NTISthis.com

Evidence Guide: AURMTJ001 - Select and prepare motor sport competition vehicle tyres and wheels

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURMTJ001 - Select and prepare motor sport competition vehicle tyres and wheels

What evidence can you provide to prove your understanding of each of the following citeria?

Determine and select competition vehicle tyres and wheels

  1. Job requirements are determined from workplace instructions
  2. Supplementary regulations and component supplier specifications are sourced and interpreted to gain a competitive advantage
  3. Specifications are checked against required operating conditions to determine tyre and wheel requirements
  4. Tyre and wheel assemblies to be used are selected according to job requirements, and are documented and reported to appropriate personnel as required
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Supplementary regulations and component supplier specifications are sourced and interpreted to gain a competitive advantage

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Specifications are checked against required operating conditions to determine tyre and wheel requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tyre and wheel assemblies to be used are selected according to job requirements, and are documented and reported to appropriate personnel as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare for mounting work

  1. Tools and equipment are selected and checked for serviceability
  2. Work area is cleaned and laid out according to job and team requirements
  3. Hazards associated with the work are identified and risks are managed according to safety requirements
Tools and equipment are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned and laid out according to job and team requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed according to safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Mount tyre and wheel assembly to vehicle

  1. Mounting surfaces and threaded components are cleaned, checked for damage, and treated as required
  2. Tyre and wheel assemblies are selected from stock according to markings and checked against criteria for event
  3. Tyre and wheel assemblies are inspected for serviceability according to manufacturer and team procedures
  4. Selected tyres and wheels are mounted to vehicle according to manufacturer specifications and procedures and safety requirements
  5. Fasteners are tensioned according to component supplier specifications, and fastener locking device is engaged as required according to safety requirements
  6. Accurate and complete fitting is checked during and after installation according to manufacturer and team procedures
  7. Problems with tyre and wheel assemblies are reported to appropriate personnel
Mounting surfaces and threaded components are cleaned, checked for damage, and treated as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tyre and wheel assemblies are selected from stock according to markings and checked against criteria for event

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tyre and wheel assemblies are inspected for serviceability according to manufacturer and team procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Selected tyres and wheels are mounted to vehicle according to manufacturer specifications and procedures and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fasteners are tensioned according to component supplier specifications, and fastener locking device is engaged as required according to safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Accurate and complete fitting is checked during and after installation according to manufacturer and team procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Problems with tyre and wheel assemblies are reported to appropriate personnel

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Conduct pre-race tyre and wheel preparation

  1. Recommended cold tyre inflation pressures and optimum operating pressure requirements are sourced and interpreted
  2. Tyre inflation pressures are set to specifications according to manufacturer specifications, team procedures and safety requirements
  3. Base line tyre temperature and ambient and traction surface temperatures are measured and documented
  4. Tyres are buffed, if specified, according to manufacturer specifications, team procedures and environmental requirements
  5. Tyre warmers are fitted and turned on, if specified and allowed, according to manufacturer and team procedures
Recommended cold tyre inflation pressures and optimum operating pressure requirements are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tyre inflation pressures are set to specifications according to manufacturer specifications, team procedures and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Base line tyre temperature and ambient and traction surface temperatures are measured and documented

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tyres are buffed, if specified, according to manufacturer specifications, team procedures and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tyre warmers are fitted and turned on, if specified and allowed, according to manufacturer and team procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Conduct post-race tyre and wheel maintenance

  1. Tyre pressures and temperatures are checked, tyre contact surface is analysed for handling and wear indications, and data is recorded according to team procedures
  2. Driver or rider is questioned for assessment of vehicle handling characteristics and data is recorded according to team procedures
  3. Additional data is sourced as required, and corresponding changes to tyres and wheels required for next race are determined
  4. Tyres are changed to different compound or pattern as required and according to manufacturer specifications and team procedures
  5. Removed tyres are tagged or marked for data audit trail according to team procedures
Tyre pressures and temperatures are checked, tyre contact surface is analysed for handling and wear indications, and data is recorded according to team procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Driver or rider is questioned for assessment of vehicle handling characteristics and data is recorded according to team procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Additional data is sourced as required, and corresponding changes to tyres and wheels required for next race are determined

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tyres are changed to different compound or pattern as required and according to manufacturer specifications and team procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Removed tyres are tagged or marked for data audit trail according to team procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Tyres are packed and stored according to team procedures
  2. Tyre and wheel stock inventory is assessed, documented and reported to appropriate personnel
  3. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  4. Tools and equipment are checked and stored according to workplace procedures
  5. Workplace documentation is processed according to workplace and team procedures
Tyres are packed and stored according to team procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tyre and wheel stock inventory is assessed, documented and reported to appropriate personnel

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace and team procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Determine and select competition vehicle tyres and wheels

  1. Job requirements are determined from workplace instructions
  2. Supplementary regulations and component supplier specifications are sourced and interpreted to gain a competitive advantage
  3. Specifications are checked against required operating conditions to determine tyre and wheel requirements
  4. Tyre and wheel assemblies to be used are selected according to job requirements, and are documented and reported to appropriate personnel as required
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Supplementary regulations and component supplier specifications are sourced and interpreted to gain a competitive advantage

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Specifications are checked against required operating conditions to determine tyre and wheel requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tyre and wheel assemblies to be used are selected according to job requirements, and are documented and reported to appropriate personnel as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare for mounting work

  1. Tools and equipment are selected and checked for serviceability
  2. Work area is cleaned and laid out according to job and team requirements
  3. Hazards associated with the work are identified and risks are managed according to safety requirements
Tools and equipment are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned and laid out according to job and team requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed according to safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Mount tyre and wheel assembly to vehicle

  1. Mounting surfaces and threaded components are cleaned, checked for damage, and treated as required
  2. Tyre and wheel assemblies are selected from stock according to markings and checked against criteria for event
  3. Tyre and wheel assemblies are inspected for serviceability according to manufacturer and team procedures
  4. Selected tyres and wheels are mounted to vehicle according to manufacturer specifications and procedures and safety requirements
  5. Fasteners are tensioned according to component supplier specifications, and fastener locking device is engaged as required according to safety requirements
  6. Accurate and complete fitting is checked during and after installation according to manufacturer and team procedures
  7. Problems with tyre and wheel assemblies are reported to appropriate personnel
Mounting surfaces and threaded components are cleaned, checked for damage, and treated as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tyre and wheel assemblies are selected from stock according to markings and checked against criteria for event

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tyre and wheel assemblies are inspected for serviceability according to manufacturer and team procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Selected tyres and wheels are mounted to vehicle according to manufacturer specifications and procedures and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fasteners are tensioned according to component supplier specifications, and fastener locking device is engaged as required according to safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Accurate and complete fitting is checked during and after installation according to manufacturer and team procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Problems with tyre and wheel assemblies are reported to appropriate personnel

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Conduct pre-race tyre and wheel preparation

  1. Recommended cold tyre inflation pressures and optimum operating pressure requirements are sourced and interpreted
  2. Tyre inflation pressures are set to specifications according to manufacturer specifications, team procedures and safety requirements
  3. Base line tyre temperature and ambient and traction surface temperatures are measured and documented
  4. Tyres are buffed, if specified, according to manufacturer specifications, team procedures and environmental requirements
  5. Tyre warmers are fitted and turned on, if specified and allowed, according to manufacturer and team procedures
Recommended cold tyre inflation pressures and optimum operating pressure requirements are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tyre inflation pressures are set to specifications according to manufacturer specifications, team procedures and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Base line tyre temperature and ambient and traction surface temperatures are measured and documented

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tyres are buffed, if specified, according to manufacturer specifications, team procedures and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tyre warmers are fitted and turned on, if specified and allowed, according to manufacturer and team procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Conduct post-race tyre and wheel maintenance

  1. Tyre pressures and temperatures are checked, tyre contact surface is analysed for handling and wear indications, and data is recorded according to team procedures
  2. Driver or rider is questioned for assessment of vehicle handling characteristics and data is recorded according to team procedures
  3. Additional data is sourced as required, and corresponding changes to tyres and wheels required for next race are determined
  4. Tyres are changed to different compound or pattern as required and according to manufacturer specifications and team procedures
  5. Removed tyres are tagged or marked for data audit trail according to team procedures
Tyre pressures and temperatures are checked, tyre contact surface is analysed for handling and wear indications, and data is recorded according to team procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Driver or rider is questioned for assessment of vehicle handling characteristics and data is recorded according to team procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Additional data is sourced as required, and corresponding changes to tyres and wheels required for next race are determined

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tyres are changed to different compound or pattern as required and according to manufacturer specifications and team procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Removed tyres are tagged or marked for data audit trail according to team procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Tyres are packed and stored according to team procedures
  2. Tyre and wheel stock inventory is assessed, documented and reported to appropriate personnel
  3. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  4. Tools and equipment are checked and stored according to workplace procedures
  5. Workplace documentation is processed according to workplace and team procedures
Tyres are packed and stored according to team procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tyre and wheel stock inventory is assessed, documented and reported to appropriate personnel

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace and team procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Determine and select competition vehicle tyres and wheels

1.1 Job requirements are determined from workplace instructions

1.2 Supplementary regulations and component supplier specifications are sourced and interpreted to gain a competitive advantage

1.3 Specifications are checked against required operating conditions to determine tyre and wheel requirements

1.4 Tyre and wheel assemblies to be used are selected according to job requirements, and are documented and reported to appropriate personnel as required

2. Prepare for mounting work

2.1 Tools and equipment are selected and checked for serviceability

2.2 Work area is cleaned and laid out according to job and team requirements

2.3 Hazards associated with the work are identified and risks are managed according to safety requirements

3. Mount tyre and wheel assembly to vehicle

3.1 Mounting surfaces and threaded components are cleaned, checked for damage, and treated as required

3.2 Tyre and wheel assemblies are selected from stock according to markings and checked against criteria for event

3.3 Tyre and wheel assemblies are inspected for serviceability according to manufacturer and team procedures

3.4 Selected tyres and wheels are mounted to vehicle according to manufacturer specifications and procedures and safety requirements

3.5 Fasteners are tensioned according to component supplier specifications, and fastener locking device is engaged as required according to safety requirements

3.6 Accurate and complete fitting is checked during and after installation according to manufacturer and team procedures

3.7 Problems with tyre and wheel assemblies are reported to appropriate personnel

4. Conduct pre-race tyre and wheel preparation

4.1 Recommended cold tyre inflation pressures and optimum operating pressure requirements are sourced and interpreted

4.2 Tyre inflation pressures are set to specifications according to manufacturer specifications, team procedures and safety requirements

4.3 Base line tyre temperature and ambient and traction surface temperatures are measured and documented

4.4 Tyres are buffed, if specified, according to manufacturer specifications, team procedures and environmental requirements

4.5 Tyre warmers are fitted and turned on, if specified and allowed, according to manufacturer and team procedures

5. Conduct post-race tyre and wheel maintenance

5.1 Tyre pressures and temperatures are checked, tyre contact surface is analysed for handling and wear indications, and data is recorded according to team procedures

5.2 Driver or rider is questioned for assessment of vehicle handling characteristics and data is recorded according to team procedures

5.3 Additional data is sourced as required, and corresponding changes to tyres and wheels required for next race are determined

5.4 Tyres are changed to different compound or pattern as required and according to manufacturer specifications and team procedures

5.5 Removed tyres are tagged or marked for data audit trail according to team procedures

6. Complete work processes

6.1 Tyres are packed and stored according to team procedures

6.2 Tyre and wheel stock inventory is assessed, documented and reported to appropriate personnel

6.3 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

6.4 Tools and equipment are checked and stored according to workplace procedures

6.5 Workplace documentation is processed according to workplace and team procedures

Required Skills and Knowledge

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Determine and select competition vehicle tyres and wheels

1.1 Job requirements are determined from workplace instructions

1.2 Supplementary regulations and component supplier specifications are sourced and interpreted to gain a competitive advantage

1.3 Specifications are checked against required operating conditions to determine tyre and wheel requirements

1.4 Tyre and wheel assemblies to be used are selected according to job requirements, and are documented and reported to appropriate personnel as required

2. Prepare for mounting work

2.1 Tools and equipment are selected and checked for serviceability

2.2 Work area is cleaned and laid out according to job and team requirements

2.3 Hazards associated with the work are identified and risks are managed according to safety requirements

3. Mount tyre and wheel assembly to vehicle

3.1 Mounting surfaces and threaded components are cleaned, checked for damage, and treated as required

3.2 Tyre and wheel assemblies are selected from stock according to markings and checked against criteria for event

3.3 Tyre and wheel assemblies are inspected for serviceability according to manufacturer and team procedures

3.4 Selected tyres and wheels are mounted to vehicle according to manufacturer specifications and procedures and safety requirements

3.5 Fasteners are tensioned according to component supplier specifications, and fastener locking device is engaged as required according to safety requirements

3.6 Accurate and complete fitting is checked during and after installation according to manufacturer and team procedures

3.7 Problems with tyre and wheel assemblies are reported to appropriate personnel

4. Conduct pre-race tyre and wheel preparation

4.1 Recommended cold tyre inflation pressures and optimum operating pressure requirements are sourced and interpreted

4.2 Tyre inflation pressures are set to specifications according to manufacturer specifications, team procedures and safety requirements

4.3 Base line tyre temperature and ambient and traction surface temperatures are measured and documented

4.4 Tyres are buffed, if specified, according to manufacturer specifications, team procedures and environmental requirements

4.5 Tyre warmers are fitted and turned on, if specified and allowed, according to manufacturer and team procedures

5. Conduct post-race tyre and wheel maintenance

5.1 Tyre pressures and temperatures are checked, tyre contact surface is analysed for handling and wear indications, and data is recorded according to team procedures

5.2 Driver or rider is questioned for assessment of vehicle handling characteristics and data is recorded according to team procedures

5.3 Additional data is sourced as required, and corresponding changes to tyres and wheels required for next race are determined

5.4 Tyres are changed to different compound or pattern as required and according to manufacturer specifications and team procedures

5.5 Removed tyres are tagged or marked for data audit trail according to team procedures

6. Complete work processes

6.1 Tyres are packed and stored according to team procedures

6.2 Tyre and wheel stock inventory is assessed, documented and reported to appropriate personnel

6.3 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

6.4 Tools and equipment are checked and stored according to workplace procedures

6.5 Workplace documentation is processed according to workplace and team procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

select, prepare and fit tyres and wheels to two different motor sport competition vehicles in differing conditions, including:

vehicle type

track surface

weather conditions.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to selecting and preparing motor sport tyres and wheels, including procedures for:

manually handling tyres and wheels

selecting and using personal protective equipment (PPE)

environmental requirements, including procedures for trapping, storing and disposing of contaminants released during pre-race preparation and post-race maintenance of tyres and wheels

key requirements of controlling body rules, category rules and supplementary regulations relating to selecting and preparing tyres and wheels for motor sport applications

types, function, application and limitations of wheels and tyres, including:

handling characteristics

supplier tyre markings

procedures for selecting tyres and wheels for motor sport applications, including tyre and wheel considerations for:

vehicle type

track surface

weather conditions

mounting procedures of wheel assemblies to vehicles, including:

tyre and wheel serviceability inspection techniques

mounting sequences and techniques

types of fasteners and locking devices

pre-race tyre and wheel preparation procedures, including:

procedures for checking tyre, track and ambient temperatures

cold and operating or hot pressures of tyres

buffing procedures for tyres

warming procedures for tyres

post-race tyre analysis procedures, including:

tyre contact surface wear analysis

driver or rider questioning techniques

tyre contact surface cleaning procedures

tyre measurement, including stagger calculations

tyre storage procedures, including tyre and wheel stock inventory documentation methods.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Specifications must include:

design

quality

materials

equipment

quantities.

Safety requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

manually handling tyres and wheels

selecting and using personal protective equipment (PPE).

Markings must include those of:

scrutineer or category official

team.

Environmental requirements must include:

procedures for trapping, storing and disposing of contaminants released during pre-race preparation and post-race maintenance of tyres and wheels.