The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for work
|
|
Work instructions are used to determine job requirements, including method and material type. Completed |
Evidence:
|
Job specifications are read and interpreted. Completed |
Evidence:
|
Occupational health and safety (OHS) requirements, including personal protection needs, are observed throughout the work. Completed |
Evidence:
|
Materials are selected and inspected for quality. Completed |
Evidence:
|
Hand, power tooling and safety equipment are identified and checked for operation. Completed |
Evidence:
|
Procedures are determined to minimise waste material. Completed |
Evidence:
|
Procedures are identified for maximising energy efficiency while completing the job. Completed |
Evidence:
|
Prepare vehicle surfaces for painting
|
|
Information is accessed and interpreted from manufacturer/component supplier specifications. Completed |
Evidence:
|
Surfaces adjacent to the surfaces to be painted are protected using approved methods and material. Completed |
Evidence:
|
Surfaces to be painted are cleaned of contaminants. Completed |
Evidence:
|
Components and ancillary fittings that can be affected by the painting process are protected and/or removed and stored securely. Completed |
Evidence:
|
Surfaces to be painted are prepared using approved methods, material and equipment. Completed |
Evidence:
|
Unrecorded damage to surfaces and ancillary equipment is noted and reported to persons. Completed |
Evidence:
|
Surface preparation activities are carried out according to industry regulations/guidelines, OHS requirements, legislation and enterprise procedures/policies. Completed |
Evidence:
|
Waste material is disposed of in accordance with statutory and enterprise requirements. Completed |
Evidence:
|
Apply primers
|
|
Components and ancillary fittings that can be affected by application processes are protected and/or removed and stored safely. Completed |
Evidence:
|
Primers/primer surfaces are applied using approved methods, materials and equipment. Completed |
Evidence:
|
Application activities are carried out according to industry regulations/guidelines, OHS legislation, and enterprise procedures/policies. Completed |
Evidence:
|
Work is completed without causing damage to any component or system. Completed |
Evidence:
|
Prepare primed surface for refinishing
|
|
Surfaces to be refinished are prepared using approved methods, materials and equipment. Completed |
Evidence:
|
Preparation activities are carried out according to industry regulations/guidelines, OHS legislation, and enterprise procedures/policies. Completed |
Evidence:
|
Work is completed without causing damage to any component or system. Completed |
Evidence:
|
Waste materials are disposed of in accordance with statutory and enterprise requirements. Completed |
Evidence:
|
Clean up work area and maintain equipment
|
|
Material that can be reused is collected and stored. Completed |
Evidence:
|
Waste and scrap is removed following workplace procedure. Completed |
Evidence:
|
Equipment and work area are cleaned and inspected for serviceable condition in accordance with workplace procedures. Completed |
Evidence:
|
Unserviceable equipment is tagged and faults identified in accordance with workplace procedures. Completed |
Evidence:
|
Operator maintenance is completed in accordance with manufacturer/component supplier specifications and worksite procedures. Completed |
Evidence:
|
Tooling is maintained in accordance with workplace procedures. Completed |
Evidence:
|