NTISthis.com

Evidence Guide: AURMTA009 - Collect and log motor sport data

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURMTA009 - Collect and log motor sport data

What evidence can you provide to prove your understanding of each of the following citeria?

Identify motor sport data collection requirement

  1. Job requirements are determined from workplace instructions
  2. Data specific requirements are determined from team instructions and procedures and controlling body rules, category rules and supplementary regulations
  3. Purpose and end users of data are identified
  4. Sources of data are identified
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Data specific requirements are determined from team instructions and procedures and controlling body rules, category rules and supplementary regulations

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Purpose and end users of data are identified

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Sources of data are identified

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Prepare resources for data collection

  1. Checklists and recording sheets are developed according to team procedures
  2. Manual instruments are prepared for data collection
  3. Electronic data acquisition system settings are checked
  4. Equipment settings, calibration and system are checked and adjusted according to task requirements and equipment manufacturer instructions
  5. Trial runs are conducted to check equipment and procedures and required adjustments are made
Checklists and recording sheets are developed according to team procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Manual instruments are prepared for data collection

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Electronic data acquisition system settings are checked

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Equipment settings, calibration and system are checked and adjusted according to task requirements and equipment manufacturer instructions

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Trial runs are conducted to check equipment and procedures and required adjustments are made

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Collect data

  1. Data acquisition system start-up procedure is carried out according to manufacturer procedures
  2. Data acquisition system is operated according to its designed capacity and purpose and to manufacturer specifications and safety requirements
  3. Potential for inaccurate results arising from variables is determined
  4. Data is checked for accuracy according to manufacturer specifications
  5. Problems with required data or operation of equipment are reported to appropriate persons as required
Data acquisition system start-up procedure is carried out according to manufacturer procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Data acquisition system is operated according to its designed capacity and purpose and to manufacturer specifications and safety requirements

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Potential for inaccurate results arising from variables is determined

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Data is checked for accuracy according to manufacturer specifications

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Problems with required data or operation of equipment are reported to appropriate persons as required

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Log data

  1. Selected data is imported into data analysis software according to manufacturer procedures
  2. Data is evaluated for preliminary indication of non-conformity and trends or patterns
  3. Findings from data are collated and reported to appropriate persons according to team procedures
  4. Data is stored for later retrieval according to team procedures
Selected data is imported into data analysis software according to manufacturer procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Data is evaluated for preliminary indication of non-conformity and trends or patterns

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Findings from data are collated and reported to appropriate persons according to team procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Data is stored for later retrieval according to team procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work is to workplace expectations and data is presented ready for use
  2. Data recording equipment is checked and stored according to workplace procedures
  3. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work is to workplace expectations and data is presented ready for use

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Data recording equipment is checked and stored according to workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Identify motor sport data collection requirement

  1. Job requirements are determined from workplace instructions
  2. Data specific requirements are determined from team instructions and procedures and controlling body rules, category rules and supplementary regulations
  3. Purpose and end users of data are identified
  4. Sources of data are identified
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Data specific requirements are determined from team instructions and procedures and controlling body rules, category rules and supplementary regulations

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Purpose and end users of data are identified

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Sources of data are identified

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Prepare resources for data collection

  1. Checklists and recording sheets are developed according to team procedures
  2. Manual instruments are prepared for data collection
  3. Electronic data acquisition system settings are checked
  4. Equipment settings, calibration and system are checked and adjusted according to task requirements and equipment manufacturer instructions
  5. Trial runs are conducted to check equipment and procedures and required adjustments are made
Checklists and recording sheets are developed according to team procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Manual instruments are prepared for data collection

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Electronic data acquisition system settings are checked

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Equipment settings, calibration and system are checked and adjusted according to task requirements and equipment manufacturer instructions

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Trial runs are conducted to check equipment and procedures and required adjustments are made

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Collect data

  1. Data acquisition system start-up procedure is carried out according to manufacturer procedures
  2. Data acquisition system is operated according to its designed capacity and purpose and to manufacturer specifications and safety requirements
  3. Potential for inaccurate results arising from variables is determined
  4. Data is checked for accuracy according to manufacturer specifications
  5. Problems with required data or operation of equipment are reported to appropriate persons as required
  6. Selected data is imported into data analysis software according to manufacturer procedures
  7. Data is evaluated for preliminary indication of non-conformity and trends or patterns
  8. Findings from data are collated and reported to appropriate persons according to team procedures
  9. Data is stored for later retrieval according to team procedures
Data acquisition system start-up procedure is carried out according to manufacturer procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Data acquisition system is operated according to its designed capacity and purpose and to manufacturer specifications and safety requirements

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Potential for inaccurate results arising from variables is determined

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Data is checked for accuracy according to manufacturer specifications

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Problems with required data or operation of equipment are reported to appropriate persons as required

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Selected data is imported into data analysis software according to manufacturer procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Data is evaluated for preliminary indication of non-conformity and trends or patterns

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Findings from data are collated and reported to appropriate persons according to team procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Data is stored for later retrieval according to team procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work is to workplace expectations and data is presented ready for use
  2. Data recording equipment is checked and stored according to workplace procedures
  3. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work is to workplace expectations and data is presented ready for use

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Data recording equipment is checked and stored according to workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Identify motor sport data collection requirement

1.1 Job requirements are determined from workplace instructions

1.2 Data specific requirements are determined from team instructions and procedures and controlling body rules, category rules and supplementary regulations

1.3 Purpose and end users of data are identified

1.4 Sources of data are identified

2. Prepare resources for data collection

2.1 Checklists and recording sheets are developed according to team procedures

2.2 Manual instruments are prepared for data collection

2.3 Electronic data acquisition system settings are checked

2.4 Equipment settings, calibration and system are checked and adjusted according to task requirements and equipment manufacturer instructions

2.5 Trial runs are conducted to check equipment and procedures and required adjustments are made

3. Collect data

3.1 Data acquisition system start-up procedure is carried out according to manufacturer procedures

3.2 Data acquisition system is operated according to its designed capacity and purpose and to manufacturer specifications and safety requirements

3.3 Potential for inaccurate results arising from variables is determined

3.4 Data is checked for accuracy according to manufacturer specifications

3.5 Problems with required data or operation of equipment are reported to appropriate persons as required

4. Log data

4.1 Selected data is imported into data analysis software according to manufacturer procedures

4.2 Data is evaluated for preliminary indication of non-conformity and trends or patterns

4.3 Findings from data are collated and reported to appropriate persons according to team procedures

4.4 Data is stored for later retrieval according to team procedures

5. Complete work processes

5.1 Final inspection is made to ensure work is to workplace expectations and data is presented ready for use

5.2 Data recording equipment is checked and stored according to workplace procedures

5.3 Workplace documentation is processed according to workplace procedures

Required Skills and Knowledge

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Identify motor sport data collection requirement

1.1 Job requirements are determined from workplace instructions

1.2 Data specific requirements are determined from team instructions and procedures and controlling body rules, category rules and supplementary regulations

1.3 Purpose and end users of data are identified

1.4 Sources of data are identified

2. Prepare resources for data collection

2.1 Checklists and recording sheets are developed according to team procedures

2.2 Manual instruments are prepared for data collection

2.3 Electronic data acquisition system settings are checked

2.4 Equipment settings, calibration and system are checked and adjusted according to task requirements and equipment manufacturer instructions

2.5 Trial runs are conducted to check equipment and procedures and required adjustments are made

3. Collect data

3.1 Data acquisition system start-up procedure is carried out according to manufacturer procedures

3.2 Data acquisition system is operated according to its designed capacity and purpose and to manufacturer specifications and safety requirements

3.3 Potential for inaccurate results arising from variables is determined

3.4 Data is checked for accuracy according to manufacturer specifications

3.5 Problems with required data or operation of equipment are reported to appropriate persons as required

4. Log data

4.1 Selected data is imported into data analysis software according to manufacturer procedures

4.2 Data is evaluated for preliminary indication of non-conformity and trends or patterns

4.3 Findings from data are collated and reported to appropriate persons according to team procedures

4.4 Data is stored for later retrieval according to team procedures

5. Complete work processes

5.1 Final inspection is made to ensure work is to workplace expectations and data is presented ready for use

5.2 Data recording equipment is checked and stored according to workplace procedures

5.3 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

collect and log data at two different motor sport events, including at one sanctioned motor sport event

use both manual and electronic systems at each of the above events

collect the following types of data at each of the above events:

vehicle data

weather data

circuit data

driver or rider characteristics.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to collecting and logging motor sport data, including procedures for:

identifying hazards and managing risks

identifying acceptable tolerance levels for noise, heat and fumes

motor sport data acquisition systems, including:

types, characteristics, components, uses and limitations

types of motor sport data, including data irregularities and tolerance levels

end users of motor sport data

manual data collection and logging methods

electronic data collection and logging methods

types of data analysis software, including:

methods of importing data and performing preliminary data evaluation

methods of collating, reporting and recording data findings

data acquisition system inspection, maintenance and system check procedures.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Checking must include:

function

accuracy

efficiency.

Safety requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

identifying hazards and managing risks

identifying acceptable tolerance levels for noise, heat and fumes.