NTISthis.com

Evidence Guide: AURTTA015 - Produce engineering drawings for vehicle components

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURTTA015 - Produce engineering drawings for vehicle components

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to produce engineering drawing

  1. Job requirements are determined from workplace instructions
  2. Vehicle component or item to be drawn is identified
  3. Information for proposed engineering drawing content is located and interpreted
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Vehicle component or item to be drawn is identified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Information for proposed engineering drawing content is located and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Produce engineering drawing

  1. Drawing instruments, equipment and materials are selected and prepared
  2. Required engineering drawing is produced to specifications and quality standards
  3. Engineering drawing is completed and checked for accuracy according to workplace procedures
Drawing instruments, equipment and materials are selected and prepared

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Required engineering drawing is produced to specifications and quality standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Engineering drawing is completed and checked for accuracy according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure drawing is to workplace expectations and ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  3. Tools and equipment are checked and stored according to workplace procedures
  4. Drawing and workplace documentation are processed according to workplace procedures
Final inspection is made to ensure drawing is to workplace expectations and ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Drawing and workplace documentation are processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare to produce engineering drawing

  1. Job requirements are determined from workplace instructions
  2. Vehicle component or item to be drawn is identified
  3. Information for proposed engineering drawing content is located and interpreted
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Vehicle component or item to be drawn is identified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Information for proposed engineering drawing content is located and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Produce engineering drawing

  1. Drawing instruments, equipment and materials are selected and prepared
  2. Required engineering drawing is produced to specifications and quality standards
  3. Engineering drawing is completed and checked for accuracy according to workplace procedures
Drawing instruments, equipment and materials are selected and prepared

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Required engineering drawing is produced to specifications and quality standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Engineering drawing is completed and checked for accuracy according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure drawing is to workplace expectations and ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  3. Tools and equipment are checked and stored according to workplace procedures
  4. Drawing and workplace documentation are processed according to workplace procedures
Final inspection is made to ensure drawing is to workplace expectations and ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Drawing and workplace documentation are processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to produce engineering drawing

1.1 Job requirements are determined from workplace instructions

1.2 Vehicle component or item to be drawn is identified

1.3 Information for proposed engineering drawing content is located and interpreted

2. Produce engineering drawing

2.1 Drawing instruments, equipment and materials are selected and prepared

2.2 Required engineering drawing is produced to specifications and quality standards

2.3 Engineering drawing is completed and checked for accuracy according to workplace procedures

3. Complete work processes

3.1 Final inspection is made to ensure drawing is to workplace expectations and ready for use

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

3.3 Tools and equipment are checked and stored according to workplace procedures

3.4 Drawing and workplace documentation are processed according to workplace procedures

Required Skills and Knowledge

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to produce engineering drawing

1.1 Job requirements are determined from workplace instructions

1.2 Vehicle component or item to be drawn is identified

1.3 Information for proposed engineering drawing content is located and interpreted

2. Produce engineering drawing

2.1 Drawing instruments, equipment and materials are selected and prepared

2.2 Required engineering drawing is produced to specifications and quality standards

2.3 Engineering drawing is completed and checked for accuracy according to workplace procedures

3. Complete work processes

3.1 Final inspection is made to ensure drawing is to workplace expectations and ready for use

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

3.3 Tools and equipment are checked and stored according to workplace procedures

3.4 Drawing and workplace documentation are processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

produce engineering drawings covering the manufacture or modification of three different vehicle components using hand and computer-aided drawing (CAD) equipment.

Individuals must be able to demonstrate knowledge of:

engineering drawing techniques and procedures, including:

hand drawing

computer-aided drawing

engineering drawing terminology, symbols, codes, legends and diagrammatic representations

quality standards for producing, maintaining and storing engineering drawings

procedures for recording, reporting and maintaining engineering plans, workplace records and information.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Drawing must include:

correct symbols and codes

legends and diagrammatic representations

dimensions, tolerances and material specifications.