NTISthis.com

Evidence Guide: AURT300471A - Inspect, service and repair harvesting equipment

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURT300471A - Inspect, service and repair harvesting equipment

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to inspect harvesting equipment

  1. Nature and scope of work requirements are identified and confirmed
  2. OH&S requirements, including State/Territory regulatory requirements and personal protection needs are observed throughout work
  3. Procedures and information such as workshop manuals, specifications, and tooling, are sourced
  4. Method options are analysed and those most appropriate to the circumstances are selected and prepared
  5. Technical and/or calibration requirements for inspecting harvesting equipment are sourced and support equipment is identified and prepared
  6. Warnings in relation to working with harvesting equipment observed
Nature and scope of work requirements are identified and confirmed

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

OH&S requirements, including State/Territory regulatory requirements and personal protection needs are observed throughout work

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Procedures and information such as workshop manuals, specifications, and tooling, are sourced

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Method options are analysed and those most appropriate to the circumstances are selected and prepared

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Technical and/or calibration requirements for inspecting harvesting equipment are sourced and support equipment is identified and prepared

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Warnings in relation to working with harvesting equipment observed

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Conduct inspection and analyse results

  1. Methods for inspection are implemented in accordance with workplace procedures and manufacturer/component supplier specifications
  2. Inspection results are compared with manufacturer/ component supplier specifications to indicate compliance or non-compliance
  3. Results are documented with evidence and supporting information and recommendation(s) made
  4. Report is processed in accordance with workplace procedures
Methods for inspection are implemented in accordance with workplace procedures and manufacturer/component supplier specifications

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Inspection results are compared with manufacturer/ component supplier specifications to indicate compliance or non-compliance

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Results are documented with evidence and supporting information and recommendation(s) made

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Report is processed in accordance with workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Service and repair harvesting equipment

  1. OH&S requirements, including individual State/Territory regulatory requirements and personal protection needs are observed throughout the work
  2. Procedures and information are identified and sourced
  3. Technical and tool requirements for service and repair are identified and support equipment is identified and prepared
  4. Methods for service and repair are implemented in accordance with workplace procedures and manufacturer/ component supplier specifications
  5. Adjustments made during the service and repair are in accordance with manufacturer/component supplier specifications
OH&S requirements, including individual State/Territory regulatory requirements and personal protection needs are observed throughout the work

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Procedures and information are identified and sourced

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Technical and tool requirements for service and repair are identified and support equipment is identified and prepared

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Methods for service and repair are implemented in accordance with workplace procedures and manufacturer/ component supplier specifications

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Adjustments made during the service and repair are in accordance with manufacturer/component supplier specifications

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Prepare equipment for operation

  1. Variable operating parameters are identified from manufacturer/component supplier specifications and analysis of proposed working environment and conditions
  2. Equipment variables, including management systems settings, controls and monitoring systems are established and prepared for proposed operations
  3. Equipment and systems are test run and final adjustments are made to achieve and maintain operating parameters
  4. Regulatory requirements, including equipment safety and environmental compliance, are applied and satisfied
Variable operating parameters are identified from manufacturer/component supplier specifications and analysis of proposed working environment and conditions

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Equipment variables, including management systems settings, controls and monitoring systems are established and prepared for proposed operations

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Equipment and systems are test run and final adjustments are made to achieve and maintain operating parameters

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Regulatory requirements, including equipment safety and environmental compliance, are applied and satisfied

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Prepare equipment for use or storage

  1. Service/repairs schedule documentation is completed
  2. Final inspection is made to ensure protective guards, safety features and cowlings are in place
  3. Final inspection is made to ensure work is to workplace expectations
  4. Equipment is cleaned for use or storage to workplace expectations
  5. Job card is processed in accordance with workplace procedures
Service/repairs schedule documentation is completed

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Final inspection is made to ensure protective guards, safety features and cowlings are in place

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Final inspection is made to ensure work is to workplace expectations

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Equipment is cleaned for use or storage to workplace expectations

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Job card is processed in accordance with workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

It is essential that competence in this unit signifies ability to transfer competence to changing circumstances and to respond to unusual circumstances in the critical aspects of:

observing safety procedures and requirements

communicating effectively with others involved in or affected by the work

selecting methods and techniques appropriate to the circumstances

completing preparatory activity in a systematic manner

completing a minimum of four full cycles requiring inspection, servicing, repair and preparing of harvesting equipment for operations, ensuring:

accurate interpretation of inspection results

completion of inspection, service and repair in accordance with workplace and manufacturer/ component supplier requirements

completion of work within workplace timeframes

preparation of equipment for operations

equipment presentation to customer in compliance with workplace requirements

Context of, and specific resources for assessment

Application of competence is to be assessed in the workplace or simulated worksite

Assessment is to occur using standard and authorised work practices, safety requirements and environmental constraints

Assessment is to comply with regulatory requirements, including Australian Standards

The following resources should be made available:

workplace location or simulated workplace

material relevant to the inspection/servicing and repair of harvesting equipment

equipment, hand and power tooling appropriate to the service and repair of harvesting equipment

activities covering mandatory task requirements

specifications and work instructions

Method of assessment

Assessment must satisfy the endorsed assessment guidelines of the automotive industry's RS&R Training Package

Assessment methods must confirm consistency and accuracy of performance together with application of underpinning knowledge

Assessment must be by direct observation of tasks, with questioning on underpinning knowledge and it must also reinforce the integration of key competencies

Assessment may be applied under project related conditions and require evidence of process

Assessment must confirm a reasonable inference that competence is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances

It is preferable that assessment reflects a process rather than an event and occurs over a period of time to cover varying quality circumstances. Evidence of performance may be provided by customers, team leaders/members or other persons subject to agreed authentication arrangements

Competence in this unit may be assessed in conjunction with other functional units which together form part of the holistic work role

Guidance information for assessment

Required Skills and Knowledge

Required skills

apply research and interpretive skills sufficient to locate, interpret and apply manufacturer/component supplier procedures, workplace policies and procedures

apply analytical skills for identification and analysis of technical information

apply plain English literacy and communication skills in relation to dealing with customers and team members

apply questioning and active listening skills for example when obtaining information from customers

apply oral communication skills sufficient to convey information and concepts to customers

apply planning and organising skills to own work activities, including making good use of time and resources, sorting out priorities and monitoring own performance

interact effectively with other persons both on a one-to-one basis and in groups, including understanding and responding to the needs of a customer and working effectively as a member of a team to achieve a shared goal

establish safe and effective work processes which anticipate and/or resolve problems and downtime, to systematically develop solutions to avoid or minimise reworking and avoid wastage

use mathematical ideas and techniques to correctly calculate time, assess tolerances, apply accurate measurements, calculate material requirements and establish quality checks

use workplace technology related to the servicing and repair of harvesting equipment, including the use of specialist tooling, measuring equipment, computerised technology and communication devices and the documenting/recording of results

Required knowledge

A working knowledge of:

OH&S and environmental regulations/requirements, equipment, material and personal safety requirements

dangers of working with harvesting equipment

operating principles of harvesting equipment and their relationship to each other

equipment operating parameters and the factors which will impact on these

types and layout of service/repair manuals (hard copy and electronic)

inspection procedures

service and/or repair procedures

enterprise quality procedures

work organisation and planning processes

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Harvesting equipment

Harvesting equipment may include grain, cane, cotton, rice, forage, sugar and balers

OH&S

OH&S requirements are to be in accordance with legislation/regulations/codes of practice and enterprise safety policies and procedures. This may include protective clothing and equipment, use of tooling and equipment, workplace environment and safety, handling of material, use of fire fighting equipment, enterprise first aid, hazard control and hazardous materials and substances

Personal protective equipment

Personal protective equipment is to include that prescribed under legislation/regulation/codes of practice and workplace policies and practices

Safe operating procedures

Safe operating procedures are to include, but are not limited to operational risk assessment and treatments associated with vehicular movement, toxic substances, electrical safety, machinery movement and operation, manual and mechanical lifting and shifting, working in proximity to others and site visitors

Emergency procedures

Emergency procedures related to this unit are to include but may not be limited to emergency shutdown and stopping of equipment, extinguishing fires, enterprise first aid requirements and site evacuation

Environmental requirements

Environmental requirements are to include but are not limited to waste management, machine hygiene, dust and clean-up management

Quality requirements

Quality requirements are to include, but are not limited to regulations, including Australian Standards, internal company quality policy and standards and enterprise operations and procedures

Statutory/regulatory authorities

Statutory/regulatory authorities may include Federal, State/Territory and local authorities administering acts, regulations and codes of practice

Tooling and equipment

Tooling and equipment may include hand tooling, diagnostic and monitoring systems, meters, gauges, load testing devices and pulling and pushing devices

Materials

Materials may include spare parts, lubricants, fluids and cleaning materials

Communications

Communications are to include, but are not limited to verbal and visual instructions and fault documenting and may include site specific instructions, written instructions, plans or instructions related to job/task, telephones and pagers

Information/documents

Sources of information/documents may include:

verbal or written and graphical instructions, signage, work schedules/plans/specifications, work bulletins, memos, material safety data sheets, diagrams or sketches

safe work procedures related to the inspection, servicing and repair of harvesting equipment

regulatory/legislative requirements pertaining to automotive industry, including Australian Design Rules

engineer's design specifications and instructions

organisation work specifications and requirements

instructions issued by authorised enterprise or external persons

Australian Standards