NTISthis.com

Evidence Guide: AURVTT009 - Remove and replace vehicle and vessel seats and fittings

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURVTT009 - Remove and replace vehicle and vessel seats and fittings

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to remove and replace seats and fittings

  1. Job requirements are determined from workplace instructions
  2. Removal and replacement information is sourced and interpreted
  3. Hazards associated with the work are identified and risks are managed
  4. Hand tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability
  5. Work area and storage racks are prepared according to workplace procedures
  6. Work is planned to minimise waste and use time efficiently
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Removal and replacement information is sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hand tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area and storage racks are prepared according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work is planned to minimise waste and use time efficiently

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Remove and replace seats and fittings

  1. Seats and fittings are removed using manufacturer-approved methods, tools and equipment, according to safety and environmental requirements, and without causing damage to vehicle or components
  2. Seats and fittings are stored safely until needed for replacement
  3. Seats and fittings are replaced according to manufacturer replacement instructions and without causing damage to vehicle, ensuring all bolts and fasteners are used and tensioned
Seats and fittings are removed using manufacturer-approved methods, tools and equipment, according to safety and environmental requirements, and without causing damage to vehicle or components

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Seats and fittings are stored safely until needed for replacement

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Seats and fittings are replaced according to manufacturer replacement instructions and without causing damage to vehicle, ensuring all bolts and fasteners are used and tensioned

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
  2. Authorised personnel are informed of work outcome according to workplace procedures
  3. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  4. Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  5. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Authorised personnel are informed of work outcome according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare to remove and replace seats and fittings

  1. Job requirements are determined from workplace instructions
  2. Removal and replacement information is sourced and interpreted
  3. Hazards associated with the work are identified and risks are managed
  4. Hand tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability
  5. Work area and storage racks are prepared according to workplace procedures
  6. Work is planned to minimise waste and use time efficiently
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Removal and replacement information is sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hand tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area and storage racks are prepared according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work is planned to minimise waste and use time efficiently

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Remove and replace seats and fittings

  1. Seats and fittings are removed using manufacturer-approved methods, tools and equipment, according to safety and environmental requirements, and without causing damage to vehicle or components
  2. Seats and fittings are stored safely until needed for replacement
  3. Seats and fittings are replaced according to manufacturer replacement instructions and without causing damage to vehicle, ensuring all bolts and fasteners are used and tensioned
Seats and fittings are removed using manufacturer-approved methods, tools and equipment, according to safety and environmental requirements, and without causing damage to vehicle or components

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Seats and fittings are stored safely until needed for replacement

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Seats and fittings are replaced according to manufacturer replacement instructions and without causing damage to vehicle, ensuring all bolts and fasteners are used and tensioned

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
  2. Authorised personnel are informed of work outcome according to workplace procedures
  3. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  4. Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  5. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Authorised personnel are informed of work outcome according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to remove and replace seats and fittings

1.1 Job requirements are determined from workplace instructions

1.2 Removal and replacement information is sourced and interpreted

1.3 Hazards associated with the work are identified and risks are managed

1.4 Hand tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability

1.5 Work area and storage racks are prepared according to workplace procedures

1.6 Work is planned to minimise waste and use time efficiently

2. Remove and replace seats and fittings

2.1 Seats and fittings are removed using manufacturer-approved methods, tools and equipment, according to safety and environmental requirements, and without causing damage to vehicle or components

2.2 Seats and fittings are stored safely until needed for replacement

2.3 Seats and fittings are replaced according to manufacturer replacement instructions and without causing damage to vehicle, ensuring all bolts and fasteners are used and tensioned

3. Complete work processes

3.1 Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use

3.2 Authorised personnel are informed of work outcome according to workplace procedures

3.3 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

3.4 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

3.5 Workplace documentation is processed according to workplace procedures

Required Skills and Knowledge

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to remove and replace seats and fittings

1.1 Job requirements are determined from workplace instructions

1.2 Removal and replacement information is sourced and interpreted

1.3 Hazards associated with the work are identified and risks are managed

1.4 Hand tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability

1.5 Work area and storage racks are prepared according to workplace procedures

1.6 Work is planned to minimise waste and use time efficiently

2. Remove and replace seats and fittings

2.1 Seats and fittings are removed using manufacturer-approved methods, tools and equipment, according to safety and environmental requirements, and without causing damage to vehicle or components

2.2 Seats and fittings are stored safely until needed for replacement

2.3 Seats and fittings are replaced according to manufacturer replacement instructions and without causing damage to vehicle, ensuring all bolts and fasteners are used and tensioned

3. Complete work processes

3.1 Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use

3.2 Authorised personnel are informed of work outcome according to workplace procedures

3.3 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

3.4 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

3.5 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

remove and replace three different vehicle or vessel front and rear seats and fittings.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to removing and replacing vehicle and vessel seats and fittings, including procedures for:

selecting and using personal protective equipment (PPE)

using specialist tools and equipment

manual handling techniques

environmental requirements, including procedures for trapping, storing and disposing of waste materials

manufacturer instructions for removing and replacing seats and fittings, including:

electric seats

seat massage

heated seats

memory seats

types and use of workplace tools and equipment required for removing and replacing seats and fittings

vehicle and marine electric seat disconnection and reconnection procedures

procedures and requirements for safely storing seat and trim components

procedures for protecting vehicle and components when removing and replacing seats and fittings

procedures for final inspection and testing of replaced seats and fittings.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Safety and environmental requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

selecting and using PPE

using specialist tools and equipment

manual handling techniques

environmental requirements, including procedures for storing and disposing of waste materials.