NTISthis.com

Evidence Guide: AURVTN011 - Remove and install vehicle rear vision mirrors

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURVTN011 - Remove and install vehicle rear vision mirrors

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to remove and install rear vision mirror

  1. Job requirements are determined from workplace instructions
  2. Manufacturer removal and installation information and adhesive safety data sheets (SDS) are sourced and interpreted
  3. Materials for rear vision mirror installation are selected and checked for quality and serviceability
  4. Hazards associated with the work are identified and risks are managed
  5. Tools and equipment are sourced and checked for serviceability
  6. Work is planned to identify methods, minimise waste, and prevent damage to vehicle
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Manufacturer removal and installation information and adhesive safety data sheets (SDS) are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Materials for rear vision mirror installation are selected and checked for quality and serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are sourced and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work is planned to identify methods, minimise waste, and prevent damage to vehicle

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Remove and install rear vision mirror

  1. Rear vision mirror is removed according to workplace procedures and safety and environmental requirements , and without causing damage to vehicle or components
  2. Glass surface is cleaned and prepared
  3. Adhesive is prepared and applied to surface for rear vision mirror installation
  4. Mirror is positioned accurately and installed using manufacturer-approved methods, materials and equipment
Rear vision mirror is removed according to workplace procedures and safety and environmental requirements , and without causing damage to vehicle or components

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Glass surface is cleaned and prepared

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Adhesive is prepared and applied to surface for rear vision mirror installation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Mirror is positioned accurately and installed using manufacturer-approved methods, materials and equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  3. Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare to remove and install rear vision mirror

  1. Job requirements are determined from workplace instructions
  2. Manufacturer removal and installation information and adhesive safety data sheets (SDS) are sourced and interpreted
  3. Materials for rear vision mirror installation are selected and checked for quality and serviceability
  4. Hazards associated with the work are identified and risks are managed
  5. Tools and equipment are sourced and checked for serviceability
  6. Work is planned to identify methods, minimise waste, and prevent damage to vehicle
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Manufacturer removal and installation information and adhesive safety data sheets (SDS) are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Materials for rear vision mirror installation are selected and checked for quality and serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are sourced and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work is planned to identify methods, minimise waste, and prevent damage to vehicle

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Remove and install rear vision mirror

  1. Rear vision mirror is removed according to workplace procedures and safety and environmental requirements , and without causing damage to vehicle or components
  2. Glass surface is cleaned and prepared
  3. Adhesive is prepared and applied to surface for rear vision mirror installation
  4. Mirror is positioned accurately and installed using manufacturer-approved methods, materials and equipment
Rear vision mirror is removed according to workplace procedures and safety and environmental requirements , and without causing damage to vehicle or components

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Glass surface is cleaned and prepared

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Adhesive is prepared and applied to surface for rear vision mirror installation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Mirror is positioned accurately and installed using manufacturer-approved methods, materials and equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  3. Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to remove and install rear vision mirror

1.1 Job requirements are determined from workplace instructions

1.2 Manufacturer removal and installation information and adhesive safety data sheets (SDS) are sourced and interpreted

1.3 Materials for rear vision mirror installation are selected and checked for quality and serviceability

1.4 Hazards associated with the work are identified and risks are managed

1.5 Tools and equipment are sourced and checked for serviceability

1.6 Work is planned to identify methods, minimise waste, and prevent damage to vehicle

2. Remove and install rear vision mirror

2.1 Rear vision mirror is removed according to workplace procedures and safety and environmental requirements , and without causing damage to vehicle or components

2.2 Glass surface is cleaned and prepared

2.3 Adhesive is prepared and applied to surface for rear vision mirror installation

2.4 Mirror is positioned accurately and installed using manufacturer-approved methods, materials and equipment

3. Complete work processes

3.1 Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

3.4 Workplace documentation is processed according to workplace procedures

Required Skills and Knowledge

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to remove and install rear vision mirror

1.1 Job requirements are determined from workplace instructions

1.2 Manufacturer removal and installation information and adhesive safety data sheets (SDS) are sourced and interpreted

1.3 Materials for rear vision mirror installation are selected and checked for quality and serviceability

1.4 Hazards associated with the work are identified and risks are managed

1.5 Tools and equipment are sourced and checked for serviceability

1.6 Work is planned to identify methods, minimise waste, and prevent damage to vehicle

2. Remove and install rear vision mirror

2.1 Rear vision mirror is removed according to workplace procedures and safety and environmental requirements , and without causing damage to vehicle or components

2.2 Glass surface is cleaned and prepared

2.3 Adhesive is prepared and applied to surface for rear vision mirror installation

2.4 Mirror is positioned accurately and installed using manufacturer-approved methods, materials and equipment

3. Complete work processes

3.1 Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

3.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

remove and install rear vision mirrors to three different vehicles.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to removing and installing vehicle rear vision mirrors, including procedures for:

selecting and using personal protective equipment (PPE)

using tools, equipment and adhesives

using safety data sheets (SDS) for adhesives

cleaning glass surfaces

environmental requirements, including procedures for trapping, storing and disposing of waste materials and adhesives

mirror removal and installation methods and techniques, including:

types and use of equipment and materials

glass and rear vision mirror surface cleaning

types of mirror adhesives and their application

correct placement and location of rear vision mirrors

procedures for protecting vehicle and components when removing and installing mirrors

procedures for final inspection of fitted rear vision mirrors.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Materials must include:

rear vision mirror

adhesives or adhesive system

cleaning products.

Safety and environmental requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

selecting and using personal protective equipment (PPE)

using tools, equipment and adhesives

using SDS for adhesives

cleaning glass surfaces

environmental requirements, including procedures for trapping, storing and disposing of waste materials and adhesives.