NTISthis.com

Evidence Guide: AURTTC001 - Inspect and service cooling systems

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURTTC001 - Inspect and service cooling systems

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to inspect and service cooling system

  1. Job requirements are determined from workplace instructions
  2. Servicing information is sourced and interpreted
  3. Hazards associated with the work are identified and risks are managed
  4. Tools, equipment and materials are selected and checked for serviceability
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Servicing information is sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment and materials are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspect cooling system

  1. Inspection is carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  2. Inspection results are compared with manufacturer specifications
  3. Inspection findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments
Inspection is carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspection results are compared with manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspection findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Service cooling system

  1. Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
  2. Post-service testing is carried out according to workplace procedures
Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Post-service testing is carried out according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work is to workplace expectations and vehicle or equipment is presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  3. Tools and equipment are checked and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work is to workplace expectations and vehicle or equipment is presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare to inspect and service cooling system

  1. Job requirements are determined from workplace instructions
  2. Servicing information is sourced and interpreted
  3. Hazards associated with the work are identified and risks are managed
  4. Tools, equipment and materials are selected and checked for serviceability
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Servicing information is sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment and materials are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspect cooling system

  1. Inspection is carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  2. Inspection results are compared with manufacturer specifications
  3. Inspection findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments
Inspection is carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspection results are compared with manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspection findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Service cooling system

  1. Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
  2. Post-service testing is carried out according to workplace procedures
Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Post-service testing is carried out according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work is to workplace expectations and vehicle or equipment is presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  3. Tools and equipment are checked and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work is to workplace expectations and vehicle or equipment is presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to inspect and service cooling system

1.1 Job requirements are determined from workplace instructions

1.2 Servicing information is sourced and interpreted

1.3 Hazards associated with the work are identified and risks are managed

1.4 Tools, equipment and materials are selected and checked for serviceability

2. Inspect cooling system

2.1 Inspection is carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements

2.2 Inspection results are compared with manufacturer specifications

2.3 Inspection findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments

3. Service cooling system

3.1 Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems

3.2 Post-service testing is carried out according to workplace procedures

4. Complete work processes

4.1 Final inspection is made to ensure work is to workplace expectations and vehicle or equipment is presented ready for use

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

4.3 Tools and equipment are checked and stored according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

Required Skills and Knowledge

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to inspect and service cooling system

1.1 Job requirements are determined from workplace instructions

1.2 Servicing information is sourced and interpreted

1.3 Hazards associated with the work are identified and risks are managed

1.4 Tools, equipment and materials are selected and checked for serviceability

2. Inspect cooling system

2.1 Inspection is carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements

2.2 Inspection results are compared with manufacturer specifications

2.3 Inspection findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments

3. Service cooling system

3.1 Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems

3.2 Post-service testing is carried out according to workplace procedures

4. Complete work processes

4.1 Final inspection is made to ensure work is to workplace expectations and vehicle or equipment is presented ready for use

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

4.3 Tools and equipment are checked and stored according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

inspect and service the cooling systems of two different vehicles or machinery

undertake post-service testing of above systems, which must include:

pressure testing

testing and adjusting coolant additives.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to inspecting and servicing cooling systems, including procedures for working with:

hot pressurised cooling systems

rotating fans, belts and pulleys

coolant additives

environmental requirements, including procedures for trapping, storing and disposing of fluids released from cooling systems

identification, function and basic operation of liquid cooling system, including:

engine coolant additives

water pumps

filters

thermostats

mechanical, hydraulic and electric fans

radiators and radiator caps

heater core and heater valve

expansion tanks

heat exchangers

core plugs

hoses

drive belts

temperature sensors and gauges

keel cooling, heat exchanger, raw water cooling and sacrificial anodes

identification, function and basic operation of air cooling system, including:

cooling system controls, fans, fins and cowlings

types, quantities and applications of coolant additives, including coolant concentration

inspection procedures for cooling systems, including:

coolant concentration test

transient voltage test

cooling system components

cooling system pressure testing

service and adjustment procedures for cooling systems, including:

system cleaning

coolant replacement

cooling system bleeding

post-service testing procedures for cooling systems.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Safety and environmental requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for working with:

hot pressurised cooling systems

rotating fans, belts and pulleys

coolant additives

environmental requirements, including procedures for trapping, storing and disposing of fluids released from cooling systems.