NTISthis.com

Evidence Guide: AURVTG008 - Cut and process vehicle and machinery flat laminated glass

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURVTG008 - Cut and process vehicle and machinery flat laminated glass

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to cut and process flat laminated glass

  1. Job requirements are determined from workplace instructions
  2. Information is accessed and interpreted from laminated glass supplier specifications
  3. Laminated glass is sourced according to work order and job specifications and checked for quality
  4. Hazards associated with the work are identified and risks are managed
  5. Glass cutting equipment and personal protective equipment (PPE) are selected and checked for serviceability
  6. Work is planned to minimise off-cuts and use time efficiently
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Information is accessed and interpreted from laminated glass supplier specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Laminated glass is sourced according to work order and job specifications and checked for quality

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Glass cutting equipment and personal protective equipment (PPE) are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work is planned to minimise off-cuts and use time efficiently

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fabricate templates and patterns

  1. Accurate measurements are taken or checked to prepare templates and patterns
  2. Suitable materials and equipment are used to fabricate templates and patterns
  3. Template and pattern are marked out and fabricated according to workplace instructions, workplace procedures, and safety and environmental requirements
Accurate measurements are taken or checked to prepare templates and patterns

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Suitable materials and equipment are used to fabricate templates and patterns

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Template and pattern are marked out and fabricated according to workplace instructions, workplace procedures, and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Process glass

  1. Glass is measured, marked and cut out according to measurements, template and pattern, and safety and environmental requirements
  2. Glass cutting is completed according to workplace procedures, and safety and environmental requirements, and without causing damage to glass being cut
  3. Glass edges are arris or bevel edged according to workplace procedures, and safety and environmental requirements, and without causing damage to glass
Glass is measured, marked and cut out according to measurements, template and pattern, and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Glass cutting is completed according to workplace procedures, and safety and environmental requirements, and without causing damage to glass being cut

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Glass edges are arris or bevel edged according to workplace procedures, and safety and environmental requirements, and without causing damage to glass

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work meets workplace expectations
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  3. Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work meets workplace expectations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare to cut and process flat laminated glass

  1. Job requirements are determined from workplace instructions
  2. Information is accessed and interpreted from laminated glass supplier specifications
  3. Laminated glass is sourced according to work order and job specifications and checked for quality
  4. Hazards associated with the work are identified and risks are managed
  5. Glass cutting equipment and personal protective equipment (PPE) are selected and checked for serviceability
  6. Work is planned to minimise off-cuts and use time efficiently
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Information is accessed and interpreted from laminated glass supplier specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Laminated glass is sourced according to work order and job specifications and checked for quality

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Glass cutting equipment and personal protective equipment (PPE) are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work is planned to minimise off-cuts and use time efficiently

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fabricate templates and patterns

  1. Accurate measurements are taken or checked to prepare templates and patterns
  2. Suitable materials and equipment are used to fabricate templates and patterns
  3. Template and pattern are marked out and fabricated according to workplace instructions, workplace procedures, and safety and environmental requirements
Accurate measurements are taken or checked to prepare templates and patterns

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Suitable materials and equipment are used to fabricate templates and patterns

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Template and pattern are marked out and fabricated according to workplace instructions, workplace procedures, and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Process glass

  1. Glass is measured, marked and cut out according to measurements, template and pattern, and safety and environmental requirements
  2. Glass cutting is completed according to workplace procedures, and safety and environmental requirements, and without causing damage to glass being cut
  3. Glass edges are arris or bevel edged according to workplace procedures, and safety and environmental requirements, and without causing damage to glass
Glass is measured, marked and cut out according to measurements, template and pattern, and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Glass cutting is completed according to workplace procedures, and safety and environmental requirements, and without causing damage to glass being cut

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Glass edges are arris or bevel edged according to workplace procedures, and safety and environmental requirements, and without causing damage to glass

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work meets workplace expectations
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  3. Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work meets workplace expectations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to cut and process flat laminated glass

1.1 Job requirements are determined from workplace instructions

1.2 Information is accessed and interpreted from laminated glass supplier specifications

1.3 Laminated glass is sourced according to work order and job specifications and checked for quality

1.4 Hazards associated with the work are identified and risks are managed

1.5 Glass cutting equipment and personal protective equipment (PPE) are selected and checked for serviceability

1.6 Work is planned to minimise off-cuts and use time efficiently

2. Fabricate templates and patterns

2.1 Accurate measurements are taken or checked to prepare templates and patterns

2.2 Suitable materials and equipment are used to fabricate templates and patterns

2.3 Template and pattern are marked out and fabricated according to workplace instructions, workplace procedures, and safety and environmental requirements

3. Process glass

3.1 Glass is measured, marked and cut out according to measurements, template and pattern, and safety and environmental requirements

3.2 Glass cutting is completed according to workplace procedures, and safety and environmental requirements, and without causing damage to glass being cut

3.3 Glass edges are arris or bevel edged according to workplace procedures, and safety and environmental requirements, and without causing damage to glass

4. Complete work processes

4.1 Final inspection is made to ensure work meets workplace expectations

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

4.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

Required Skills and Knowledge

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to cut and process flat laminated glass

1.1 Job requirements are determined from workplace instructions

1.2 Information is accessed and interpreted from laminated glass supplier specifications

1.3 Laminated glass is sourced according to work order and job specifications and checked for quality

1.4 Hazards associated with the work are identified and risks are managed

1.5 Glass cutting equipment and personal protective equipment (PPE) are selected and checked for serviceability

1.6 Work is planned to minimise off-cuts and use time efficiently

2. Fabricate templates and patterns

2.1 Accurate measurements are taken or checked to prepare templates and patterns

2.2 Suitable materials and equipment are used to fabricate templates and patterns

2.3 Template and pattern are marked out and fabricated according to workplace instructions, workplace procedures, and safety and environmental requirements

3. Process glass

3.1 Glass is measured, marked and cut out according to measurements, template and pattern, and safety and environmental requirements

3.2 Glass cutting is completed according to workplace procedures, and safety and environmental requirements, and without causing damage to glass being cut

3.3 Glass edges are arris or bevel edged according to workplace procedures, and safety and environmental requirements, and without causing damage to glass

4. Complete work processes

4.1 Final inspection is made to ensure work meets workplace expectations

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

4.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

mark, cut, process and finish two different flat laminated glass sections, including:

one arris finish

one bevel edge.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to cutting and processing vehicle and machinery flat laminated glass, including procedures for:

selecting and using personal protective equipment (PPE)

using tools and equipment

using safety data sheets (SDS) for laminated glass

material handling and storage

environmental requirements, including procedures for trapping, storing and disposing of waste material

methods and procedures for cutting and processing flat laminated glass, including:

manufacturer technical information and specifications

template and pattern fabrication

different template materials

measuring and marking out procedures

glass handling and storage processes

glass cutting methods and techniques

use of glass cutting and arrising equipment

type and use of specialist tools and equipment

workplace glass cutting quality standards

cleaning materials and techniques

procedures for final inspection of cut flat laminated glass.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Glass cutting equipment mustinclude:

measuring equipment

glass templates and patterns

tools for grinding and polishing edges

hand and power tools.

Safety and environmental requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

selecting and using PPE

using tools and equipment

using safety data sheets (SDS) for laminated glass

material handling and storage

environmental requirements, including procedures for trapping, storing and disposing of waste material.