NTISthis.com

Evidence Guide: AURTTA012 - Fabricate and install fluid power hose assemblies

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURTTA012 - Fabricate and install fluid power hose assemblies

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to fabricate fluid power hose assembly

  1. Job requirements are determined from workplace instructions
  2. Fluid power hose fabrication procedures and information are sourced and interpreted
  3. Options are analysed and selected
  4. Hazards associated with the work are identified and risks are managed
  5. Tools and equipment are selected and checked for serviceability
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fluid power hose fabrication procedures and information are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Options are analysed and selected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fabricate assembly

  1. Fluid power hose and fittings are identified and selected according to manufacturer specifications and workplace procedures
  2. Fluid power hose is fabricated according to relevant industry standards, manufacturer specifications, workplace procedures, and safety and environmental requirements
Fluid power hose and fittings are identified and selected according to manufacturer specifications and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fluid power hose is fabricated according to relevant industry standards, manufacturer specifications, workplace procedures, and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Install and test assembly

  1. Procedures and information for hose installation are sourced and interpreted
  2. Fluid power hose is installed and tested according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  3. Test results are documented and reported according to workplace procedures
Procedures and information for hose installation are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fluid power hose is installed and tested according to manufacturer specifications, workplace procedures, and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Test results are documented and reported according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work is to workplace expectations and machinery is presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  3. Tools and equipment are checked and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work is to workplace expectations and machinery is presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare to fabricate fluid power hose assembly

  1. Job requirements are determined from workplace instructions
  2. Fluid power hose fabrication procedures and information are sourced and interpreted
  3. Options are analysed and selected
  4. Hazards associated with the work are identified and risks are managed
  5. Tools and equipment are selected and checked for serviceability
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fluid power hose fabrication procedures and information are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Options are analysed and selected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fabricate assembly

  1. Fluid power hose and fittings are identified and selected according to manufacturer specifications and workplace procedures
  2. Fluid power hose is fabricated according to relevant industry standards, manufacturer specifications, workplace procedures, and safety and environmental requirements
Fluid power hose and fittings are identified and selected according to manufacturer specifications and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fluid power hose is fabricated according to relevant industry standards, manufacturer specifications, workplace procedures, and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Install and test assembly

  1. Procedures and information for hose installation are sourced and interpreted
  2. Fluid power hose is installed and tested according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  3. Test results are documented and reported according to workplace procedures
Procedures and information for hose installation are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fluid power hose is installed and tested according to manufacturer specifications, workplace procedures, and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Test results are documented and reported according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work is to workplace expectations and machinery is presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  3. Tools and equipment are checked and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work is to workplace expectations and machinery is presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to fabricate fluid power hose assembly

1.1 Job requirements are determined from workplace instructions

1.2 Fluid power hose fabrication procedures and information are sourced and interpreted

1.3 Options are analysed and selected

1.4 Hazards associated with the work are identified and risks are managed

1.5 Tools and equipment are selected and checked for serviceability

2. Fabricate assembly

2.1 Fluid power hose and fittings are identified and selected according to manufacturer specifications and workplace procedures

2.2 Fluid power hose is fabricated according to relevant industry standards, manufacturer specifications, workplace procedures, and safety and environmental requirements

3. Install and test assembly

3.1 Procedures and information for hose installation are sourced and interpreted

3.2 Fluid power hose is installed and tested according to manufacturer specifications, workplace procedures, and safety and environmental requirements

3.3 Test results are documented and reported according to workplace procedures

4. Complete work processes

4.1 Final inspection is made to ensure work is to workplace expectations and machinery is presented ready for use

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

4.3 Tools and equipment are checked and stored according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

Required Skills and Knowledge

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to fabricate fluid power hose assembly

1.1 Job requirements are determined from workplace instructions

1.2 Fluid power hose fabrication procedures and information are sourced and interpreted

1.3 Options are analysed and selected

1.4 Hazards associated with the work are identified and risks are managed

1.5 Tools and equipment are selected and checked for serviceability

2. Fabricate assembly

2.1 Fluid power hose and fittings are identified and selected according to manufacturer specifications and workplace procedures

2.2 Fluid power hose is fabricated according to relevant industry standards, manufacturer specifications, workplace procedures, and safety and environmental requirements

3. Install and test assembly

3.1 Procedures and information for hose installation are sourced and interpreted

3.2 Fluid power hose is installed and tested according to manufacturer specifications, workplace procedures, and safety and environmental requirements

3.3 Test results are documented and reported according to workplace procedures

4. Complete work processes

4.1 Final inspection is made to ensure work is to workplace expectations and machinery is presented ready for use

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

4.3 Tools and equipment are checked and stored according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

fabricate, test and install fluid power hose assemblies, using both field attachable and crimp fittings, on two of the following:

single wire braid hose

double wire braid hose

spiral wire hose.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to fabricating and installing fluid power hose assemblies, including procedures for:

working with fluids under pressure

working with stored pressure hazards

isolating and stabilising vehicle or machinery

environmental requirements, including procedures for trapping, storing and disposing of oil released from hydraulic hoses

requirements of industry standards for hydraulic hoses and connectors, including:

MDG 41 Guideline for Fluid Power System Safety at Mines

ISO 6805 Rubber hoses and hose assemblies for underground mining

SAE J517 Hydraulic Hose

application and purpose of hydraulic hoses, including:

hose sizes

hose working pressures

hydraulic hoses, including:

fabric braid

single wire braid hose

double wire braid hose

spiral wire hose, including multi-spiral wire hose

crimped and swaged hose fittings

field attachable hose fittings

couplers, connectors and fittings

fabrication procedures for fluid power hose assemblies

testing procedures for fluid power hose assemblies

installation procedures for fluid power hose assemblies, including routing of hydraulic hoses and pipes

post-repair testing procedures for fluid power hose assemblies, including visual and performance tests.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Safety and environmental requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

working with fluids under pressure

working with stored pressure hazards

isolating and stabilising vehicle or machinery

environmental requirements, including procedures for trapping, storing and disposing of oil released from hydraulic hoses.