NTISthis.com

Evidence Guide: AURTTK2001 - Use and maintain measuring equipment in an automotive workplace

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURTTK2001 - Use and maintain measuring equipment in an automotive workplace

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to undertake measurements

  1. Nature and scope of work requirements are identified and confirmed
  2. Workplace health and safety (WHS) requirements and appropriate precautions are identified and applied
  3. Procedures and instructions, including workshop manuals and specifications, are sourced and used to determine job requirements
  4. Measuring methods appropriate to the circumstances are selected and prepared according to workplace procedures
  5. Measuring equipment is sourced and prepared
  6. Warnings relating to working with precision tools and equipment are observed
Nature and scope of work requirements are identified and confirmed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace health and safety (WHS) requirements and appropriate precautions are identified and applied

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Procedures and instructions, including workshop manuals and specifications, are sourced and used to determine job requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Measuring methods appropriate to the circumstances are selected and prepared according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Measuring equipment is sourced and prepared

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Warnings relating to working with precision tools and equipment are observed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Conduct measurements and analyse results

  1. Measurement is conducted according to workplace procedures and equipment manufacturer specifications
  2. Measurement results are compared with manufacturer specifications to indicate compliance or non-compliance
  3. Measurements are documented and recommendations made
  4. Reports are processed according to workplace procedures
Measurement is conducted according to workplace procedures and equipment manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Measurement results are compared with manufacturer specifications to indicate compliance or non-compliance

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Measurements are documented and recommendations made

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Reports are processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Maintain measuring equipment

  1. Information required for equipment maintenance is accessed from manufacturer specifications and interpreted
  2. Measuring equipment is checked against manufacturer recommendations and recommended maintenance methods are confirmed to ensure safe and accurate operating condition
  3. Measuring equipment is maintained and stored according to manufacturer specifications
  4. Equipment checks are completed without causing damage to component or system
  5. Workplace documents are completed according to workplace procedures
Information required for equipment maintenance is accessed from manufacturer specifications and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Measuring equipment is checked against manufacturer recommendations and recommended maintenance methods are confirmed to ensure safe and accurate operating condition

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Measuring equipment is maintained and stored according to manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment checks are completed without causing damage to component or system

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documents are completed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

The evidence required to demonstrate competency in this unit must be relevant to workplace operations and satisfy all of the requirements of the performance criteria and required skills and knowledge.

A person who demonstrates competency in this unit must be able to:

observe safety procedures

communicate effectively with others involved in or affected by the work

select approved measurement methods and techniques

measure dimensions or variables using a range of measuring equipment

accurately interpret measurements

maintain measuring equipment.

Context of, and specific resources for assessment

Competency is to be assessed in the workplace or a simulated workplace environment that accurately reflects performance in a real workplace setting.

Assessment is to occur:

using standard workplace practices and procedures

following safety requirements

applying environmental constraints.

Assessment is to comply with relevant:

regulatory requirements

Australian standards

industry codes of practice.

The following resources should be made available:

material relevant to the use and maintenance of measuring equipment

equipment and tools appropriate to the use and maintenance of measuring equipment

specifications and work instructions.

Method of assessment

Assessment must satisfy the endorsed Assessment Guidelines of this Training Package.

Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with the application of required skills and knowledge.

Assessment methods must be by direct observation of tasks and include questioning on required skills and knowledge to ensure correct interpretation and application.

Competence in this unit may be assessed in conjunction with other units which together form part of a holistic work role.

Where applicable, reasonable adjustment must be made to work environments and training situations to accommodate the needs of diverse clients.

Assessment processes and techniques must be culturally sensitive and appropriate to the language, literacy and numeracy capacity of the candidate and the work being performed.

Required Skills and Knowledge

Required skills

analytical skills to identify and analyse technical information

communication skills to:

follow verbal and written instructions

communicate information relating to the correct and safe use of equipment

literacy skills to:

read and follow original equipment manufacturer (OEM) maintenance information and measuring equipment use

read and follow information on operating procedures and OEM repair guidelines

numeracy skills to read and interpret metric and non-metric systems of measurement

planning and organising skills to:

identify and minimise risk to operator and others

contribute to activities that implement and follow workplace procedures

problem-solving skills to:

recognise a workplace problem or a potential problem

refer problems outside area of responsibility to appropriate person

self-management skills to:

locate and identify appropriate measuring equipment

recognise limitations and seek timely advice

follow basic workplace documentation, such as operating procedures

technical skills to:

select measuring equipment appropriate to the task

use measuring equipment safely

maintain measuring equipment using appropriate techniques

calibrate or adjust measuring equipment

identify defects in measuring equipment and mark for repair

store measuring equipment according to manufacturer and workplace procedures

technology skills to:

use manual, electronic and digital measuring equipment

use workplace technology to assist with work practices

Required knowledge

WHS regulations, requirements, equipment and material, including personal safety requirements

common automotive measurement terminology

types of non-specialist measuring equipment and their applications

measurement procedures

measuring equipment maintenance procedures

work organisation and planning processes relating to using measuring equipment

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Workplace health and safety (WHS) requirements:

are those prescribed under legislation, regulations, codes of practice, and workplace policies and procedures

may include:

protective clothing and equipment

use of tools and equipment

handling of material

use of fire-fighting equipment

first aid equipment

hazard control, including control of hazardous materials and toxic substances.

Workplace procedures may include:

conducting operational risk assessments and treatments associated with vehicle movement

site-specific instructions

safe work procedures relating to the use and maintenance of measuring equipment

workplace policies and practices

instructions issued by authorised workplace or external persons

written and graphical instructions

signage

work schedules, plans and specifications

work bulletins or memos

diagrams or sketches

vehicle workshop manuals and information.

Measuring equipment may include:

internal and external micrometres

Vernier calipers

dial gauges

depth gauges

steel rulers

tape measures

squares

straight edges

dividers

protractors

feeler gauges

thermometers

pressure gauges.

Maintenance methods may include:

routine maintenance to tools and equipment as per schedules

calibrating or adjusting measuring equipment

minor repairs to tools and equipment

documenting or tagging equipment as faulty or out-of-service.

Workplace documents may include:

fault or defect reporting documents

out-of-service reports

job or organisation work specifications and requirements.