The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare to service and repair reciprocating cutting system
|
|
Job requirements are determined from workplace instructions Completed |
Evidence:
|
Service and repair procedures and information are sourced and interpreted Completed |
Evidence:
|
Hazards associated with the work are identified and risks are managed Completed |
Evidence:
|
Tools, equipment and materials are selected and checked according to workplace procedures Completed |
Evidence:
|
Determine service and repair requirements of reciprocating cutting system
|
|
System is inspected and tested according to workplace procedures, manufacturer specifications and safety requirements Completed |
Evidence:
|
Faults are identified from inspection and causes of faults are determined Completed |
Evidence:
|
Inspection findings and test results are reported according to workplace procedures, and include recommendations for necessary service, repair or adjustment Completed |
Evidence:
|
Authorisation to proceed with service and repair is obtained according to workplace procedures Completed |
Evidence:
|
Carry out service and repair activities
|
|
Service and repair options are analysed and those most appropriate to the circumstances are selected Completed |
Evidence:
|
Tools, equipment and materials are selected and checked Completed |
Evidence:
|
Components are removed and inspected for serviceability according to manufacturer specifications, workplace procedures, and safety and environmental requirements Completed |
Evidence:
|
Reusable, repaired and replacement components are fitted and adjusted according to manufacturer specifications and workplace procedures Completed |
Evidence:
|
Check reciprocating cutting system for normal operation
|
|
System is operated and compared to manufacturer specifications according to workplace procedures and safety requirements Completed |
Evidence:
|
Adjustments are made as required and reciprocating cutting system is re-tested Completed |
Evidence:
|
Complete work processes
|
|
Final inspection is made to ensure work is to workplace expectations and equipment is presented ready for use, including protective guards, cowlings and safety features Completed |
Evidence:
|
Work area is cleaned, waste and non-recyclable materials are disposed of and recyclable material is collected Completed |
Evidence:
|
Tools and equipment are checked and stored according to workplace procedures Completed |
Evidence:
|
Workplace documentation is processed according to workplace procedures Completed |
Evidence:
|
Prepare to service and repair reciprocating cutting system
|
|
Job requirements are determined from workplace instructions Completed |
Evidence:
|
Service and repair procedures and information are sourced and interpreted Completed |
Evidence:
|
Hazards associated with the work are identified and risks are managed Completed |
Evidence:
|
Tools, equipment and materials are selected and checked according to workplace procedures Completed |
Evidence:
|
Determine service and repair requirements of reciprocating cutting system
|
|
System is inspected and tested according to workplace procedures, manufacturer specifications and safety requirements Completed |
Evidence:
|
Faults are identified from inspection and causes of faults are determined Completed |
Evidence:
|
Inspection findings and test results are reported according to workplace procedures, and include recommendations for necessary service, repair or adjustment Completed |
Evidence:
|
Authorisation to proceed with service and repair is obtained according to workplace procedures Completed |
Evidence:
|
Carry out service and repair activities
|
|
Service and repair options are analysed and those most appropriate to the circumstances are selected Completed |
Evidence:
|
Tools, equipment and materials are selected and checked Completed |
Evidence:
|
Components are removed and inspected for serviceability according to manufacturer specifications, workplace procedures, and safety and environmental requirements Completed |
Evidence:
|
Reusable, repaired and replacement components are fitted and adjusted according to manufacturer specifications and workplace procedures Completed |
Evidence:
|
Check reciprocating cutting system for normal operation
|
|
System is operated and compared to manufacturer specifications according to workplace procedures and safety requirements Completed |
Evidence:
|
Adjustments are made as required and reciprocating cutting system is re-tested Completed |
Evidence:
|
Complete work processes
|
|
Final inspection is made to ensure work is to workplace expectations and equipment is presented ready for use, including protective guards, cowlings and safety features Completed |
Evidence:
|
Work area is cleaned, waste and non-recyclable materials are disposed of and recyclable material is collected Completed |
Evidence:
|
Tools and equipment are checked and stored according to workplace procedures Completed |
Evidence:
|
Workplace documentation is processed according to workplace procedures Completed |
Evidence:
|