NTISthis.com

Evidence Guide: AURTTJ003 - Remove and replace wheel and tyre assemblies

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURTTJ003 - Remove and replace wheel and tyre assemblies

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to remove and replace wheel and tyre assemblies

  1. Safety requirements are sourced and interpreted
  2. Task instruction is interpreted andvehicle wheel and tyre assemblies to be worked on are identified
  3. Manufacturer specifications and workplace procedures for removing and replacing wheel and tyre assembly are sourced and interpreted
  4. Potential hazards and risks associated with task are identified and reported to workplace supervisor
  5. Tools and equipment required for wheel and tyre assembly removal and replacement are identified according to manufacturer specifications
Safety requirements are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Task instruction is interpreted andvehicle wheel and tyre assemblies to be worked on are identified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Manufacturer specifications and workplace procedures for removing and replacing wheel and tyre assembly are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Potential hazards and risks associated with task are identified and reported to workplace supervisor

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment required for wheel and tyre assembly removal and replacement are identified according to manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Remove and inspect vehicle wheel and tyre assemblies

  1. Tools, equipment and materials are selected and checked prior to use according to manufacturer specifications and safety requirements
  2. Vehicle is prepared for wheel removal according toworkplace procedures and safety requirements
  3. Wheel and tyre assemblies are removed according to workplace procedures and manufacturer specifications, and without causing damage to components, tools or equipment
  4. Wheel and tyre assemblies are identified and inspected according to manufacturer specifications
  5. Wheel and tyre assembly inspection results are recorded
Tools, equipment and materials are selected and checked prior to use according to manufacturer specifications and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Vehicle is prepared for wheel removal according toworkplace procedures and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Wheel and tyre assemblies are removed according to workplace procedures and manufacturer specifications, and without causing damage to components, tools or equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Wheel and tyre assemblies are identified and inspected according to manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Wheel and tyre assembly inspection results are recorded

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Replace wheel and tyre assemblies

  1. Wheel and tyre assemblies are prepared for replacement
  2. Wheel and tyre assemblies are replaced according to workplace procedures, manufacturer specifications and safety requirements without causing damage to components, tools or equipment
  3. Wheel and tyre assembly on vehicle is checked for correct operation
Wheel and tyre assemblies are prepared for replacement

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Wheel and tyre assemblies are replaced according to workplace procedures, manufacturer specifications and safety requirements without causing damage to components, tools or equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Wheel and tyre assembly on vehicle is checked for correct operation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work meets task instruction and workplace standards, and vehicle wheels and tyres are presented ready for use or storage according to workplace procedures
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures
  3. Tools and equipment are checked and stored according to workplace procedures, or tagged and reported where necessary
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work meets task instruction and workplace standards, and vehicle wheels and tyres are presented ready for use or storage according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace procedures, or tagged and reported where necessary

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Prepare to remove and replace wheel and tyre assemblies

1.1 Safety requirements are sourced and interpreted

1.2 Task instruction is interpreted andvehicle wheel and tyre assemblies to be worked on are identified

1.3 Manufacturer specifications and workplace procedures for removing and replacing wheel and tyre assembly are sourced and interpreted

1.4 Potential hazards and risks associated with task are identified and reported to workplace supervisor

1.5 Tools and equipment required for wheel and tyre assembly removal and replacement are identified according to manufacturer specifications

2. Remove and inspect vehicle wheel and tyre assemblies

2.1 Tools, equipment and materials are selected and checked prior to use according to manufacturer specifications and safety requirements

2.2 Vehicle is prepared for wheel removal according toworkplace procedures and safety requirements

2.3 Wheel and tyre assemblies are removed according to workplace procedures and manufacturer specifications, and without causing damage to components, tools or equipment

2.4 Wheel and tyre assemblies are identified and inspected according to manufacturer specifications

2.5 Wheel and tyre assembly inspection results are recorded

3. Replace wheel and tyre assemblies

3.1 Wheel and tyre assemblies are prepared for replacement

3.2 Wheel and tyre assemblies are replaced according to workplace procedures, manufacturer specifications and safety requirements without causing damage to components, tools or equipment

3.3 Wheel and tyre assembly on vehicle is checked for correct operation

4. Complete work processes

4.1 Final inspection is made to ensure work meets task instruction and workplace standards, and vehicle wheels and tyres are presented ready for use or storage according to workplace procedures

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures

4.3 Tools and equipment are checked and stored according to workplace procedures, or tagged and reported where necessary

4.4 Workplace documentation is processed according to workplace procedures

Required Skills and Knowledge

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Prepare to remove and replace wheel and tyre assemblies

1.1 Safety requirements are sourced and interpreted

1.2 Task instruction is interpreted andvehicle wheel and tyre assemblies to be worked on are identified

1.3 Manufacturer specifications and workplace procedures for removing and replacing wheel and tyre assembly are sourced and interpreted

1.4 Potential hazards and risks associated with task are identified and reported to workplace supervisor

1.5 Tools and equipment required for wheel and tyre assembly removal and replacement are identified according to manufacturer specifications

2. Remove and inspect vehicle wheel and tyre assemblies

2.1 Tools, equipment and materials are selected and checked prior to use according to manufacturer specifications and safety requirements

2.2 Vehicle is prepared for wheel removal according toworkplace procedures and safety requirements

2.3 Wheel and tyre assemblies are removed according to workplace procedures and manufacturer specifications, and without causing damage to components, tools or equipment

2.4 Wheel and tyre assemblies are identified and inspected according to manufacturer specifications

2.5 Wheel and tyre assembly inspection results are recorded

3. Replace wheel and tyre assemblies

3.1 Wheel and tyre assemblies are prepared for replacement

3.2 Wheel and tyre assemblies are replaced according to workplace procedures, manufacturer specifications and safety requirements without causing damage to components, tools or equipment

3.3 Wheel and tyre assembly on vehicle is checked for correct operation

4. Complete work processes

4.1 Final inspection is made to ensure work meets task instruction and workplace standards, and vehicle wheels and tyres are presented ready for use or storage according to workplace procedures

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures

4.3 Tools and equipment are checked and stored according to workplace procedures, or tagged and reported where necessary

4.4 Workplace documentation is processed according to workplace procedures

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Safety requirementsmust include:

information about key aspects of work health and safety (WHS) and occupational health and safety (OHS) requirements, including:

use of personal protective equipment, including safety glasses, ear protection and safety footwear

use of hand tools and lifting and supporting equipment

application of procedures for handling wheel and tyre assemblies.

Tools and equipment must include:

automotive hand tools

vehicle lifting and supporting equipment, including wheel chocks.

Vehicles must include one or more of the following:

passenger motor vehicle

motor cycle

constructed vehicle.

Wheel and tyre assemblies must include:

one vehicle fitted with steel wheels

one vehicle fitted with alloy wheels.