NTISthis.com

Evidence Guide: AURTTA004 - Carry out servicing operations

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURTTA004 - Carry out servicing operations

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to conduct servicing operations

  1. Job requirements are determined from workplace instructions
  2. Servicing procedures and information are sourced and interpreted
  3. Hazards associated with the work are identified and risks are managed
  4. Tools, equipment and materials are selected and checked for serviceability
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Servicing procedures and information are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment and materials are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify lubricants and fluid leakage

  1. Suitable lubricants and fluids are identified according to manufacturer specifications and workplace procedures
  2. Lubricants and fluids are handled according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  3. Fluid leakages and component faults are identified and reported according to workplace procedures as required
Suitable lubricants and fluids are identified according to manufacturer specifications and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Lubricants and fluids are handled according to manufacturer specifications, workplace procedures, and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fluid leakages and component faults are identified and reported according to workplace procedures as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Carry out servicing activities

  1. Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
  2. Post-service testing is carried out according to workplace procedures
Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Post-service testing is carried out according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work is to workplace expectations and vehicle or machinery is presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  3. Tools and equipment are checked and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work is to workplace expectations and vehicle or machinery is presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare to conduct servicing operations

  1. Job requirements are determined from workplace instructions
  2. Servicing procedures and information are sourced and interpreted
  3. Hazards associated with the work are identified and risks are managed
  4. Tools, equipment and materials are selected and checked for serviceability
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Servicing procedures and information are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment and materials are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify lubricants and fluid leakage

  1. Suitable lubricants and fluids are identified according to manufacturer specifications and workplace procedures
  2. Lubricants and fluids are handled according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  3. Fluid leakages and component faults are identified and reported according to workplace procedures as required
Suitable lubricants and fluids are identified according to manufacturer specifications and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Lubricants and fluids are handled according to manufacturer specifications, workplace procedures, and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fluid leakages and component faults are identified and reported according to workplace procedures as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Carry out servicing activities

  1. Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
  2. Post-service testing is carried out according to workplace procedures
Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Post-service testing is carried out according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work is to workplace expectations and vehicle or machinery is presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  3. Tools and equipment are checked and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work is to workplace expectations and vehicle or machinery is presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to conduct servicing operations

1.1 Job requirements are determined from workplace instructions

1.2 Servicing procedures and information are sourced and interpreted

1.3 Hazards associated with the work are identified and risks are managed

1.4 Tools, equipment and materials are selected and checked for serviceability

2. Identify lubricants and fluid leakage

2.1 Suitable lubricants and fluids are identified according to manufacturer specifications and workplace procedures

2.2 Lubricants and fluids are handled according to manufacturer specifications, workplace procedures, and safety and environmental requirements

2.3 Fluid leakages and component faults are identified and reported according to workplace procedures as required

3. Carry out servicing activities

3.1 Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems

3.2 Post-service testing is carried out according to workplace procedures

4 Complete work processes

4.1 Final inspection is made to ensure work is to workplace expectations and vehicle or machinery is presented ready for use

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

4.3 Tools and equipment are checked and stored according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

Required Skills and Knowledge

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to conduct servicing operations

1.1 Job requirements are determined from workplace instructions

1.2 Servicing procedures and information are sourced and interpreted

1.3 Hazards associated with the work are identified and risks are managed

1.4 Tools, equipment and materials are selected and checked for serviceability

2. Identify lubricants and fluid leakage

2.1 Suitable lubricants and fluids are identified according to manufacturer specifications and workplace procedures

2.2 Lubricants and fluids are handled according to manufacturer specifications, workplace procedures, and safety and environmental requirements

2.3 Fluid leakages and component faults are identified and reported according to workplace procedures as required

3. Carry out servicing activities

3.1 Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems

3.2 Post-service testing is carried out according to workplace procedures

4 Complete work processes

4.1 Final inspection is made to ensure work is to workplace expectations and vehicle or machinery is presented ready for use

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

4.3 Tools and equipment are checked and stored according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

carry out servicing operations on two different vehicles or machinery, in which the work must involve:

replacing engine oil and filters

completing service reports.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to servicing operations, including procedures for:

lifting and supporting vehicles and machinery

isolating and stabilising vehicles or machinery

safely handling hazardous oils, fluids and greases

environmental requirements , including procedures for trapping, storing and disposing of lubricants and fluids released during servicing operations

identification, function, service requirements and procedures for vehicle or machinery systems and components, including:

steering and suspension

driveline and final drive

braking

wheels and tyres

transmission

engine

battery and electrical

fuel

cooling

types and applications of filters, oils, fluids and greases, including:

additives

oil, fluid and grease classification

viscosity ratings

filter types

oil sampling procedures

post-service testing procedures, including resetting service interval indicators.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Safety and environmental requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

lifting and supporting vehicles and machinery

isolating and stabilising vehicles or machinery

safely handling hazardous oils, fluids and greases

environmental requirements, including procedures for trapping, storing and disposing of lubricants and fluids released during servicing operations.