NTISthis.com

Evidence Guide: AURVTT002 - Carry out repairs and alterations to automotive and marine trim

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURVTT002 - Carry out repairs and alterations to automotive and marine trim

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to carry out trim repairs and alterations

  1. Job requirements are determined from workplace instructions
  2. Repair materials are selected and inspected for quality
  3. Hazards associated with the work are identified and risks are managed
  4. Trimming tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability
  5. Trim materials are matched, measured and cut according to job requirements
  6. Work area is prepared and work is planned to minimise waste and use time efficiently
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Repair materials are selected and inspected for quality

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Trimming tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Trim materials are matched, measured and cut according to job requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is prepared and work is planned to minimise waste and use time efficiently

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Repair and attach trim

  1. Repaired trim materials are pre-fitted and checked for alignment and appearance
  2. Repair and alteration of trim components are carried out according to manufacturer specifications, workplace procedures and customer requirements
  3. Tools and equipment are used according to workplace procedures and safety and environmental requirements
Repaired trim materials are pre-fitted and checked for alignment and appearance

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Repair and alteration of trim components are carried out according to manufacturer specifications, workplace procedures and customer requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are used according to workplace procedures and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work meets workplace expectations and repaired component is presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  3. Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work meets workplace expectations and repaired component is presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare to carry out trim repairs and alterations

  1. Job requirements are determined from workplace instructions
  2. Repair materials are selected and inspected for quality
  3. Hazards associated with the work are identified and risks are managed
  4. Trimming tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability
  5. Trim materials are matched, measured and cut according to job requirements
  6. Work area is prepared and work is planned to minimise waste and use time efficiently
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Repair materials are selected and inspected for quality

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Trimming tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Trim materials are matched, measured and cut according to job requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is prepared and work is planned to minimise waste and use time efficiently

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Repair and attach trim

  1. Repaired trim materials are pre-fitted and checked for alignment and appearance
  2. Repair and alteration of trim components are carried out according to manufacturer specifications, workplace procedures and customer requirements
  3. Tools and equipment are used according to workplace procedures and safety and environmental requirements
Repaired trim materials are pre-fitted and checked for alignment and appearance

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Repair and alteration of trim components are carried out according to manufacturer specifications, workplace procedures and customer requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are used according to workplace procedures and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work meets workplace expectations and repaired component is presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  3. Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work meets workplace expectations and repaired component is presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to carry out trim repairs and alterations

1.1 Job requirements are determined from workplace instructions

1.2 Repair materials are selected and inspected for quality

1.3 Hazards associated with the work are identified and risks are managed

1.4 Trimming tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability

1.5 Trim materials are matched, measured and cut according to job requirements

1.6 Work area is prepared and work is planned to minimise waste and use time efficiently

2. Repair and attach trim

2.1 Repaired trim materials are pre-fitted and checked for alignment and appearance

2.2 Repair and alteration of trim components are carried out according to manufacturer specifications, workplace procedures and customer requirements

2.3 Tools and equipment are used according to workplace procedures and safety and environmental requirements

3. Complete work processes

3.1 Final inspection is made to ensure work meets workplace expectations and repaired component is presented ready for use

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

3.4 Workplace documentation is processed according to workplace procedures

Required Skills and Knowledge

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to carry out trim repairs and alterations

1.1 Job requirements are determined from workplace instructions

1.2 Repair materials are selected and inspected for quality

1.3 Hazards associated with the work are identified and risks are managed

1.4 Trimming tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability

1.5 Trim materials are matched, measured and cut according to job requirements

1.6 Work area is prepared and work is planned to minimise waste and use time efficiently

2. Repair and attach trim

2.1 Repaired trim materials are pre-fitted and checked for alignment and appearance

2.2 Repair and alteration of trim components are carried out according to manufacturer specifications, workplace procedures and customer requirements

2.3 Tools and equipment are used according to workplace procedures and safety and environmental requirements

3. Complete work processes

3.1 Final inspection is made to ensure work meets workplace expectations and repaired component is presented ready for use

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

3.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

repair or alter three different automotive or marine covers and trim, in which the work must involve:

one repair

one alteration.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to carrying out repairs and alterations to automotive and marine trim, including procedures for:

selecting and using personal protective equipment (PPE)

using specialist tools and equipment

environmental requirements, including procedures for storing and disposing of waste materials

types and uses of trim material and trimming tools and equipment

trim repair and alteration techniques and procedures suitable for different types of trim materials, including:

detecting faults

trim measuring and cutting

trim removal and replacement

trim repair and alteration

procedures for final inspection of trim repair and alterations.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Tools and equipment must include:

sewing machines

specialist trimming hand tools and equipment.

Safety and environmental requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

selecting and using PPE

using specialist tools and equipment

environmental requirements, including procedures for storing and disposing of waste materials.