NTISthis.com

Evidence Guide: AURVTT006 - Apply trimming adhesives

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURVTT006 - Apply trimming adhesives

What evidence can you provide to prove your understanding of each of the following citeria?

PerformanceCriteria

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare to apply trim adhesives

  1. Job requirements are determined from workplace instructions
  2. Adhesive specifications, application processes, and relevant safety data sheets (SDS) are accessed and interpreted
  3. Hazards associated with the work are identified and risks are managed
  4. Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
  5. Work area is prepared and work is planned to minimise waste and use time efficiently
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Adhesive specifications, application processes, and relevant safety data sheets (SDS) are accessed and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is prepared and work is planned to minimise waste and use time efficiently

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare surfaces and apply adhesive

  1. Adhesive is selected according to manufacturer recommendation, trim and material type
  2. Surfaces are cleaned and prepared according to adhesive manufacturer specifications and SDS requirements
  3. Adhesive is applied to surfaces using adhesive application tools and equipment and according to workplace procedures and safety and environmental requirements
Adhesive is selected according to manufacturer recommendation, trim and material type

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Surfaces are cleaned and prepared according to adhesive manufacturer specifications and SDS requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Adhesive is applied to surfaces using adhesive application tools and equipment and according to workplace procedures and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final adhesive selection is made and presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  3. Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final adhesive selection is made and presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare to apply trim adhesives

  1. Job requirements are determined from workplace instructions
  2. Adhesive specifications, application processes, and relevant safety data sheets (SDS) are accessed and interpreted
  3. Hazards associated with the work are identified and risks are managed
  4. Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
  5. Work area is prepared and work is planned to minimise waste and use time efficiently
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Adhesive specifications, application processes, and relevant safety data sheets (SDS) are accessed and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is prepared and work is planned to minimise waste and use time efficiently

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare surfaces and apply adhesive

  1. Adhesive is selected according to manufacturer recommendation, trim and material type
  2. Surfaces are cleaned and prepared according to adhesive manufacturer specifications and SDS requirements
  3. Adhesive is applied to surfaces using adhesive application tools and equipment and according to workplace procedures and safety and environmental requirements
Adhesive is selected according to manufacturer recommendation, trim and material type

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Surfaces are cleaned and prepared according to adhesive manufacturer specifications and SDS requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Adhesive is applied to surfaces using adhesive application tools and equipment and according to workplace procedures and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final adhesive selection is made and presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  3. Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final adhesive selection is made and presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Elements describe the essential outcomes.

PerformanceCriteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to apply trim adhesives

1.1 Job requirements are determined from workplace instructions

1.2 Adhesive specifications, application processes, and relevant safety data sheets (SDS) are accessed and interpreted

1.3 Hazards associated with the work are identified and risks are managed

1.4 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability

1.5 Work area is prepared and work is planned to minimise waste and use time efficiently

2. Prepare surfaces and apply adhesive

2.1 Adhesive is selected according to manufacturer recommendation, trim and material type

2.2 Surfaces are cleaned and prepared according to adhesive manufacturer specifications and SDS requirements

2.3 Adhesive is applied to surfaces using adhesive application tools and equipment and according to workplace procedures and safety and environmental requirements

3. Complete work processes

3.1 Final adhesive selection is made and presented ready for use

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

3.4 Workplace documentation is processed according to workplace procedures

Required Skills and Knowledge

Elements

Elements describe the essential outcomes.

PerformanceCriteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to apply trim adhesives

1.1 Job requirements are determined from workplace instructions

1.2 Adhesive specifications, application processes, and relevant safety data sheets (SDS) are accessed and interpreted

1.3 Hazards associated with the work are identified and risks are managed

1.4 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability

1.5 Work area is prepared and work is planned to minimise waste and use time efficiently

2. Prepare surfaces and apply adhesive

2.1 Adhesive is selected according to manufacturer recommendation, trim and material type

2.2 Surfaces are cleaned and prepared according to adhesive manufacturer specifications and SDS requirements

2.3 Adhesive is applied to surfaces using adhesive application tools and equipment and according to workplace procedures and safety and environmental requirements

3. Complete work processes

3.1 Final adhesive selection is made and presented ready for use

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

3.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

apply trim adhesives to three different vehicle or vessel components, in which the work must involve:

one vehicle or marine fixed cover

one vehicle or marine carpet section.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to applying trimming adhesives, including procedures for:

selecting and using personal protective equipment (PPE)

using specialist tools and equipment

using safety data sheets (SDS) for adhesives

handling and storing adhesives

environmental requirements, including procedures for storing and disposing of waste adhesives

types and uses of specialist trimming tools and equipment

adhesive types required for different materials, including:

polyvinyl chloride (PVC)

fabric

leather

adhesive application techniques, including:

surface preparation

application

cleaning

procedures for protecting vehicle and components when applying trim adhesives.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Safety and environmental requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

selecting and using PPE

using specialist tools and equipment

using SDS for adhesives

handling and storing adhesives

environmental requirements, including procedures for storing and disposing of waste materials and adhesives.