The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Climb RPA
|
|
Clarity of flight path is observed and risks mitigated in accordance with workplace procedures Completed |
Evidence:
|
RPA climb checks are completed according to workplace policies and procedures Completed |
Evidence:
|
Adjustments are made to attitude and power to achieve an increase of altitude at shallow, normal and steep rates and cruise conditions of flight during straight and turning manoeuvres as applicable Completed |
Evidence:
|
RPA is maintained in ‘trim’ condition as applicable Completed |
Evidence:
|
RPA is leveled off at or below 400’ AGL Completed |
Evidence:
|
Situational awareness, lookout and air traffic separation is maintained according to workplace procedures and regulatory requirements Completed |
Evidence:
|
Maintain straight and level flight
|
|
Power, altitude and configuration are set to achieve straight and level flight as applicable Completed |
Evidence:
|
RPA is maintained in ‘trim’ condition as applicable Completed |
Evidence:
|
Visible signs or electronic indications of height change are identified and responded to appropriately Completed |
Evidence:
|
Visible signs or electronic indications of heading change are identified and responded to appropriately Completed |
Evidence:
|
Clarity of flight path is observed and risks mitigated in accordance with workplace procedures Completed |
Evidence:
|
Situational awareness, lookout and air traffic separation is maintained according to workplace procedures and regulatory requirements Completed |
Evidence:
|
Turn RPA in flight
|
|
RPA operating limits are maintained during turns according to workplace procedures and manufacturer instructions Completed |
Evidence:
|
Situational awareness, lookout and air traffic separation is maintained during turns Completed |
Evidence:
|
Potential hazards are identified and controlled during turns Completed |
Evidence:
|
Control RPA speed in flight
|
|
Height awareness is maintained during slow speed flight Completed |
Evidence:
|
Recovery to cruise speed is achieved whilst maintaining height during flight Completed |
Evidence:
|
Descend RPA
|
|
Adjustments are made to altitude and power to achieve a decrease of altitude at shallow, normal and steep rates as applicable Completed |
Evidence:
|
RPA is maintained in ‘trim’ condition as applicable Completed |
Evidence:
|
RPA is leveled from a descent position at a nominated altitude according to workplace policies and procedures and manufacturer instructions Completed |
Evidence:
|
Clarity of flight path is observed during RPA descent and risks mitigated in accordance with workplace procedures Completed |
Evidence:
|
RPA operating limits are controlled during descent according to workplace procedures and manufacturer instructions Completed |
Evidence:
|
Descent checks are completed according to workplace procedures and regulatory requirements Completed |
Evidence:
|
Situational awareness, lookout and air traffic separation is maintained according to regulatory requirements and workplace procedures Completed |
Evidence:
|
Perform RPA landing approaches
|
|
Approaches are conducted in accordance with Operators Manual procedures appropriate to the RPA type with allowance for wind velocity Completed |
Evidence:
|
All mandated checklists are completed and communications procedures are followed Completed |
Evidence:
|
Traffic conflict or adverse flight conditions are recognised and a go-around/position - hold is performed from any position in the approach and landing pattern Completed |
Evidence:
|
Radio listening watch is maintained in accordance with established procedures and regulatory requirements Completed |
Evidence:
|
RPA is configured for landing according to workplace procedures and manufacturer instructions Completed |
Evidence:
|
Comply with airspace requirements
|
|
Compliance is maintained with air traffic requirements and controlled or restricted airspace conditions or limitations at all times Completed |
Evidence:
|
Safe progress of the flight is ensured at all times Completed |
Evidence:
|
Awareness of RPA position is maintained at all times Completed |
Evidence:
|
Radio listening watch is maintained in accordance with established procedures and regulatory requirements Completed |
Evidence:
|
Weather conditions are monitored and responded to appropriately according to regulatory requirements and workplace policies and procedures Completed |
Evidence:
|