NTISthis.com

Evidence Guide: AURVTG004 - Remove and install direct glazed windscreens

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURVTG004 - Remove and install direct glazed windscreens

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare for removal and installation of direct glazed windscreen

  1. Job requirements are determined from workplace instructions
  2. Removal and installation information is accessed and interpreted from windscreen and vehicle manufacturer specifications, workplace procedures, and safety data sheets (SDS) for primers, activators and adhesives
  3. Work is planned to minimise waste and use time efficiently
  4. Vehicle is inspected to ensure there is no prior damage and that all related accessories are operating correctly
  5. Materials and windscreen are selected according to windscreen and vehicle manufacturer specifications, and are inspected for quality
  6. Hazards associated with the work are identified and risks are managed
  7. Tools and equipment are selected and checked for serviceability
  8. Vehicle is protected and safely located according to workplace procedures
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Removal and installation information is accessed and interpreted from windscreen and vehicle manufacturer specifications, workplace procedures, and safety data sheets (SDS) for primers, activators and adhesives

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work is planned to minimise waste and use time efficiently

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Vehicle is inspected to ensure there is no prior damage and that all related accessories are operating correctly

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Materials and windscreen are selected according to windscreen and vehicle manufacturer specifications, and are inspected for quality

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Vehicle is protected and safely located according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Carry out removal and installation activities

  1. Windscreen is removed according to manufacturer specifications, and safety and environmental requirements, and without causing damage to vehicle or components
  2. Replacement windscreen is installed, bonded and finished according to manufacturer specifications and safety and environmental requirements
  3. Adhesive is cured according to adhesive manufacturer specifications and timelines, as required
Windscreen is removed according to manufacturer specifications, and safety and environmental requirements, and without causing damage to vehicle or components

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Replacement windscreen is installed, bonded and finished according to manufacturer specifications and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Adhesive is cured according to adhesive manufacturer specifications and timelines, as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare for removal and installation of direct glazed windscreen

  1. Job requirements are determined from workplace instructions
  2. Removal and installation information is accessed and interpreted from windscreen and vehicle manufacturer specifications, workplace procedures, and safety data sheets (SDS) for primers, activators and adhesives
  3. Work is planned to minimise waste and use time efficiently
  4. Vehicle is inspected to ensure there is no prior damage and that all related accessories are operating correctly
  5. Materials and windscreen are selected according to windscreen and vehicle manufacturer specifications, and are inspected for quality
  6. Hazards associated with the work are identified and risks are managed
  7. Tools and equipment are selected and checked for serviceability
  8. Vehicle is protected and safely located according to workplace procedures
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Removal and installation information is accessed and interpreted from windscreen and vehicle manufacturer specifications, workplace procedures, and safety data sheets (SDS) for primers, activators and adhesives

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work is planned to minimise waste and use time efficiently

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Vehicle is inspected to ensure there is no prior damage and that all related accessories are operating correctly

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Materials and windscreen are selected according to windscreen and vehicle manufacturer specifications, and are inspected for quality

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Vehicle is protected and safely located according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Carry out removal and installation activities

  1. Windscreen is removed according to manufacturer specifications, and safety and environmental requirements, and without causing damage to vehicle or components
  2. Replacement windscreen is installed, bonded and finished according to manufacturer specifications and safety and environmental requirements
  3. Adhesive is cured according to adhesive manufacturer specifications and timelines, as required
Windscreen is removed according to manufacturer specifications, and safety and environmental requirements, and without causing damage to vehicle or components

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Replacement windscreen is installed, bonded and finished according to manufacturer specifications and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Adhesive is cured according to adhesive manufacturer specifications and timelines, as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work meets workplace expectations, related accessories are operating correctly, customer is informed of time to wait before driving vehicle, and vehicle is presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  3. Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work meets workplace expectations, related accessories are operating correctly, customer is informed of time to wait before driving vehicle, and vehicle is presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare for removal and installation of direct glazed windscreen

1.1 Job requirements are determined from workplace instructions

1.2 Removal and installation information is accessed and interpreted from windscreen and vehicle manufacturer specifications, workplace procedures, and safety data sheets (SDS) for primers, activators and adhesives

1.3 Work is planned to minimise waste and use time efficiently

1.4 Vehicle is inspected to ensure there is no prior damage and that all related accessories are operating correctly

1.5 Materials and windscreen are selected according to windscreen and vehicle manufacturer specifications, and are inspected for quality

1.6 Hazards associated with the work are identified and risks are managed

1.7 Tools and equipment are selected and checked for serviceability

1.8 Vehicle is protected and safely located according to workplace procedures

2. Carry out removal and installation activities

2.1 Windscreen is removed according to manufacturer specifications, and safety and environmental requirements, and without causing damage to vehicle or components

2.2 Replacement windscreen is installed, bonded and finished according to manufacturer specifications and safety and environmental requirements

2.3 Adhesive is cured according to adhesive manufacturer specifications and timelines, as required

3.. Complete work processes

3.1 Final inspection is made to ensure work meets workplace expectations, related accessories are operating correctly, customer is informed of time to wait before driving vehicle, and vehicle is presented ready for use

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

3.4 Workplace documentation is processed according to workplace procedures

Required Skills and Knowledge

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare for removal and installation of direct glazed windscreen

1.1 Job requirements are determined from workplace instructions

1.2 Removal and installation information is accessed and interpreted from windscreen and vehicle manufacturer specifications, workplace procedures, and safety data sheets (SDS) for primers, activators and adhesives

1.3 Work is planned to minimise waste and use time efficiently

1.4 Vehicle is inspected to ensure there is no prior damage and that all related accessories are operating correctly

1.5 Materials and windscreen are selected according to windscreen and vehicle manufacturer specifications, and are inspected for quality

1.6 Hazards associated with the work are identified and risks are managed

1.7 Tools and equipment are selected and checked for serviceability

1.8 Vehicle is protected and safely located according to workplace procedures

2. Carry out removal and installation activities

2.1 Windscreen is removed according to manufacturer specifications, and safety and environmental requirements, and without causing damage to vehicle or components

2.2 Replacement windscreen is installed, bonded and finished according to manufacturer specifications and safety and environmental requirements

2.3 Adhesive is cured according to adhesive manufacturer specifications and timelines, as required

3.. Complete work processes

3.1 Final inspection is made to ensure work meets workplace expectations, related accessories are operating correctly, customer is informed of time to wait before driving vehicle, and vehicle is presented ready for use

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

3.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

remove and install direct glazed windscreens on three different vehicles.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to removing and installing direct glazed windscreens, including procedures for:

selecting and using personal protective equipment (PPE)

using tools and lifting equipment

using safety data sheets (SDS) for primers, activators and adhesives

material handling and storage

environmental requirements, including procedures for trapping, storing and disposing of waste materials and chemicals

location and content of windscreen, vehicle manufacturer, and specific workplace technical specifications

removal and installation methods and techniques for direct glazed windscreens, including:

type and use of windscreen specialist tools and equipment

windscreen handling techniques

adhesive methods

potential problems and consequences

procedures for protecting vehicle and components during windscreen removal and installation

procedures for final inspection of fitted direct glazed windscreens.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Materials must include:

direct glazing materials, including:

adhesives

activators

primers

cleaning agents.

Tools and equipment mustinclude:

personal protective equipment (PPE)

specialist tools for removing direct glazed windscreens

lifting assistance tools to help install windscreens.

Safety and environmental requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

selecting and using PPE

using tools and lifting equipment

using SDS for primers, activators and adhesives

material handling and storage

environmental requirements, including procedures for trapping, storing and disposing of waste materials and chemicals.