NTISthis.com

Evidence Guide: AURMTS001 - Construct hose and pipe assemblies for competition vehicles

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURMTS001 - Construct hose and pipe assemblies for competition vehicles

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare for work

  1. Job requirements are determined from competition information
  2. Materials and consumables are selected and checked according to application and procedures to minimise waste material
  3. Tools and equipment are selected and checked for serviceability
  4. Hazards associated with the work are identified and risks are managed
  5. Work area is cleaned and prepared according to job requirements
Job requirements are determined from competition information

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Materials and consumables are selected and checked according to application and procedures to minimise waste material

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned and prepared according to job requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Construct hose and pipe assemblies

  1. Hose and pipe length is measured and material requirements are calculated
  2. Hose and pipe are cut to length according to according to team procedures and safety requirements
  3. Hose and pipe are bent to conform to fitting requirements according to team procedures and safety requirements
  4. Hose and pipe fittings are connected according to component supplier specifications and procedures and team requirements
  5. Hose and pipe assembly is cleaned and pressure-tested according to component supplier specifications, team procedures and safety requirements
Hose and pipe length is measured and material requirements are calculated

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hose and pipe are cut to length according to according to team procedures and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hose and pipe are bent to conform to fitting requirements according to team procedures and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hose and pipe fittings are connected according to component supplier specifications and procedures and team requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hose and pipe assembly is cleaned and pressure-tested according to component supplier specifications, team procedures and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work is to workplace expectations and vehicle is presented ready for use
  2. Work area is cleaned, waste and non-recyclable material is disposed of and recyclable material is collected
  3. Tools and equipment are checked and stored according to workplace procedures
  4. Surplus components and consumables are tagged and stored
  5. Workplace documentation is processed according to team procedures
Final inspection is made to ensure work is to workplace expectations and vehicle is presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable material is disposed of and recyclable material is collected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Surplus components and consumables are tagged and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to team procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare for work

  1. Job requirements are determined from competition information
  2. Materials and consumables are selected and checked according to application and procedures to minimise waste material
  3. Tools and equipment are selected and checked for serviceability
  4. Hazards associated with the work are identified and risks are managed
  5. Work area is cleaned and prepared according to job requirements
Job requirements are determined from competition information

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Materials and consumables are selected and checked according to application and procedures to minimise waste material

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned and prepared according to job requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Construct hose and pipe assemblies

  1. Hose and pipe length is measured and material requirements are calculated
  2. Hose and pipe are cut to length according to according to team procedures and safety requirements
  3. Hose and pipe are bent to conform to fitting requirements according to team procedures and safety requirements
  4. Hose and pipe fittings are connected according to component supplier specifications and procedures and team requirements
  5. Hose and pipe assembly is cleaned and pressure-tested according to component supplier specifications, team procedures and safety requirements
Hose and pipe length is measured and material requirements are calculated

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hose and pipe are cut to length according to according to team procedures and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hose and pipe are bent to conform to fitting requirements according to team procedures and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hose and pipe fittings are connected according to component supplier specifications and procedures and team requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hose and pipe assembly is cleaned and pressure-tested according to component supplier specifications, team procedures and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work is to workplace expectations and vehicle is presented ready for use
  2. Work area is cleaned, waste and non-recyclable material is disposed of and recyclable material is collected
  3. Tools and equipment are checked and stored according to workplace procedures
  4. Surplus components and consumables are tagged and stored
  5. Workplace documentation is processed according to team procedures
Final inspection is made to ensure work is to workplace expectations and vehicle is presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable material is disposed of and recyclable material is collected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Surplus components and consumables are tagged and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to team procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare for work

1.1 Job requirements are determined from competition information

1.2 Materials and consumables are selected and checked according to application and procedures to minimise waste material

1.3 Tools and equipment are selected and checked for serviceability

1.4 Hazards associated with the work are identified and risks are managed

1.5 Work area is cleaned and prepared according to job requirements

2. Construct hose and pipe assemblies

2.1 Hose and pipe length is measured and material requirements are calculated

2.2 Hose and pipe are cut to length according to according to team procedures and safety requirements

2.3 Hose and pipe are bent to conform to fitting requirements according to team procedures and safety requirements

2.4 Hose and pipe fittings are connected according to component supplier specifications and procedures and team requirements

2.5 Hose and pipe assembly is cleaned and pressure-tested according to component supplier specifications, team procedures and safety requirements

3. Complete work processes

3.1 Final inspection is made to ensure work is to workplace expectations and vehicle is presented ready for use

3.2 Work area is cleaned, waste and non-recyclable material is disposed of and recyclable material is collected

3.3 Tools and equipment are checked and stored according to workplace procedures

3.4 Surplus components and consumables are tagged and stored

3.5 Workplace documentation is processed according to team procedures

Required Skills and Knowledge

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare for work

1.1 Job requirements are determined from competition information

1.2 Materials and consumables are selected and checked according to application and procedures to minimise waste material

1.3 Tools and equipment are selected and checked for serviceability

1.4 Hazards associated with the work are identified and risks are managed

1.5 Work area is cleaned and prepared according to job requirements

2. Construct hose and pipe assemblies

2.1 Hose and pipe length is measured and material requirements are calculated

2.2 Hose and pipe are cut to length according to according to team procedures and safety requirements

2.3 Hose and pipe are bent to conform to fitting requirements according to team procedures and safety requirements

2.4 Hose and pipe fittings are connected according to component supplier specifications and procedures and team requirements

2.5 Hose and pipe assembly is cleaned and pressure-tested according to component supplier specifications, team procedures and safety requirements

3. Complete work processes

3.1 Final inspection is made to ensure work is to workplace expectations and vehicle is presented ready for use

3.2 Work area is cleaned, waste and non-recyclable material is disposed of and recyclable material is collected

3.3 Tools and equipment are checked and stored according to workplace procedures

3.4 Surplus components and consumables are tagged and stored

3.5 Workplace documentation is processed according to team procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

construct and test the following competition vehicle hose and pipe assemblies:

two different hose assemblies

two different pipe assemblies.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to constructing hose and pipe assemblies for competition vehicles, including procedures for safely use:

hose and pipe cutting equipment or machinery

equipment for joining hoses and pipes to connectors

types of and procedures for selecting hoses, pipes and fittings, including:

sizing of hoses, pipes and fittings, including Army-Navy (AN) thread dash number, Society of Automotive Engineers (SAE) and National Pipe Thread (NPT)

swaged and reusable fittings

hose and pipe material and construction

compatibility of hose and pipe material with fuel, lubricants, coolants, chemicals and heat conditions

construction procedures for hose and pipe assemblies, including:

methods for locating and determining the layout of hose and pipe assemblies

hose and pipe assembly measurement and cutting procedures

hose and pipe bending and flaring procedures

hose and pipe assembly procedures

protection methods for hose and pipe assemblies

post-construction testing procedures, including hose and pipe assembly flushing and testing procedures

storage and maintenance procedures for hose and pipe assemblies.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Competition information must include:

team instructions

supplementary regulations and component supplier specifications, including allowable design, quality, materials, equipment and quantities.

Safety requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for safely use:

hose and pipe cutting equipment or machinery

equipment for joining hoses and pipes to connectors.