NTISthis.com

Evidence Guide: AURVTN041 - Remove and realign vehicle body panels

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURVTN041 - Remove and realign vehicle body panels

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to remove and realign body panel

  1. Task instructions are interpreted and vehicle body panel to be worked on is identified
  2. Manufacturer specifications and workplace procedures for removing and aligning body panel are sourced and interpreted
  3. Safety requirements are sourced and interpreted
  4. Potential hazards and risks associated with task are identified and reported to workplace supervisor
  5. Tools and equipment required for removing and aligning body panel are identified and checked for serviceability
Task instructions are interpreted and vehicle body panel to be worked on is identified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Manufacturer specifications and workplace procedures for removing and aligning body panel are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Safety requirements are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Potential hazards and risks associated with task are identified and reported to workplace supervisor

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment required for removing and aligning body panel are identified and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Remove body panel

  1. Body panel is removed according toworkplace procedures and safety requirements, and without causing damage to components, tools or equipment
  2. Body panel is dismantled according toworkplace procedures and safety requirements
  3. Body panel is inspected according to manufacturer specifications
  4. Body panel inspection results are recorded
Body panel is removed according toworkplace procedures and safety requirements, and without causing damage to components, tools or equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Body panel is dismantled according toworkplace procedures and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Body panel is inspected according to manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Body panel inspection results are recorded

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Replace and realign body panel

  1. Body panel is reassembled according tomanufacturer specifications, workplace procedures and safety requirements
  2. Body panel is refitted to vehicle according tomanufacturer specifications, workplace procedures and safety requirements, and without causing damage to components, tools or equipment
  3. Body panel is adjusted and aligned to vehicle according tomanufacturer specifications, workplace procedures and safety requirements
  4. Body panel is inspected to ensure its correct alignment to vehicle
  5. Alignment inspection results are recorded
Body panel is reassembled according tomanufacturer specifications, workplace procedures and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Body panel is refitted to vehicle according tomanufacturer specifications, workplace procedures and safety requirements, and without causing damage to components, tools or equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Body panel is adjusted and aligned to vehicle according tomanufacturer specifications, workplace procedures and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Body panel is inspected to ensure its correct alignment to vehicle

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Alignment inspection results are recorded

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work meets task instructions and workplace standards, and vehicle is presented ready for use, further processes, or storage according to workplace procedures
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures
  3. Tools and equipment are checked and stored according to workplace procedures, or tagged and reported as required
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work meets task instructions and workplace standards, and vehicle is presented ready for use, further processes, or storage according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace procedures, or tagged and reported as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare to remove and realign body panel

  1. Task instructions are interpreted and vehicle body panel to be worked on is identified
  2. Manufacturer specifications and workplace procedures for removing and aligning body panel are sourced and interpreted
  3. Safety requirements are sourced and interpreted
  4. Potential hazards and risks associated with task are identified and reported to workplace supervisor
  5. Tools and equipment required for removing and aligning body panel are identified and checked for serviceability
Task instructions are interpreted and vehicle body panel to be worked on is identified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Manufacturer specifications and workplace procedures for removing and aligning body panel are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Safety requirements are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Potential hazards and risks associated with task are identified and reported to workplace supervisor

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment required for removing and aligning body panel are identified and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Remove body panel

  1. Body panel is removed according toworkplace procedures and safety requirements, and without causing damage to components, tools or equipment
  2. Body panel is dismantled according toworkplace procedures and safety requirements
  3. Body panel is inspected according to manufacturer specifications
  4. Body panel inspection results are recorded
Body panel is removed according toworkplace procedures and safety requirements, and without causing damage to components, tools or equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Body panel is dismantled according toworkplace procedures and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Body panel is inspected according to manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Body panel inspection results are recorded

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Replace and realign body panel

  1. Body panel is reassembled according tomanufacturer specifications, workplace procedures and safety requirements
  2. Body panel is refitted to vehicle according tomanufacturer specifications, workplace procedures and safety requirements, and without causing damage to components, tools or equipment
  3. Body panel is adjusted and aligned to vehicle according tomanufacturer specifications, workplace procedures and safety requirements
  4. Body panel is inspected to ensure its correct alignment to vehicle
  5. Alignment inspection results are recorded
Body panel is reassembled according tomanufacturer specifications, workplace procedures and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Body panel is refitted to vehicle according tomanufacturer specifications, workplace procedures and safety requirements, and without causing damage to components, tools or equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Body panel is adjusted and aligned to vehicle according tomanufacturer specifications, workplace procedures and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Body panel is inspected to ensure its correct alignment to vehicle

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Alignment inspection results are recorded

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work meets task instructions and workplace standards, and vehicle is presented ready for use, further processes, or storage according to workplace procedures
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures
  3. Tools and equipment are checked and stored according to workplace procedures, or tagged and reported as required
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work meets task instructions and workplace standards, and vehicle is presented ready for use, further processes, or storage according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace procedures, or tagged and reported as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to remove and realign body panel

1.1 Task instructions are interpreted and vehicle body panel to be worked on is identified

1.2 Manufacturer specifications and workplace procedures for removing and aligning body panel are sourced and interpreted

1.3 Safety requirements are sourced and interpreted

1.4 Potential hazards and risks associated with task are identified and reported to workplace supervisor

1.5 Tools and equipment required for removing and aligning body panel are identified and checked for serviceability

2. Remove body panel

2.1 Body panel is removed according toworkplace procedures and safety requirements, and without causing damage to components, tools or equipment

2.2 Body panel is dismantled according toworkplace procedures and safety requirements

2.3 Body panel is inspected according to manufacturer specifications

2.4 Body panel inspection results are recorded

3. Replace and realign body panel

3.1 Body panel is reassembled according tomanufacturer specifications, workplace procedures and safety requirements

3.2 Body panel is refitted to vehicle according tomanufacturer specifications, workplace procedures and safety requirements, and without causing damage to components, tools or equipment

3.3 Body panel is adjusted and aligned to vehicle according tomanufacturer specifications, workplace procedures and safety requirements

3.4 Body panel is inspected to ensure its correct alignment to vehicle

3.5 Alignment inspection results are recorded

4. Complete work processes

4.1 Final inspection is made to ensure work meets task instructions and workplace standards, and vehicle is presented ready for use, further processes, or storage according to workplace procedures

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures

4.3 Tools and equipment are checked and stored according to workplace procedures, or tagged and reported as required

4.4 Workplace documentation is processed according to workplace procedures

Required Skills and Knowledge

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to remove and realign body panel

1.1 Task instructions are interpreted and vehicle body panel to be worked on is identified

1.2 Manufacturer specifications and workplace procedures for removing and aligning body panel are sourced and interpreted

1.3 Safety requirements are sourced and interpreted

1.4 Potential hazards and risks associated with task are identified and reported to workplace supervisor

1.5 Tools and equipment required for removing and aligning body panel are identified and checked for serviceability

2. Remove body panel

2.1 Body panel is removed according toworkplace procedures and safety requirements, and without causing damage to components, tools or equipment

2.2 Body panel is dismantled according toworkplace procedures and safety requirements

2.3 Body panel is inspected according to manufacturer specifications

2.4 Body panel inspection results are recorded

3. Replace and realign body panel

3.1 Body panel is reassembled according tomanufacturer specifications, workplace procedures and safety requirements

3.2 Body panel is refitted to vehicle according tomanufacturer specifications, workplace procedures and safety requirements, and without causing damage to components, tools or equipment

3.3 Body panel is adjusted and aligned to vehicle according tomanufacturer specifications, workplace procedures and safety requirements

3.4 Body panel is inspected to ensure its correct alignment to vehicle

3.5 Alignment inspection results are recorded

4. Complete work processes

4.1 Final inspection is made to ensure work meets task instructions and workplace standards, and vehicle is presented ready for use, further processes, or storage according to workplace procedures

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures

4.3 Tools and equipment are checked and stored according to workplace procedures, or tagged and reported as required

4.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

remove and realign the following two different vehicle body panels:

one vehicle mud guard

one vehicle door.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to removing and realigning vehicle body panels, including procedures for:

selecting and using personal protective equipment (PPE), including safety glasses, ear protection and safety footwear

using hand tools

types and construction of vehicle body panels

body panel removal, dismantling, assembly and replacement procedures

body panel measurement and alignment procedures.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Safety requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

selecting and using personal protective equipment (PPE), including safety glasses, ear protection and safety footwear

using hand tools.