NTISthis.com

Evidence Guide: AURTTD006 - Remove and replace vehicle front suspension springs

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURTTD006 - Remove and replace vehicle front suspension springs

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to remove and replace vehicle front suspension springs

  1. Safety requirements are sourced and interpreted
  2. Task instruction is interpreted and vehicle suspensionto be worked on is identified
  3. Manufacturer specifications and workplace procedures for removing and replacing suspension springs are sourced and interpreted
  4. Potential hazards and risks associated with task are identified and reported to workplace supervisor
  5. Tools and equipment required for suspension spring removal and replacement are identified according to manufacturer specifications
Safety requirements are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Task instruction is interpreted and vehicle suspensionto be worked on is identified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Manufacturer specifications and workplace procedures for removing and replacing suspension springs are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Potential hazards and risks associated with task are identified and reported to workplace supervisor

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment required for suspension spring removal and replacement are identified according to manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Remove and inspect front suspension springs

  1. Tools, equipment and materials are selected and checked prior to use according to manufacturer specifications and safety requirements
  2. Vehicle is prepared for suspension springs removal according to workplace procedures and safety requirements
  3. Front suspension springs are removed according to workplace procedures and safety requirements, and without causing damage to components, tools or equipment
  4. Front suspension spring components are arranged, identified and inspected according to manufacturer specifications
  5. Results of inspecting front suspension spring components are recorded
Tools, equipment and materials are selected and checked prior to use according to manufacturer specifications and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Vehicle is prepared for suspension springs removal according to workplace procedures and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Front suspension springs are removed according to workplace procedures and safety requirements, and without causing damage to components, tools or equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Front suspension spring components are arranged, identified and inspected according to manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Results of inspecting front suspension spring components are recorded

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Replace front suspension springs

  1. Front suspension components are prepared for assembly
  2. Front suspension is assembled according to workplace procedures, manufacturer specifications and safety requirements, and without causing damage to components, tools and equipment
  3. Vehicle ride height is checked according to manufacturer specifications
Front suspension components are prepared for assembly

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Front suspension is assembled according to workplace procedures, manufacturer specifications and safety requirements, and without causing damage to components, tools and equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Vehicle ride height is checked according to manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work meets task instruction and workplace standards, and vehicle is presented ready for use or storage according to workplace procedures
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures
  3. Tools and equipment are checked and stored according to workplace procedures, or tagged and reported where necessary
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work meets task instruction and workplace standards, and vehicle is presented ready for use or storage according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace procedures, or tagged and reported where necessary

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Prepare to remove and replace vehicle front suspension springs

1.1 Safety requirements are sourced and interpreted

1.2 Task instruction is interpreted and vehicle suspensionto be worked on is identified

1.3 Manufacturer specifications and workplace procedures for removing and replacing suspension springs are sourced and interpreted

1.4 Potential hazards and risks associated with task are identified and reported to workplace supervisor

1.5 Tools and equipment required for suspension spring removal and replacement are identified according to manufacturer specifications

2. Remove and inspect front suspension springs

2.1 Tools, equipment and materials are selected and checked prior to use according to manufacturer specifications and safety requirements

2.2 Vehicle is prepared for suspension springs removal according to workplace procedures and safety requirements

2.3 Front suspension springs are removed according to workplace procedures and safety requirements, and without causing damage to components, tools or equipment

2.4 Front suspension spring components are arranged, identified and inspected according to manufacturer specifications

2.5 Results of inspecting front suspension spring components are recorded

3. Replace front suspension springs

3.1 Front suspension components are prepared for assembly

3.2 Front suspension is assembled according to workplace procedures, manufacturer specifications and safety requirements, and without causing damage to components, tools and equipment

3.3 Vehicle ride height is checked according to manufacturer specifications

4. Complete work processes

4.1 Final inspection is made to ensure work meets task instruction and workplace standards, and vehicle is presented ready for use or storage according to workplace procedures

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures

4.3 Tools and equipment are checked and stored according to workplace procedures, or tagged and reported where necessary

4.4 Workplace documentation is processed according to workplace procedures

Required Skills and Knowledge

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Prepare to remove and replace vehicle front suspension springs

1.1 Safety requirements are sourced and interpreted

1.2 Task instruction is interpreted and vehicle suspensionto be worked on is identified

1.3 Manufacturer specifications and workplace procedures for removing and replacing suspension springs are sourced and interpreted

1.4 Potential hazards and risks associated with task are identified and reported to workplace supervisor

1.5 Tools and equipment required for suspension spring removal and replacement are identified according to manufacturer specifications

2. Remove and inspect front suspension springs

2.1 Tools, equipment and materials are selected and checked prior to use according to manufacturer specifications and safety requirements

2.2 Vehicle is prepared for suspension springs removal according to workplace procedures and safety requirements

2.3 Front suspension springs are removed according to workplace procedures and safety requirements, and without causing damage to components, tools or equipment

2.4 Front suspension spring components are arranged, identified and inspected according to manufacturer specifications

2.5 Results of inspecting front suspension spring components are recorded

3. Replace front suspension springs

3.1 Front suspension components are prepared for assembly

3.2 Front suspension is assembled according to workplace procedures, manufacturer specifications and safety requirements, and without causing damage to components, tools and equipment

3.3 Vehicle ride height is checked according to manufacturer specifications

4. Complete work processes

4.1 Final inspection is made to ensure work meets task instruction and workplace standards, and vehicle is presented ready for use or storage according to workplace procedures

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures

4.3 Tools and equipment are checked and stored according to workplace procedures, or tagged and reported where necessary

4.4 Workplace documentation is processed according to workplace procedures

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Safety requirements must include:

information about key aspects of work health and safety (WHS), occupational health and safety (OHS) and environmental requirements, including:

use of personal protective equipment, including safety glasses, ear protection and safety footwear

use of hand tools and lifting equipment.

Tools, equipment and materials must include:

automotive hand tools

lifting and supporting equipment

related special tools, including spring compressors.

Front suspension spring must include:

front suspension springs from one of the following:

passenger or light commercial vehicle

motor cycle

constructed vehicle.