The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for work
|
|
Job requirements are determined from workplace instructions Completed |
Evidence:
|
Preparation information is accessed and interpreted Completed |
Evidence:
|
Vehicle or component is inspected to identify substrate paint film builds Completed |
Evidence:
|
Materials are selected and inspected for quality Completed |
Evidence:
|
Hazards associated with the work are identified and risks are managed Completed |
Evidence:
|
Refinishing tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability Completed |
Evidence:
|
Work is planned to identify vehicle substrate preparation methods, minimise waste, and prevent damage to vehicle Completed |
Evidence:
|
Remove surface rust and apply primers
|
|
Surface rust and scale are removed from substrate using approved methods, materials and equipment and according to workplace procedures and safety and environmental requirements Completed |
Evidence:
|
Substrate components affected by application processes are protected or removed without causing damage to vehicle or components Completed |
Evidence:
|
Surfaces to be painted are cleaned and contaminants are removed Completed |
Evidence:
|
Primers and primer surfaces are applied using approved methods, materials and equipment Completed |
Evidence:
|
Prepare primed and sealed surface for refinishing
|
|
Surfaces to be refinished are prepared using approved methods, materials and equipment to workplace quality requirements Completed |
Evidence:
|
Identified surface defects are recorded and reported Completed |
Evidence:
|
Complete work processes
|
|
Final inspection is made to ensure work meets workplace expectations and prepared surface is presented ready for refinishing Completed |
Evidence:
|
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored Completed |
Evidence:
|
Tools and equipment are checked, reported if faulty, and stored according to workplace procedures Completed |
Evidence:
|
Workplace documentation is processed according to workplace procedures Completed |
Evidence:
|
Prepare for work
|
|
Job requirements are determined from workplace instructions Completed |
Evidence:
|
Preparation information is accessed and interpreted Completed |
Evidence:
|
Vehicle or component is inspected to identify substrate paint film builds Completed |
Evidence:
|
Materials are selected and inspected for quality Completed |
Evidence:
|
Hazards associated with the work are identified and risks are managed Completed |
Evidence:
|
Refinishing tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability Completed |
Evidence:
|
Work is planned to identify vehicle substrate preparation methods, minimise waste, and prevent damage to vehicle Completed |
Evidence:
|
Remove surface rust and apply primers
|
|
Surface rust and scale are removed from substrate using approved methods, materials and equipment and according to workplace procedures and safety and environmental requirements Completed |
Evidence:
|
Substrate components affected by application processes are protected or removed without causing damage to vehicle or components Completed |
Evidence:
|
Surfaces to be painted are cleaned and contaminants are removed Completed |
Evidence:
|
Primers and primer surfaces are applied using approved methods, materials and equipment Completed |
Evidence:
|
Prepare primed and sealed surface for refinishing
|
|
Surfaces to be refinished are prepared using approved methods, materials and equipment to workplace quality requirements Completed |
Evidence:
|
Identified surface defects are recorded and reported Completed |
Evidence:
|
Complete work processes
|
|
Final inspection is made to ensure work meets workplace expectations and prepared surface is presented ready for refinishing Completed |
Evidence:
|
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored Completed |
Evidence:
|
Tools and equipment are checked, reported if faulty, and stored according to workplace procedures Completed |
Evidence:
|
Workplace documentation is processed according to workplace procedures Completed |
Evidence:
|