NTISthis.com

Evidence Guide: AURVTT017 - Fabricate and install automotive and marine floor coverings

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURVTT017 - Fabricate and install automotive and marine floor coverings

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare for fabrication of floor coverings

  1. Job requirements are determined from workplace instructions
  2. Fabrication methods and materials are selected and inspected for quality and quantities are calculated
  3. Hazards associated with the work are identified and risks are managed
  4. Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
  5. Work is planned to minimise waste and use time efficiently
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fabrication methods and materials are selected and inspected for quality and quantities are calculated

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work is planned to minimise waste and use time efficiently

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Measure, fabricate and install floor coverings

  1. Work area is prepared and fabrication tools and equipment are set up for job requirement
  2. Materials are measured, marked out and cut according to floor covering specifications and patterns, workplace procedures, and safety and environmental requirements
  3. Floor coverings are fabricated and fabrication process is monitored to ensure specifications, customer requirements, and workplace procedures are met
  4. Defects, quality issues and non-conformances are reported to authorised personnel according to workplace procedures
  5. Installation and fitting of floor coverings, insulation and fastenings are completed according to workplace procedures and job requirements
Work area is prepared and fabrication tools and equipment are set up for job requirement

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Materials are measured, marked out and cut according to floor covering specifications and patterns, workplace procedures, and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Floor coverings are fabricated and fabrication process is monitored to ensure specifications, customer requirements, and workplace procedures are met

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Defects, quality issues and non-conformances are reported to authorised personnel according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Installation and fitting of floor coverings, insulation and fastenings are completed according to workplace procedures and job requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  3. Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare for fabrication of floor coverings

  1. Job requirements are determined from workplace instructions
  2. Fabrication methods and materials are selected and inspected for quality and quantities are calculated
  3. Hazards associated with the work are identified and risks are managed
  4. Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
  5. Work is planned to minimise waste and use time efficiently
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fabrication methods and materials are selected and inspected for quality and quantities are calculated

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work is planned to minimise waste and use time efficiently

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Measure, fabricate and install floor coverings

  1. Work area is prepared and fabrication tools and equipment are set up for job requirement
  2. Materials are measured, marked out and cut according to floor covering specifications and patterns, workplace procedures, and safety and environmental requirements
  3. Floor coverings are fabricated and fabrication process is monitored to ensure specifications, customer requirements, and workplace procedures are met
  4. Defects, quality issues and non-conformances are reported to authorised personnel according to workplace procedures
  5. Installation and fitting of floor coverings, insulation and fastenings are completed according to workplace procedures and job requirements
Work area is prepared and fabrication tools and equipment are set up for job requirement

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Materials are measured, marked out and cut according to floor covering specifications and patterns, workplace procedures, and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Floor coverings are fabricated and fabrication process is monitored to ensure specifications, customer requirements, and workplace procedures are met

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Defects, quality issues and non-conformances are reported to authorised personnel according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Installation and fitting of floor coverings, insulation and fastenings are completed according to workplace procedures and job requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  3. Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare for fabrication of floor coverings

1.1 Job requirements are determined from workplace instructions

1.2 Fabrication methods and materials are selected and inspected for quality and quantities are calculated

1.3 Hazards associated with the work are identified and risks are managed

1.4 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability

1.5 Work is planned to minimise waste and use time efficiently

2. Measure, fabricate and install floor coverings

2.1 Work area is prepared and fabrication tools and equipment are set up for job requirement

2.2 Materials are measured, marked out and cut according to floor covering specifications and patterns, workplace procedures, and safety and environmental requirements

2.3 Floor coverings are fabricated and fabrication process is monitored to ensure specifications, customer requirements, and workplace procedures are met

2.4 Defects, quality issues and non-conformances are reported to authorised personnel according to workplace procedures

2.5 Installation and fitting of floor coverings, insulation and fastenings are completed according to workplace procedures and job requirements

3. Complete work processes

3.1 Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

3.4 Workplace documentation is processed according to workplace procedures

Required Skills and Knowledge

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare for fabrication of floor coverings

1.1 Job requirements are determined from workplace instructions

1.2 Fabrication methods and materials are selected and inspected for quality and quantities are calculated

1.3 Hazards associated with the work are identified and risks are managed

1.4 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability

1.5 Work is planned to minimise waste and use time efficiently

2. Measure, fabricate and install floor coverings

2.1 Work area is prepared and fabrication tools and equipment are set up for job requirement

2.2 Materials are measured, marked out and cut according to floor covering specifications and patterns, workplace procedures, and safety and environmental requirements

2.3 Floor coverings are fabricated and fabrication process is monitored to ensure specifications, customer requirements, and workplace procedures are met

2.4 Defects, quality issues and non-conformances are reported to authorised personnel according to workplace procedures

2.5 Installation and fitting of floor coverings, insulation and fastenings are completed according to workplace procedures and job requirements

3. Complete work processes

3.1 Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

3.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

fabricate and install one complete automotive or marine floor covering to specification.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to fabricating and installing automotive or marine floor coverings, including procedures for:

selecting and using personal protective equipment (PPE)

using specialist tools and equipment

manually handling materials

environmental requirements, including procedures for storing and disposing of waste materials

type, use and basic maintenance of sewing and trimming tools and equipment

types of floor coverings and insulation and their application

methods and techniques for fabricating and installing floor coverings, including:

selecting materials

planning

measuring

marking out

cutting

sewing

using adhesives

fitting and fastening

procedures for protecting vehicle and components when installing floor coverings

procedures for final inspection of fabricated and installed floor coverings.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Fabrication methods mustinclude:

measuring

marking out

cutting

machine sewing

overlocking

fastening and fitting.

Materials must include:

heel mats

carpet

insulation.

Safety and environmental requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

selecting and using PPE

using specialist tools and equipment

manually handling materials

environmental requirements, including procedures for storing and disposing of waste materials.