NTISthis.com

Evidence Guide: CPCCBC4009B - Apply legal requirements to building and construction projects

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

CPCCBC4009B - Apply legal requirements to building and construction projects

What evidence can you provide to prove your understanding of each of the following citeria?

Apply the laws relating to builder licensing or registration.

  1. Licensing or registration legislation relevant to the region is researched and identified.
  2. Classifications for builders, supervisors and managers are applied.
Licensing or registration legislation relevant to the region is researched and identified.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Classifications for builders, supervisors and managers are applied.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Apply OHS legislation and provisions on site.

  1. Main provisions of OHS legislation and regulations are researched and identified and local legislative requirements are met.
  2. Regulations and codes applicable to on-site construction are identified, applied and monitored.
  3. Site safety signage requirements are identified and applied.
Main provisions of OHS legislation and regulations are researched and identified and local legislative requirements are met.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Regulations and codes applicable to on-site construction are identified, applied and monitored.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Site safety signage requirements are identified and applied.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Apply the codes, Acts, regulations and standards relevant to construction.

  1. Current codes, Acts, regulations and standards applicable to a particular building and construction project are researched.
  2. Construction process is carried out in accordance with codes, Acts, regulations and standards concerning construction, insurance, sustainability, environmental matters and appropriate by-laws.
Current codes, Acts, regulations and standards applicable to a particular building and construction project are researched.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Construction process is carried out in accordance with codes, Acts, regulations and standards concerning construction, insurance, sustainability, environmental matters and appropriate by-laws.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Comply with insurance and regulatory requirements for housing construction.

  1. Insurance cover is arranged in accordance with legal requirements.
  2. Contract law is applied in accordance with common law principles, relevant state or territory laws and regulations, and fair trading legislation.
Insurance cover is arranged in accordance with legal requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Contract law is applied in accordance with common law principles, relevant state or territory laws and regulations, and fair trading legislation.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Apply legislation to financial transactions.

  1. Payroll systems are set up and administered in compliance with current legislative requirements.
  2. GST systems are set up and administered in compliance with current legislation.
Payroll systems are set up and administered in compliance with current legislative requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

GST systems are set up and administered in compliance with current legislation.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Meet building contract obligations.

  1. Correct form of contract is selected for the project.
  2. Contracted work is carried out in accordance with the contractual obligations applicable to both parties.
  3. Conditions of the contract, including approvals and financial matters are met.
Correct form of contract is selected for the project.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Contracted work is carried out in accordance with the contractual obligations applicable to both parties.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Conditions of the contract, including approvals and financial matters are met.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Apply industrial relations policies and obligations relevant to housing construction.

  1. Relevant industrial relations policies and obligations are researched, identified and applied.
  2. Subcontract companies that comply with company policy and obligations under subcontract agreements are identified and contracted.
  3. Relevant awards are applied to contracts.
  4. Workplace agreements are used in accordance with company policy.
  5. Proactive measures are taken to ensure discrimination and harassment are not practised in the workplace.
  6. Provisions of training agreements are identified and applied.
  7. Reference material on access to industrial relations or legal information is made available to employees.
Relevant industrial relations policies and obligations are researched, identified and applied.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Subcontract companies that comply with company policy and obligations under subcontract agreements are identified and contracted.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Relevant awards are applied to contracts.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace agreements are used in accordance with company policy.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Proactive measures are taken to ensure discrimination and harassment are not practised in the workplace.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Provisions of training agreements are identified and applied.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Reference material on access to industrial relations or legal information is made available to employees.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Apply dispute resolution processes.

  1. Organisational dispute resolution processes are applied.
  2. Customer complaints are dealt with according to company policy.
  3. Disputes are documented and outcomes recorded and maintained.
Organisational dispute resolution processes are applied.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Customer complaints are dealt with according to company policy.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Disputes are documented and outcomes recorded and maintained.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

This unit of competency could be assessed by the preparation of a portfolio of the legislative requirements for one residential and one low rise commercial building and construction project case study. ('Low rise' licensing classification with reference to Class 1 and 10 construction and Classes 2 to 9 with a gross floor area not exceeding 2000 square metres, not including Type A or Type B construction).

The unit of competency can be assessed in the workplace or a close simulation of the workplace environment, provided that simulated or project-based assessment techniques fully replicate construction workplace conditions, materials, activities, responsibilities and procedures.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

A person who demonstrates competency in this unit must be able to provide evidence of the ability to:

understand appropriate registration, licensing or compliance requirements of state or territory registration authorities

meet appropriate business registration requirements

identify and specify appropriate insurance documentation, citing protection that meets local industry requirements

identify and specify requirements for compliance with:

OHS legislation

legislation pertaining to financial transactions, including payment of wages and subcontractor and supplier invoices

relevant building and construction codes, Acts, regulations and standards

sustainability and environmental legislation

industrial relations laws

legal obligations of contractual agreements.

Context of and specific resources for assessment

This competency is to be assessed using standard and authorised work practices, safety requirements and environmental constraints.

Assessment of essential underpinning knowledge will usually be conducted in an off-site context.

Assessment is to comply with relevant regulatory or Australian standards' requirements.

Resource implications for assessment include:

documentation that should normally be available in either a building or construction office

relevant codes, standards and government regulations

office equipment, including calculators, photocopiers and telephone systems

technical reference library with current publications on measurement, design, building construction and manufacturer's product literature

a suitable work area appropriate to the construction process.

Reasonable adjustments for people with disabilities must be made to assessment processes where required. This could include access to modified equipment and other physical resources, and the provision of appropriate assessment support.

Method of assessment

Assessment methods must:

satisfy the endorsed Assessment Guidelines of the Construction, Plumbing and Services Training Package

include direct observation of tasks in real or simulated work conditions, with questioning to confirm the ability to consistently identify and correctly interpret the essential underpinning knowledge required for practical application

reinforce the integration of employability skills with workplace tasks and job roles

confirm a reasonable inference that competency is not only verified under the particular assessment circumstance, but is able to be transferred to other circumstances and environments.

Validity and sufficiency of evidence requires that:

competency will need to be demonstrated over a period of time reflecting the scope of the role and practical requirements of the workplace

where the assessment is part of a structured learning experience the evidence collected must relate to a number of performances assessed at different points in time and separated by further learning and practice with a decision on competency only taken at the point when the assessor has complete confidence in the person's demonstrated ability and applied knowledge

all assessment that is part of a structured learning experience must include a combination of direct, indirect and supplementary evidence.

Assessment processes and techniques should, as far as is practical, take into account the language, literacy and numeracy capacity of the candidate in relation to the competency being assessed.

Supplementary evidence of competency may be obtained from relevant authenticated documentation from third parties, such as existing supervisors, team leaders or specialist training staff.

Required Skills and Knowledge

Required skills

Required skills for this unit are:

ability to research, access and interpret complex documents

communication skills to:

communicate with local or regulatory authorities on matters relating to site conditions or approvals and to negotiate on matters concerning industrial relations by telephone, or face to face

use language and concepts appropriate to cultural differences

use and interpret non-verbal communication

written skills to communicate by memo, letter, facsimile or email with subcontractors, staff, clients and regulatory authorities

interpersonal skills relevant to the supervision and monitoring of work processes

numeracy skills to apply calculations.

Required knowledge

Required knowledge for this unit is:

building and construction industry contracts

OHS frameworks and obligations under federal, state and territory legislation and regulation

organisational policies and procedures related to discrimination and harassment

reasonable understanding of federal, state or territory anti-discrimination and equal employment opportunity legislation

risk management processes and practices and the planning required to develop plans

state or territory building and construction codes, standards and government regulations

workplace safety requirements.

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Licensing or registration legislation includes state laws such as:

Builders Registration Act 1939 and the Home Building Contracts Act 1991 in Western Australia

Home Building Act and Regulations 1989 in New South Wales.

OHS legislation includes state laws such as:

Occupational Health and Safety Act 1983 in New South Wales

Occupational Health and Safety Act 1984 in Western Australia

Occupational Health and Safety Act 1985 in Victoria

Occupational Health and Safety Act 1986 in South Australia

WorkCover Queensland Act 1996.

Codes, Acts, regulations and standards include:

latest editions of:

AS1720 Timber structures

AS3600 Concrete structures

AS4100 Steel structures

relevant Australian building and construction standards

relevant state or territory fair trading Acts and regulations

relevant state, territory and local authority planning and other approval requirements

Timber Framing Code of Australia.

Insurance cover includes:

home owner's warranty

superannuation

workers' compensation.

Industrial relations policies and obligations include:

federal and state industrial instruments

federal and state industrial legislation.