare for work

1.1 Job requirements are determined from team instructions, category rules and supplementary regulations

1.2 Servicing procedures and information are sourced

1.3 Hazards associated with the work are identified and risks are managed

1.4 Tools, equipment and materials are selected and checked for serviceability

1.5 Work area is cleaned and laid out for job requirements

1.6 Problems with work area or operation of equipment are reported to appropriate personnel as required

2. Prepare competition vehicle

2.1 Vehicle is positioned and secured ready for servicing according to manufacturer specifications and workplace procedures

2.2 Temporary bungs and covers are removed and engine pre-start checks are conducted according to team procedures and safety and environmental requirements

2.3 Pre-service inspection and preparation are carried out according to manufacturer specifications, workplace procedures and safety requirements

2.4 Inspection findings are reported according to workplace procedures, and recommendations for service, repairs or adjustments are reported

3. Service competition vehicle

3.1 Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems

3.2 Vehicle is started and systems, pressures and temperatures are checked for abnormal noise and leaks, according to team procedures and safety and environmental requirements

3.3 Vehicle sub-assembly and systems operation are checked according to team procedures and safety and environmental requirements

3.4 Vehicle components are shielded as required and according to team procedures

3.5 Potential or existing problems are documented and reported to appropriate personnel as required and according to team procedures

4. Complete work processes

4.1 Final inspection is made to ensure work is to workplace expectations and vehicle is cleaned and presented ready for use

4.2 Work area is cleaned, waste and non-recyclable material is disposed of and recyclable material is collected

4.3 Tools and equipment are checked and stored, and surplus components and consumables are packed and stored according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

prepare and service two different light competition vehicles, each under 300 kg of unladen weight.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to preparing and servicing light competition vehicles, including procedures for:

selecting and using personal protective equipment (PPE)

identifying acceptable tolerance levels for noise, heat and fumes

environmental requirements, including procedures for trapping, storing and disposing of fluids released during vehicle preparation

team instructions, category rules and supplementary regulations relating to motor sport events

competition vehicle servicing and preparation procedures, including:

work area and component layout procedures

cleaning methods and precautions

types of securing devices and securing methods

types of shielding devices and shielding methods

record keeping procedures

procedures for reporting equipment faults and component defects

engine pre-start checks

procedures for checking vehicle system pressures and temperatures

common types of abnormal noises and leaks

procedures for checking and storing tools and equipment

procedures for cleaning vehicles.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Service must include:

pre- and post-service adjustments, including procedures for checking:

electronic control units

data acquisition system components

communication equipment

circuit breakers, and relay and isolation switches

fuel tank and cell

pumps and reservoirs

fire bottles and controller.

Safety and environmental requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

selecting and using personal protective equipment (PPE)

identifying acceptable tolerance levels for noise, heat and fumes

environmental requirements, including procedures for trapping, storing and disposing of fluids released during vehicle preparation.