NTISthis.com

Evidence Guide: AURTTJ001 - Balance wheels and tyres

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURTTJ001 - Balance wheels and tyres

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to balance wheels and tyres

  1. Job requirements are determined from workplace instructions
  2. Wheel balancing information is sourced and interpreted
  3. Hazards associated with the work are identified and risks are managed
  4. Tools, equipment and materials are selected and checked for serviceability
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Wheel balancing information is sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment and materials are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Conduct wheel and tyre pre-balance inspection

  1. Wheel and tyre pre-balance inspection is carried out according to manufacturer specifications, workplace procedures and safety requirements
  2. Inspection findings are reported according to workplace procedures, including recommendations for necessary repair or replacement
Wheel and tyre pre-balance inspection is carried out according to manufacturer specifications, workplace procedures and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspection findings are reported according to workplace procedures, including recommendations for necessary repair or replacement

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Carry out balancing procedures

  1. Wheel balancing machine is inspected and operated according to manufacturer specifications, workplace procedures and safety requirements
  2. Wheel is balanced according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to wheel or tyre
Wheel balancing machine is inspected and operated according to manufacturer specifications, workplace procedures and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Wheel is balanced according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to wheel or tyre

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work is to workplace expectations and vehicle or wheels are presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  3. Tools and equipment are checked and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work is to workplace expectations and vehicle or wheels are presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare to balance wheels and tyres

  1. Job requirements are determined from workplace instructions
  2. Wheel balancing information is sourced and interpreted
  3. Hazards associated with the work are identified and risks are managed
  4. Tools, equipment and materials are selected and checked for serviceability
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Wheel balancing information is sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment and materials are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Conduct wheel and tyre pre-balance inspection

  1. Wheel and tyre pre-balance inspection is carried out according to manufacturer specifications, workplace procedures and safety requirements
  2. Inspection findings are reported according to workplace procedures, including recommendations for necessary repair or replacement
Wheel and tyre pre-balance inspection is carried out according to manufacturer specifications, workplace procedures and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspection findings are reported according to workplace procedures, including recommendations for necessary repair or replacement

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Carry out balancing procedures

  1. Wheel balancing machine is inspected and operated according to manufacturer specifications, workplace procedures and safety requirements
  2. Wheel is balanced according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to wheel or tyre
Wheel balancing machine is inspected and operated according to manufacturer specifications, workplace procedures and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Wheel is balanced according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to wheel or tyre

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work is to workplace expectations and vehicle or wheels are presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  3. Tools and equipment are checked and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work is to workplace expectations and vehicle or wheels are presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to balance wheels and tyres

1.1 Job requirements are determined from workplace instructions

1.2 Wheel balancing information is sourced and interpreted

1.3 Hazards associated with the work are identified and risks are managed

1.4 Tools, equipment and materials are selected and checked for serviceability

2. Conduct wheel and tyre pre-balance inspection

2.1 Wheel and tyre pre-balance inspection is carried out according to manufacturer specifications, workplace procedures and safety requirements

2.2 Inspection findings are reported according to workplace procedures, including recommendations for necessary repair or replacement

3. Carry out balancing procedures

3.1 Wheel balancing machine is inspected and operated according to manufacturer specifications, workplace procedures and safety requirements

3.2 Wheel is balanced according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to wheel or tyre

4. Complete work processes

4.1 Final inspection is made to ensure work is to workplace expectations and vehicle or wheels are presented ready for use

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

4.3 Tools and equipment are checked and stored according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

Required Skills and Knowledge

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to balance wheels and tyres

1.1 Job requirements are determined from workplace instructions

1.2 Wheel balancing information is sourced and interpreted

1.3 Hazards associated with the work are identified and risks are managed

1.4 Tools, equipment and materials are selected and checked for serviceability

2. Conduct wheel and tyre pre-balance inspection

2.1 Wheel and tyre pre-balance inspection is carried out according to manufacturer specifications, workplace procedures and safety requirements

2.2 Inspection findings are reported according to workplace procedures, including recommendations for necessary repair or replacement

3. Carry out balancing procedures

3.1 Wheel balancing machine is inspected and operated according to manufacturer specifications, workplace procedures and safety requirements

3.2 Wheel is balanced according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to wheel or tyre

4. Complete work processes

4.1 Final inspection is made to ensure work is to workplace expectations and vehicle or wheels are presented ready for use

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

4.3 Tools and equipment are checked and stored according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

balance at least four different wheels and tyres, in which work must involve:

selecting appropriate methods and techniques to balance wheels and tyres

conducting wheel and tyre pre-balance inspection for damage and excessive run-out.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to balancing wheels and tyres, including procedures for:

lifting and supporting vehicles and wheels

working with balancing machines, including rotating components and flying objects

procedures for pre-balance inspection of wheels and tyres

application, purpose, function and operation of wheel balancing machinery, including:

off vehicle balancers

on vehicle balancers

operating principles of wheel balancing, including:

tyre and wheel run-out

static and dynamic balance

out of balance effects on wheels, including:

wheel hop or tramp

wheel shimmy

vibration

tread wear

types and applications of wheel weights.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Safety requirements mustinclude:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

lifting and supporting vehicles and wheels

working with balancing machines, including rotating components and flying objects.