The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for work
|
|
Work instructions are used to determine job requirements, including method, material and equipment. Completed |
Evidence:
|
Job specifications are read and interpreted. Completed |
Evidence:
|
OHS requirements, including dust and fume collection, breathing apparatus, eye and ear personal protection needs are observed throughout the work. Completed |
Evidence:
|
Materials for use are selected. Completed |
Evidence:
|
Equipment and tooling are identified and checked for safe and effective operation. Completed |
Evidence:
|
Procedures are determined to minimise waste material. Completed |
Evidence:
|
Procedures are identified for maximising energy efficiency while completing the job. Completed |
Evidence:
|
Measure and cut tinting material/template
|
|
Information is accessed from manufacturer/component supplier specifications and interpreted. Completed |
Evidence:
|
Measurement, cutting and template production are performed according to accepted industry methods, materials and procedures. Completed |
Evidence:
|
Surfaces are measured, and materials and templates are cut without causing damage to component or system. Completed |
Evidence:
|
Workplace documentation is completed and dealt with relevant to measuring and cutting outcomes. Completed |
Evidence:
|
Measurement, cutting and template production are to be carried out according to industry regulations/guidelines, OH&S requirements, legislation and enterprise procedures/policies. Completed |
Evidence:
|
Prepare surfaces and apply window tinting material
|
|
Information required for surface preparation and tinting is accessed from manufacturer/component supplier specifications and interpreted. Completed |
Evidence:
|
Surface preparation is carried out using approved methods, materials and equipment, according to the specifications of the tinting material to be applied. Completed |
Evidence:
|
Window tinting material is applied according to manufacturer/component supplier specifications and tolerances. Completed |
Evidence:
|
Tinting applications are inspected and tested in accordance with authorised procedures prior to placing into service. Completed |
Evidence:
|
Work is completed without causing damage to component or system. Completed |
Evidence:
|
Surface preparations and tinting applications are carried out according to industry regulations/guidelines, OHS requirements, legislation and enterprise procedures/policies. Completed |
Evidence:
|
Workplace documentation is completed and dealt with relevant to the tinting outcomes. Completed |
Evidence:
|
Store window tinting material
|
|
Information relating to storage is accessed and interpreted from manufacturer/component supplier specifications. Completed |
Evidence:
|
Window tinting material is stored without causing damage to component or system. Completed |
Evidence:
|
Storage is carried out according to industry regulations/guidelines, OHS requirements, legislation and enterprise procedures/policies. Completed |
Evidence:
|
Workplace documentation is completed and dealt with relevant to material storage outcomes. Completed |
Evidence:
|
Clean up work area and maintain equipment
|
|
Material that can be reused is collected and stored. Completed |
Evidence:
|
Waste and scrap are removed following workplace and environmental procedures. Completed |
Evidence:
|
Equipment and work area are cleaned and inspected for serviceable condition in accordance with workplace procedures. Completed |
Evidence:
|
Unserviceable equipment is tagged and faults identified in accordance with workplace requirements. Completed |
Evidence:
|
Operator maintenance is completed in accordance with manufacturer/component supplier specifications and worksite procedures. Completed |
Evidence:
|
Tooling is maintained in accordance with workplace procedures. Completed |
Evidence:
|