The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for work
|
|
Work instructions are used to determine the job requirements, including method, materials and equipment. Completed |
Evidence:
|
Job specifications are read and interpreted. Completed |
Evidence:
|
OH&S requirements, including dust and fume collection, breathing apparatus, eye and ear personal protection needs are observed throughout the work. Completed |
Evidence:
|
Material for repair is selected. Completed |
Evidence:
|
Equipment and tooling are identified and checked for safe and effective operation. Completed |
Evidence:
|
Procedures are determined to minimise waste material. Completed |
Evidence:
|
Procedures are identified for maximising energy efficiency while completing the job. Completed |
Evidence:
|
Inspect to determine repairs
|
|
Information is accessed and interpreted from manufacturer/ component supplier specifications. Completed |
Evidence:
|
Written inspection report is prepared during inspection. Completed |
Evidence:
|
Inspection is completed without causing damage to any component or system. Completed |
Evidence:
|
Inspection activities are carried out according to industry regulations/guidelines, OH&S legislation, and enterprise procedures/policies. Completed |
Evidence:
|
Results of inspection are documented/processed in accordance with enterprise requirements. Completed |
Evidence:
|
Replace or repair chassis/frame and associated components
|
|
Information is accessed and interpreted from manufacturer/ component supplier specifications. Completed |
Evidence:
|
Repair and replacement of chassis/frame and associated components are carried out in accordance with vehicle manufacturer/component supplier specifications and tolerances relative to the vehicle. Completed |
Evidence:
|
Replacement and repairs to components are achieved without causing damage to any component or system. Completed |
Evidence:
|
Workplace documentation is completed and dealt with relevant to replacement or repair outcomes. Completed |
Evidence:
|
All repair activities are carried out according to industry regulations/guidelines, OH&S legislation, and enterprise procedures/policies. Completed |
Evidence:
|
Align chassis/frame components
|
|
Information is accessed and interpreted from manufacturer/ component supplier specifications. Completed |
Evidence:
|
Alignment of chassis/frame and associated components is carried out in accordance with vehicle manufacturer/ component supplier specifications and tolerances relative to the vehicle. Completed |
Evidence:
|
Alignment is achieved without causing damage to any component or system. Completed |
Evidence:
|
Workplace documentation is completed and dealt with relevant to chassis alignment outcomes. Completed |
Evidence:
|
All repair activities are carried out according to industry regulations/guidelines, OH&S legislation, and enterprise procedures/policies. Completed |
Evidence:
|
Clear up work area and maintain equipment
|
|
Material that can be reused is collected and stored. Completed |
Evidence:
|
Waste and scrap is removed following workplace and environmental procedure. Completed |
Evidence:
|
Equipment and work area are cleaned and inspected for serviceable condition in accordance with workplace procedures. Completed |
Evidence:
|
Unserviceable equipment is tagged and faults identified in accordance with workplace requirements. Completed |
Evidence:
|
Operator maintenance is completed in accordance with manufacturer/component supplier specifications and worksite procedures. Completed |
Evidence:
|
Tooling is maintained in accordance with workplace procedures. Completed |
Evidence:
|