NTISthis.com

Evidence Guide: AURT204670A - Inspect and service emission control systems

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURT204670A - Inspect and service emission control systems

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to undertake a service on an emission control system

  1. The nature and scope of the work requirements are identified and confirmed
  2. OH&S requirements, including individual State/Territory regulatory requirements and personal protection needs are observed throughout the work
  3. Procedures and information such as workshop manuals and specifications, and tooling required, are sourced
  4. National Environmental Protection Measure for Diesel Vehicles (Guidelines) is sourced and observed throughout the work as appropriate to tasks
  5. Method options are analysed and those most appropriate to the circumstances are selected and prepared
  6. Technical and/or calibration requirements for service are sourced and support equipment is identified and prepared
The nature and scope of the work requirements are identified and confirmed

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

OH&S requirements, including individual State/Territory regulatory requirements and personal protection needs are observed throughout the work

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Procedures and information such as workshop manuals and specifications, and tooling required, are sourced

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

National Environmental Protection Measure for Diesel Vehicles (Guidelines) is sourced and observed throughout the work as appropriate to tasks

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Method options are analysed and those most appropriate to the circumstances are selected and prepared

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Technical and/or calibration requirements for service are sourced and support equipment is identified and prepared

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Service emission control systems

  1. Testing equipment is selected
  2. Tests are performed and results analysed in accordance with manufacturer/component supplier specifications
  3. Emission control system servicing is carried out according to industry regulations/guidelines, OH&S legislation, legislation and enterprise procedures/policies
  4. Correct information is accessed and interpreted from manufacturer/component supplier specifications
  5. Emission control systems service is completed without causing damage to any component or system
Testing equipment is selected

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Tests are performed and results analysed in accordance with manufacturer/component supplier specifications

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Emission control system servicing is carried out according to industry regulations/guidelines, OH&S legislation, legislation and enterprise procedures/policies

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Correct information is accessed and interpreted from manufacturer/component supplier specifications

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Emission control systems service is completed without causing damage to any component or system

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Prepare vehicle/ equipment for delivery to customer

  1. Service schedule documentation is completed
  2. Final inspection is made to ensure safety features are in place
  3. Final inspection is made to ensure work is to workplace expectations
  4. Vehicle/equipment is presented to workplace expectations
  5. Job card is processed in accordance with workplace procedures
Service schedule documentation is completed

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Final inspection is made to ensure safety features are in place

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Final inspection is made to ensure work is to workplace expectations

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Vehicle/equipment is presented to workplace expectations

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Job card is processed in accordance with workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

It is essential that competence is fully observed and there is ability to transfer competence to changing circumstances and to respond to unusual situations in the critical aspects of:

observing safety procedures and requirements

communicating effectively with others involved in or affected by the work

selecting methods and techniques appropriate to the circumstances

completing preparatory activity in a systematic manner

accurately interpreting test results

identification of application, purpose and operating principles

conducting inspection, servicing and operational testing in accordance with workplace and manufacturer/component supplier specifications

completing work within the agreed timeframe

vehicle/equipment is presented to customer in compliance with workplace requirements

Context of, and specific resources for assessment

Application of competence is to be assessed in the workplace or simulated worksite

Assessment is to occur using standard and authorised work practices, safety requirements and environmental constraints

Assessment is to comply with regulatory requirements, including Australian Standards

The following resources should be made available:

workplace location or simulated workplace

material relevant to inspection and servicing of emission control systems

equipment, hand and power tooling appropriate to inspection and servicing of emission control systems

activities covering mandatory task requirements

specifications and work instructions

Method of assessment

Assessment must satisfy the endorsed assessment guidelines of the automotive industry's RS&R Training Package

Assessment methods must confirm consistency and accuracy of performance together with application of underpinning knowledge

Assessment must be by direct observation of tasks, with questioning on underpinning knowledge and it must also reinforce the integration of key competencies

Assessment may be applied under project related conditions and require evidence of process

Assessment must confirm a reasonable inference that competence is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances

It is preferable that assessment reflects a process rather than an event and occurs over a period of time to cover varying quality circumstances. Evidence of performance may be provided by customers, team leaders/members or other persons subject to agreed authentication arrangements

Competence in this unit may be assessed in conjunction with other functional units which together form part of the holistic work role

Guidance information for assessment

Required Skills and Knowledge

Required skills

apply research and interpretive skills sufficient to locate, interpret and apply manufacturer/component supplier procedures, workplace policies and procedures

apply analytical skills required for identification and analysis of technical information

apply plain English literacy and communication skills in relation to dealing with customers and team members

apply questioning and active listening skills for example when obtaining information from customers

apply oral communication skills sufficient to convey information and concepts to customers

apply planning and organising skills to own work activities, including making good use of time and resources, sorting out priorities and monitoring one's own performance

interact effectively with other persons both on a one-to-one basis and in groups, including understanding and responding to the needs of a customer and working effectively as a member of a team to achieve a shared goa

establish safe and effective work processes which anticipate and/or resolve problems and downtime, to systematically develop solutions to avoid or minimise reworking and avoid wastage

use mathematical ideas and techniques to correctly calculate time, assess tolerances, apply accurate measurements, calculate material requirements and establish quality checks

use workplace technology related to inspection and servicing of emission control systems, including the use of diagnostic and servicing tooling and equipment, measuring equipment, computerised technology and communication devices and the reporting/documenting of results

Required knowledge

A working knowledge of:

OH&S regulations/requirements, equipment, material and personal safety requirements

National Environment Protection Measures for Diesel Vehicles as applicable to tasks

identification of motor vehicle emissions and their effects on the environment

identification of application, purpose and operating principles

principles of emission control and the reduction of HC, NOx, CO, CO2, particulates and smog

types and of emission systems and components

legislation

techniques for the interpretation of technical information, graphic symbols and diagrams

types and layout of service/repair manuals (hard copy and electronic)

testing procedures

servicing procedures

enterprise quality procedures

work organisation and planning processes

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Inspection methods

Inspection methods include:

road testing and dynamometer testing, exhaust gas testing

visual, aural and functional assessments (including: damage, corrosion, air leaks, wear, testing of electrical circuits)

measurements

electronic system tests

Specific requirements

Specific requirements: may include sensing and control systems, including carbon canisters, mechanical devices, catalytic converters, electronic sensors, EGR values

Servicing

Servicing to include fluids, filters, adjustments and operational testing, visual inspections and documents

OH&S

OH&S requirements are to be in accordance with legislation/regulations/codes of practice and enterprise safety policies and procedures. This may include protective clothing and equipment, use of tooling and equipment, workplace environment and safety, handling of material, use of fire fighting equipment, enterprise first aid, hazard control and hazardous materials and substances

Personal protective equipment

Personal protective equipment is to include that prescribed under legislation/regulations/codes of practice and workplace policies and practices

Safe operating procedures

Safe operating procedures are to include, but are not limited to the conduct of operational risk assessment and treatments associated with vehicular movement, toxic substances, electrical safety, machinery movement and operation, manual and mechanical lifting and shifting, working in proximity to others and site visitors

Emergency procedures

Emergency procedures related to this unit are to include, but are not limited to emergency shutdown and stopping of equipment, extinguishing fires, enterprise first aid requirements and site evacuation

Environmental requirements

Environmental requirements are to include but are not limited to waste management, pollution protection and clean-up management

Quality requirements

Quality requirements are to include, but are not limited to regulations, including Australian Standards, internal company quality policy and standards and enterprise operations and procedures

Statutory/regulatory Authorities

Statutory/regulatory authorities may include Federal, State/Territory and local authorities administering acts, regulations and codes of practice

Tooling and equipment

Tooling and equipment may include hand tooling, testing equipment, including exhaust gas analysers and hand held meters, power tooling, specialist tooling for testing, removal or adjustment, and dynamometers

Materials

Materials may include spare parts, lubricants, fluids, filters and cleaning materials

Communications

Communications are to include, but are not limited to verbal and visual instructions and fault reporting and may include site specific instructions, written instructions, plans or instructions related to job/task, telephones and pagers

Information/documents

Sources of information/documents may include:

verbal or written and graphical instructions, signage, work schedules/plans/specifications, work bulletins, memos, material safety data sheets, diagrams or sketches

safe work procedures related to inspecting and servicing emission control systems

regulatory/legislative requirements pertaining to the automotive industry, including Australian Design Rules, Environment Protection Regulations (Diesel Fuels) and National Environment Protection for Diesel Vehicle Guidelines

engineer's design specifications and instructions

organisation work specifications and requirements

instructions issued by authorised enterprise or external persons

Australian Standards