NTISthis.com

Evidence Guide: AURVTN039 - Set up body alignment equipment on vehicles

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURVTN039 - Set up body alignment equipment on vehicles

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to set up vehicle body alignment equipment

  1. Task instructions are interpreted and vehicle to be worked on is identified
  2. Manufacturer specifications and workplace procedures for aligning vehicle are sourced and interpreted
  3. Safety requirements are sourced and interpreted
  4. Potential hazards and risks associated with task are identified and reported to workplace supervisor
Task instructions are interpreted and vehicle to be worked on is identified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Manufacturer specifications and workplace procedures for aligning vehicle are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Safety requirements are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Potential hazards and risks associated with task are identified and reported to workplace supervisor

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Set up vehicle body alignment equipment

  1. Vehicle body is measured according to manufacturer specifications, workplace procedures and safety requirements
  2. Body alignment equipment and tools required for aligning body vehicle are identified and checked for serviceability
  3. Body alignment equipment is attached to vehicle according to manufacturer specifications, workplace procedures and safety requirements
Vehicle body is measured according to manufacturer specifications, workplace procedures and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Body alignment equipment and tools required for aligning body vehicle are identified and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Body alignment equipment is attached to vehicle according to manufacturer specifications, workplace procedures and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work meets task instruction and workplace standards, and vehicle is presented ready for use or further process according to workplace procedures
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures
  3. Tools and equipment are checked and stored according to workplace procedures, or tagged and reported as required
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work meets task instruction and workplace standards, and vehicle is presented ready for use or further process according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace procedures, or tagged and reported as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare to set up vehicle body alignment equipment

  1. Task instructions are interpreted and vehicle to be worked on is identified
  2. Manufacturer specifications and workplace procedures for aligning vehicle are sourced and interpreted
  3. Safety requirements are sourced and interpreted
  4. Potential hazards and risks associated with task are identified and reported to workplace supervisor
Task instructions are interpreted and vehicle to be worked on is identified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Manufacturer specifications and workplace procedures for aligning vehicle are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Safety requirements are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Potential hazards and risks associated with task are identified and reported to workplace supervisor

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Set up vehicle body alignment equipment

  1. Vehicle body is measured according to manufacturer specifications, workplace procedures and safety requirements
  2. Body alignment equipment and tools required for aligning body vehicle are identified and checked for serviceability
  3. Body alignment equipment is attached to vehicle according to manufacturer specifications, workplace procedures and safety requirements
Vehicle body is measured according to manufacturer specifications, workplace procedures and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Body alignment equipment and tools required for aligning body vehicle are identified and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Body alignment equipment is attached to vehicle according to manufacturer specifications, workplace procedures and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work meets task instruction and workplace standards, and vehicle is presented ready for use or further process according to workplace procedures
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures
  3. Tools and equipment are checked and stored according to workplace procedures, or tagged and reported as required
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work meets task instruction and workplace standards, and vehicle is presented ready for use or further process according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace procedures, or tagged and reported as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to set up vehicle body alignment equipment

1.1 Task instructions are interpreted and vehicle to be worked on is identified

1.2 Manufacturer specifications and workplace procedures for aligning vehicle are sourced and interpreted

1.3 Safety requirements are sourced and interpreted

1.4 Potential hazards and risks associated with task are identified and reported to workplace supervisor

2. Set up vehicle body alignment equipment

2.1 Vehicle body is measured according to manufacturer specifications, workplace procedures and safety requirements

2.2 Body alignment equipment and tools required for aligning body vehicle are identified and checked for serviceability

2.3 Body alignment equipment is attached to vehicle according to manufacturer specifications, workplace procedures and safety requirements

3. Complete work processes

3.1 Final inspection is made to ensure work meets task instruction and workplace standards, and vehicle is presented ready for use or further process according to workplace procedures

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures

3.3 Tools and equipment are checked and stored according to workplace procedures, or tagged and reported as required

3.4 Workplace documentation is processed according to workplace procedures

Required Skills and Knowledge

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to set up vehicle body alignment equipment

1.1 Task instructions are interpreted and vehicle to be worked on is identified

1.2 Manufacturer specifications and workplace procedures for aligning vehicle are sourced and interpreted

1.3 Safety requirements are sourced and interpreted

1.4 Potential hazards and risks associated with task are identified and reported to workplace supervisor

2. Set up vehicle body alignment equipment

2.1 Vehicle body is measured according to manufacturer specifications, workplace procedures and safety requirements

2.2 Body alignment equipment and tools required for aligning body vehicle are identified and checked for serviceability

2.3 Body alignment equipment is attached to vehicle according to manufacturer specifications, workplace procedures and safety requirements

3. Complete work processes

3.1 Final inspection is made to ensure work meets task instruction and workplace standards, and vehicle is presented ready for use or further process according to workplace procedures

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures

3.3 Tools and equipment are checked and stored according to workplace procedures, or tagged and reported as required

3.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

correctly set up body alignment equipment on one vehicle.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to setting up body alignment equipment on vehicles, including procedures for:

selecting and using personal protective equipment (PPE), including safety glasses, ear protection and safety footwear

using hand tools

types and construction of vehicle bodies

types and application of vehicle body alignment equipment.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Safety requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

selecting and using personal protective equipment (PPE), including safety glasses, ear protection and safety footwear

using hand tools.