NTISthis.com

Evidence Guide: AURVTT021 - Select and apply adhesives in automotive and marine service and repair work

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURVTT021 - Select and apply adhesives in automotive and marine service and repair work

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare for work

  1. Job requirements are determined from workplace instructions
  2. Adhesive information is accessed and interpreted
  3. Hazards associated with the work are identified and risks are managed
  4. Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
  5. Work area is prepared and work is planned to minimise waste and use time efficiently
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Adhesive information is accessed and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is prepared and work is planned to minimise waste and use time efficiently

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Select adhesive

  1. Appropriate adhesive for specific automotive materials is selected according to manufacturer specifications and workplace procedures
  2. Specific safety data sheet (SDS) information for selected adhesive is identified and followed
Appropriate adhesive for specific automotive materials is selected according to manufacturer specifications and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Specific safety data sheet (SDS) information for selected adhesive is identified and followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Apply adhesive to prepared surfaces

  1. Surfaces are cleaned and prepared according to adhesive manufacturer specifications
  2. Adhesives are applied according to workplace procedures and safety and environmental requirements, and without causing damage to system or components
Surfaces are cleaned and prepared according to adhesive manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Adhesives are applied according to workplace procedures and safety and environmental requirements, and without causing damage to system or components

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final adhesive selection is made and presented for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  3. Tools and equipment are checked and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final adhesive selection is made and presented for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare for work

  1. Job requirements are determined from workplace instructions
  2. Adhesive information is accessed and interpreted
  3. Hazards associated with the work are identified and risks are managed
  4. Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
  5. Work area is prepared and work is planned to minimise waste and use time efficiently
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Adhesive information is accessed and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is prepared and work is planned to minimise waste and use time efficiently

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Select adhesive

  1. Appropriate adhesive for specific automotive materials is selected according to manufacturer specifications and workplace procedures
  2. Specific safety data sheet (SDS) information for selected adhesive is identified and followed
Appropriate adhesive for specific automotive materials is selected according to manufacturer specifications and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Specific safety data sheet (SDS) information for selected adhesive is identified and followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Apply adhesive to prepared surfaces

  1. Surfaces are cleaned and prepared according to adhesive manufacturer specifications
  2. Adhesives are applied according to workplace procedures and safety and environmental requirements, and without causing damage to system or components
Surfaces are cleaned and prepared according to adhesive manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Adhesives are applied according to workplace procedures and safety and environmental requirements, and without causing damage to system or components

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final adhesive selection is made and presented for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  3. Tools and equipment are checked and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final adhesive selection is made and presented for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare for work

1.1 Job requirements are determined from workplace instructions

1.2 Adhesive information is accessed and interpreted

1.3 Hazards associated with the work are identified and risks are managed

1.4 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability

1.5 Work area is prepared and work is planned to minimise waste and use time efficiently

2. Select adhesive

2.1 Appropriate adhesive for specific automotive materials is selected according to manufacturer specifications and workplace procedures

2.2 Specific safety data sheet (SDS) information for selected adhesive is identified and followed

3. Apply adhesive to prepared surfaces

3.1 Surfaces are cleaned and prepared according to adhesive manufacturer specifications

3.2 Adhesives are applied according to workplace procedures and safety and environmental requirements, and without causing damage to system or components

4. Complete work processes

4.1 Final adhesive selection is made and presented for use

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

4.3 Tools and equipment are checked and stored according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

Required Skills and Knowledge

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare for work

1.1 Job requirements are determined from workplace instructions

1.2 Adhesive information is accessed and interpreted

1.3 Hazards associated with the work are identified and risks are managed

1.4 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability

1.5 Work area is prepared and work is planned to minimise waste and use time efficiently

2. Select adhesive

2.1 Appropriate adhesive for specific automotive materials is selected according to manufacturer specifications and workplace procedures

2.2 Specific safety data sheet (SDS) information for selected adhesive is identified and followed

3. Apply adhesive to prepared surfaces

3.1 Surfaces are cleaned and prepared according to adhesive manufacturer specifications

3.2 Adhesives are applied according to workplace procedures and safety and environmental requirements, and without causing damage to system or components

4. Complete work processes

4.1 Final adhesive selection is made and presented for use

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

4.3 Tools and equipment are checked and stored according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

select and apply adhesives to three different automotive or marine components, in which the work must involve one door trim.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to selecting and applying adhesives in automotive and marine service and repair work, including procedures for:

selecting and using PPE

using safety data sheets (SDS) for adhesives

using specialist tools and equipment

storing adhesives

environmental requirements, including procedures for trapping, storing and disposing of adhesives and waste materials

adhesive manufacturer specifications

adhesive types required for different automotive and marine materials

adhesive application techniques and procedures, including:

surface preparation

application

cleaning and disposal

procedures for protecting vehicle, vessel and components when applying adhesives

procedures for final inspection of applied adhesive.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Adhesive information must include:

adhesive-specific specifications

adhesive-specific application and removal instructions and processes

SDS information

manufacturer specifications.

Safety and environmental requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

selecting and using PPE

using SDS for adhesives

using specialist tools and equipment

storing adhesives

environmental requirements, including procedures for trapping, storing and disposing of adhesives and waste materials.