NTISthis.com

Evidence Guide: AURMTE001 - Test engines using a dynamometer

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURMTE001 - Test engines using a dynamometer

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare for dynamometer operation

  1. Job requirements are determined from test information
  2. Dynamometer is checked for calibration and serviceability according to manufacturer and workplace procedures
  3. Tools, equipment and materials are selected and checked for serviceability
  4. Hazards associated with the work are identified and risks are managed according to safety and environmental requirements
  5. Engine or vehicle is checked prior to testing according to manufacturer and workplace procedures
  6. Engine or vehicle connections to dynamometer are checked and secured according to manufacturer, workplace and safety procedures
Job requirements are determined from test information

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Dynamometer is checked for calibration and serviceability according to manufacturer and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment and materials are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed according to safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Engine or vehicle is checked prior to testing according to manufacturer and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Engine or vehicle connections to dynamometer are checked and secured according to manufacturer, workplace and safety procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Conduct dynamometer testing

  1. Appropriate load and run sequence and test parameters are determined, including run-in period for new engines
  2. Selected dynamometer testing sequence is carried out according to manufacturer and team procedures and safety requirements, and data is documented
  3. Correction factors are calculated and applied to data
Appropriate load and run sequence and test parameters are determined, including run-in period for new engines

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Selected dynamometer testing sequence is carried out according to manufacturer and team procedures and safety requirements, and data is documented

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Correction factors are calculated and applied to data

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Analyse test results

  1. Dynamometer test data is analysed and conclusions are drawn about condition and performance of engine and associated systems according to manufacturer specifications and workplace procedures
  2. Findings are reported based on dynamometer data, including recommendations for engine configuration and/or modifications to improve performance, according to workplace procedures
  3. Recommended engine modifications are tested on dynamometer according to manufacturer and workplace procedures and safety requirements, and data is documented
  4. Data is presented to team members according to workplace procedures
Dynamometer test data is analysed and conclusions are drawn about condition and performance of engine and associated systems according to manufacturer specifications and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Findings are reported based on dynamometer data, including recommendations for engine configuration and/or modifications to improve performance, according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Recommended engine modifications are tested on dynamometer according to manufacturer and workplace procedures and safety requirements, and data is documented

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Data is presented to team members according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Dynamometer shutdown procedure is carried out according to manufacturer and workplace procedures and safety requirements
  2. Engine is disconnected from dynamometer according to manufacturer and workplace procedures
  3. Dynamometer and associated equipment are checked and maintained according to workplace procedures
  4. Tools and equipment are checked and stored according to workplace procedures
  5. Workplace documentation, including dynamometer test results, are processed according to workplace procedures
Dynamometer shutdown procedure is carried out according to manufacturer and workplace procedures and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Engine is disconnected from dynamometer according to manufacturer and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Dynamometer and associated equipment are checked and maintained according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation, including dynamometer test results, are processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare for dynamometer operation

  1. Job requirements are determined from test information
  2. Dynamometer is checked for calibration and serviceability according to manufacturer and workplace procedures
  3. Tools, equipment and materials are selected and checked for serviceability
  4. Hazards associated with the work are identified and risks are managed according to safety and environmental requirements
  5. Engine or vehicle is checked prior to testing according to manufacturer and workplace procedures
  6. Engine or vehicle connections to dynamometer are checked and secured according to manufacturer, workplace and safety procedures
Job requirements are determined from test information

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Dynamometer is checked for calibration and serviceability according to manufacturer and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment and materials are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed according to safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Engine or vehicle is checked prior to testing according to manufacturer and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Engine or vehicle connections to dynamometer are checked and secured according to manufacturer, workplace and safety procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Conduct dynamometer testing

  1. Appropriate load and run sequence and test parameters are determined, including run-in period for new engines
  2. Selected dynamometer testing sequence is carried out according to manufacturer and team procedures and safety requirements, and data is documented
  3. Correction factors are calculated and applied to data
Appropriate load and run sequence and test parameters are determined, including run-in period for new engines

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Selected dynamometer testing sequence is carried out according to manufacturer and team procedures and safety requirements, and data is documented

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Correction factors are calculated and applied to data

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Analyse test results

  1. Dynamometer test data is analysed and conclusions are drawn about condition and performance of engine and associated systems according to manufacturer specifications and workplace procedures
  2. Findings are reported based on dynamometer data, including recommendations for engine configuration and/or modifications to improve performance, according to workplace procedures
  3. Recommended engine modifications are tested on dynamometer according to manufacturer and workplace procedures and safety requirements, and data is documented
  4. Data is presented to team members according to workplace procedures
Dynamometer test data is analysed and conclusions are drawn about condition and performance of engine and associated systems according to manufacturer specifications and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Findings are reported based on dynamometer data, including recommendations for engine configuration and/or modifications to improve performance, according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Recommended engine modifications are tested on dynamometer according to manufacturer and workplace procedures and safety requirements, and data is documented

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Data is presented to team members according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Dynamometer shutdown procedure is carried out according to manufacturer and workplace procedures and safety requirements
  2. Engine is disconnected from dynamometer according to manufacturer and workplace procedures
  3. Dynamometer and associated equipment are checked and maintained according to workplace procedures
  4. Tools and equipment are checked and stored according to workplace procedures
  5. Workplace documentation, including dynamometer test results, are processed according to workplace procedures
Dynamometer shutdown procedure is carried out according to manufacturer and workplace procedures and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Engine is disconnected from dynamometer according to manufacturer and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Dynamometer and associated equipment are checked and maintained according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation, including dynamometer test results, are processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare for dynamometer operation

1.1 Job requirements are determined from test information

1.2 Dynamometer is checked for calibration and serviceability according to manufacturer and workplace procedures

1.3 Tools, equipment and materials are selected and checked for serviceability

1.4 Hazards associated with the work are identified and risks are managed according to safety and environmental requirements

1.5 Engine or vehicle is checked prior to testing according to manufacturer and workplace procedures

1.6 Engine or vehicle connections to dynamometer are checked and secured according to manufacturer, workplace and safety procedures

2. Conduct dynamometer testing

2.1 Appropriate load and run sequence and test parameters are determined, including run-in period for new engines

2.2 Selected dynamometer testing sequence is carried out according to manufacturer and team procedures and safety requirements, and data is documented

2.3 Correction factors are calculated and applied to data

3. Analyse test results

3.1 Dynamometer test data is analysed and conclusions are drawn about condition and performance of engine and associated systems according to manufacturer specifications and workplace procedures

3.2 Findings are reported based on dynamometer data, including recommendations for engine configuration and/or modifications to improve performance, according to workplace procedures

3.3 Recommended engine modifications are tested on dynamometer according to manufacturer and workplace procedures and safety requirements, and data is documented

3.4 Data is presented to team members according to workplace procedures

4. Complete work processes

4.1 Dynamometer shutdown procedure is carried out according to manufacturer and workplace procedures and safety requirements

4.2 Engine is disconnected from dynamometer according to manufacturer and workplace procedures

4.3 Dynamometer and associated equipment are checked and maintained according to workplace procedures

4.4 Tools and equipment are checked and stored according to workplace procedures

4.5 Workplace documentation, including dynamometer test results, are processed according to workplace procedures

Required Skills and Knowledge

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare for dynamometer operation

1.1 Job requirements are determined from test information

1.2 Dynamometer is checked for calibration and serviceability according to manufacturer and workplace procedures

1.3 Tools, equipment and materials are selected and checked for serviceability

1.4 Hazards associated with the work are identified and risks are managed according to safety and environmental requirements

1.5 Engine or vehicle is checked prior to testing according to manufacturer and workplace procedures

1.6 Engine or vehicle connections to dynamometer are checked and secured according to manufacturer, workplace and safety procedures

2. Conduct dynamometer testing

2.1 Appropriate load and run sequence and test parameters are determined, including run-in period for new engines

2.2 Selected dynamometer testing sequence is carried out according to manufacturer and team procedures and safety requirements, and data is documented

2.3 Correction factors are calculated and applied to data

3. Analyse test results

3.1 Dynamometer test data is analysed and conclusions are drawn about condition and performance of engine and associated systems according to manufacturer specifications and workplace procedures

3.2 Findings are reported based on dynamometer data, including recommendations for engine configuration and/or modifications to improve performance, according to workplace procedures

3.3 Recommended engine modifications are tested on dynamometer according to manufacturer and workplace procedures and safety requirements, and data is documented

3.4 Data is presented to team members according to workplace procedures

4. Complete work processes

4.1 Dynamometer shutdown procedure is carried out according to manufacturer and workplace procedures and safety requirements

4.2 Engine is disconnected from dynamometer according to manufacturer and workplace procedures

4.3 Dynamometer and associated equipment are checked and maintained according to workplace procedures

4.4 Tools and equipment are checked and stored according to workplace procedures

4.5 Workplace documentation, including dynamometer test results, are processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

carry out dynamometer testing on two different engines.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to testing engines using a dynamometer, including procedures for:

connecting and securing engines to dynamometers

dealing with exhaust gases from engines

dealing with high levels of noise

environmental requirements, including procedures for trapping, storing and disposing of fluids released during engine testing

application, purpose and operation of engine dynamometers, including associated hardware and software

engine and chassis dynamometer testing procedures, including:

dynamometer preparation procedures

engine connection and securing procedures

vehicle connection and securing procedures

test environment correction factors

dynamometer data interpretation and analysis

operator dynamometer maintenance procedures

engine performance and dynamometer terminology.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Test information must include:

workplace instructions

category regulations and component supplier specifications, including allowable quality, materials, equipment and specifications.

Safety and environmental requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

connecting and securing engines to dynamometers

dealing with exhaust gases from engines

dealing with high levels of noise

environmental requirements, including procedures for trapping, storing and disposing of fluids released during engine testing.

Checking of engine or vehicle must include:

engine oil level and condition

cooling system condition and coolant level

exhaust extraction system connection

drive shaft condition and connection.