NTISthis.com

Evidence Guide: AURVTT003 - Remove and replace automotive and marine interior trim components

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURVTT003 - Remove and replace automotive and marine interior trim components

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to remove and replace interior trim component

  1. Job requirements are determined from workplace instructions
  2. Original equipment manufacturer (OEM) specifications and workplace procedures are accessed and interpreted
  3. Interior trim component to be removed and replaced is identified and inspected for damage
  4. Hazards associated with the work are identified and risks are managed
  5. Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
  6. Work is planned to minimise waste and use time efficiently
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Original equipment manufacturer (OEM) specifications and workplace procedures are accessed and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Interior trim component to be removed and replaced is identified and inspected for damage

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work is planned to minimise waste and use time efficiently

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Remove, store and replace trim

  1. Trim component is removed according to OEM specifications, workplace procedures, and safety and environmental requirements, and without causing damage to vehicle or other components
  2. Trim component is safely stored in preparation for replacement
  3. Trim component is replaced according to OEM specifications, workplace procedures, and safety and environmental requirements, and without causing damage to vehicle or other components
Trim component is removed according to OEM specifications, workplace procedures, and safety and environmental requirements, and without causing damage to vehicle or other components

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Trim component is safely stored in preparation for replacement

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Trim component is replaced according to OEM specifications, workplace procedures, and safety and environmental requirements, and without causing damage to vehicle or other components

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work meets workplace expectations and component is presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  3. Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work meets workplace expectations and component is presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare to remove and replace interior trim component

  1. Job requirements are determined from workplace instructions
  2. Original equipment manufacturer (OEM) specifications and workplace procedures are accessed and interpreted
  3. Interior trim component to be removed and replaced is identified and inspected for damage
  4. Hazards associated with the work are identified and risks are managed
  5. Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
  6. Work is planned to minimise waste and use time efficiently
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Original equipment manufacturer (OEM) specifications and workplace procedures are accessed and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Interior trim component to be removed and replaced is identified and inspected for damage

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work is planned to minimise waste and use time efficiently

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Remove, store and replace trim

  1. Trim component is removed according to OEM specifications, workplace procedures, and safety and environmental requirements, and without causing damage to vehicle or other components
  2. Trim component is safely stored in preparation for replacement
  3. Trim component is replaced according to OEM specifications, workplace procedures, and safety and environmental requirements, and without causing damage to vehicle or other components
Trim component is removed according to OEM specifications, workplace procedures, and safety and environmental requirements, and without causing damage to vehicle or other components

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Trim component is safely stored in preparation for replacement

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Trim component is replaced according to OEM specifications, workplace procedures, and safety and environmental requirements, and without causing damage to vehicle or other components

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work meets workplace expectations and component is presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  3. Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work meets workplace expectations and component is presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to remove and replace interior trim component

1.1 Job requirements are determined from workplace instructions

1.2 Original equipment manufacturer (OEM) specifications and workplace procedures are accessed and interpreted

1.3 Interior trim component to be removed and replaced is identified and inspected for damage

1.4 Hazards associated with the work are identified and risks are managed

1.5 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability

1.6 Work is planned to minimise waste and use time efficiently

2. Remove, store and replace trim

2.1 Trim component is removed according to OEM specifications, workplace procedures, and safety and environmental requirements, and without causing damage to vehicle or other components

2.2 Trim component is safely stored in preparation for replacement

2.3 Trim component is replaced according to OEM specifications, workplace procedures, and safety and environmental requirements, and without causing damage to vehicle or other components

3. Complete work processes

3.1 Final inspection is made to ensure work meets workplace expectations and component is presented ready for use

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

3.4 Workplace documentation is processed according to workplace procedures

Required Skills and Knowledge

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to remove and replace interior trim component

1.1 Job requirements are determined from workplace instructions

1.2 Original equipment manufacturer (OEM) specifications and workplace procedures are accessed and interpreted

1.3 Interior trim component to be removed and replaced is identified and inspected for damage

1.4 Hazards associated with the work are identified and risks are managed

1.5 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability

1.6 Work is planned to minimise waste and use time efficiently

2. Remove, store and replace trim

2.1 Trim component is removed according to OEM specifications, workplace procedures, and safety and environmental requirements, and without causing damage to vehicle or other components

2.2 Trim component is safely stored in preparation for replacement

2.3 Trim component is replaced according to OEM specifications, workplace procedures, and safety and environmental requirements, and without causing damage to vehicle or other components

3. Complete work processes

3.1 Final inspection is made to ensure work meets workplace expectations and component is presented ready for use

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

3.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

remove, store and replace trim components for three different vehicles or vessels, in which the work must involve:

door trims

carpets

head lining.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to removing and replacing automotive and marine interior trim components, including procedures for:

selecting and using personal protective equipment (PPE)

using specialist tools and equipment

manual handling components

environmental requirements, including procedures for storing and disposing of waste materials

original equipment manufacturer (OEM) specifications for removing and replacing automotive or marine interior trim components

types and uses of specialist tools and equipment needed to remove and replace interior trim components

trim component removal and replacement techniques and procedures, including procedures for protecting vehicle or vessel and components

procedures for final inspection of automotive or marine interior trim components.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Safety and environmental requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

selecting and using PPE

using specialist tools and equipment

manual handling components

environmental requirements, including procedures for storing and disposing of waste materials.