NTISthis.com

Evidence Guide: AURTTS001 - Fabricate exhaust systems and components

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURTTS001 - Fabricate exhaust systems and components

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to fabricate exhaust system component

  1. Job requirements are determined from workplace instructions
  2. Fabrication procedures and information are sourced and interpreted
  3. Fabrication options are analysed and those most appropriate to the circumstances are selected
  4. Hazards associated with the work are identified and risks are managed
  5. Appropriate tools and equipment are selected and checked for serviceability
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fabrication procedures and information are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fabrication options are analysed and those most appropriate to the circumstances are selected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Appropriate tools and equipment are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fabricate and test component

  1. Component material is selected and sourced according to job requirements
  2. Material is shaped, machined and welded as required using approved methods and equipment according to manufacturer specifications and safety requirements
  3. Component is measured to ensure compliance with specifications
  4. Component fabrication is completed according to manufacturer specifications and safety requirements, and without causing damage to any component or system
  5. Component is tested according to workplace procedures and job requirements
Component material is selected and sourced according to job requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Material is shaped, machined and welded as required using approved methods and equipment according to manufacturer specifications and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Component is measured to ensure compliance with specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Component fabrication is completed according to manufacturer specifications and safety requirements, and without causing damage to any component or system

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Component is tested according to workplace procedures and job requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work is to workplace expectations and component is presented ready for use or storage according to workplace procedures
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  3. Tools and equipment are checked and stored according to workplace expectations
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work is to workplace expectations and component is presented ready for use or storage according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace expectations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare to fabricate exhaust system component

  1. Job requirements are determined from workplace instructions
  2. Fabrication procedures and information are sourced and interpreted
  3. Fabrication options are analysed and those most appropriate to the circumstances are selected
  4. Hazards associated with the work are identified and risks are managed
  5. Appropriate tools and equipment are selected and checked for serviceability
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fabrication procedures and information are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fabrication options are analysed and those most appropriate to the circumstances are selected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Appropriate tools and equipment are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fabricate and test component

  1. Component material is selected and sourced according to job requirements
  2. Material is shaped, machined and welded as required using approved methods and equipment according to manufacturer specifications and safety requirements
  3. Component is measured to ensure compliance with specifications
  4. Component fabrication is completed according to manufacturer specifications and safety requirements, and without causing damage to any component or system
  5. Component is tested according to workplace procedures and job requirements
Component material is selected and sourced according to job requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Material is shaped, machined and welded as required using approved methods and equipment according to manufacturer specifications and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Component is measured to ensure compliance with specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Component fabrication is completed according to manufacturer specifications and safety requirements, and without causing damage to any component or system

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Component is tested according to workplace procedures and job requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work is to workplace expectations and component is presented ready for use or storage according to workplace procedures
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  3. Tools and equipment are checked and stored according to workplace expectations
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work is to workplace expectations and component is presented ready for use or storage according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace expectations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to fabricate exhaust system component

1.1 Job requirements are determined from workplace instructions

1.2 Fabrication procedures and information are sourced and interpreted

1.3 Fabrication options are analysed and those most appropriate to the circumstances are selected

1.4 Hazards associated with the work are identified and risks are managed

1.5 Appropriate tools and equipment are selected and checked for serviceability

2. Fabricate and test component

2.1 Component material is selected and sourced according to job requirements

2.2 Material is shaped, machined and welded as required using approved methods and equipment according to manufacturer specifications and safety requirements

2.3 Component is measured to ensure compliance with specifications

2.4 Component fabrication is completed according to manufacturer specifications and safety requirements, and without causing damage to any component or system

2.5 Component is tested according to workplace procedures and job requirements

3. Complete work processes

3.1 Final inspection is made to ensure work is to workplace expectations and component is presented ready for use or storage according to workplace procedures

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

3.3 Tools and equipment are checked and stored according to workplace expectations

3.4 Workplace documentation is processed according to workplace procedures

Required Skills and Knowledge

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to fabricate exhaust system component

1.1 Job requirements are determined from workplace instructions

1.2 Fabrication procedures and information are sourced and interpreted

1.3 Fabrication options are analysed and those most appropriate to the circumstances are selected

1.4 Hazards associated with the work are identified and risks are managed

1.5 Appropriate tools and equipment are selected and checked for serviceability

2. Fabricate and test component

2.1 Component material is selected and sourced according to job requirements

2.2 Material is shaped, machined and welded as required using approved methods and equipment according to manufacturer specifications and safety requirements

2.3 Component is measured to ensure compliance with specifications

2.4 Component fabrication is completed according to manufacturer specifications and safety requirements, and without causing damage to any component or system

2.5 Component is tested according to workplace procedures and job requirements

3. Complete work processes

3.1 Final inspection is made to ensure work is to workplace expectations and component is presented ready for use or storage according to workplace procedures

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

3.3 Tools and equipment are checked and stored according to workplace expectations

3.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

fabricate two different exhaust systems, in which the work must involve:

manufacturing flanges

pipe bending

joining components by welding.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to fabricating exhaust systems and components, including procedures for:

selecting and using personal protective equipment (PPE)

using tools and equipment

safely handling fabrication equipment

using welding equipment

controlling hazards, including abnormal noise and hazardous fumes

operating principles of exhaust systems, including scavenging and back pressure

application, purpose and operation of exhaust systems, including:

mufflers

extractor pipes

catalytic converters

diesel particulate filters

exhaust component fabrication, including:

pipe bending

flange manufacture

welding techniques

exhaust fabrication tools, including:

exhaust pipe benders

pipe cutters

formers

welding equipment

exhaust system and component testing procedures.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Safety requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

selecting and using personal protective equipment (PPE)

using tools and equipment

safely handling fabrication equipment

using welding equipment

controlling hazards, including abnormal noise and hazardous fumes.