The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for work.
|
|
Work instructions, including plans, specifications, quality requirements and operational details, are obtained, confirmed and applied from relevant information. Completed |
Evidence:
|
Safety (OHS) requirements are followed in accordance with safety plans and policies. Completed |
Evidence:
|
Signage and barricade requirements are identified and implemented. Completed |
Evidence:
|
Plant, tools and equipment selected to carry out tasks are consistent with job requirements, checked for serviceability, and any faults are rectified or reported prior to commencement. Completed |
Evidence:
|
Material quantity requirements are calculated in accordance with plans, specifications and quality requirements. Completed |
Evidence:
|
Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use. Completed |
Evidence:
|
Environmental requirements are identified for the project in accordance with environmental plans and statutory and regulatory authority obligations, and are applied. Completed |
Evidence:
|
Set out brickwork.
|
|
Work platform is erected in accordance with regulatory and workplace requirements. Completed |
Evidence:
|
Location and structural details of multi-thickness brickwork are determined from drawings and specifications. Completed |
Evidence:
|
Set out area is located and footing is checked for conformity to dimensions and location as per job drawings, specifications and standards. Completed |
Evidence:
|
Brickwork is set out to location according to dimensions from drawings and specifications. Completed |
Evidence:
|
Construct walls and attached piers.
|
|
Mortar is mixed and bricks are laid to set out for base and specified bond types in accordance with specifications and standards. Completed |
Evidence:
|
Multi-thickness wall is constructed maintaining bond, and is completed to job specifications and standards. Completed |
Evidence:
|
Attached piers are bonded to wall according to job specifications. Completed |
Evidence:
|
Walls are to be straight and true in plumb line and level within standard tolerances. Completed |
Evidence:
|
Damp proof courses are built to specifications and standards. Completed |
Evidence:
|
Openings are constructed and lintels are installed to job specifications and standards. Completed |
Evidence:
|
Tie down and lateral support systems for ceiling and roof structures are installed to walls in accordance with plans, specifications, codes and standards. Completed |
Evidence:
|
Construct isolated piers.
|
|
Bricks are laid to set out and specified bond. Completed |
Evidence:
|
Piers are constructed to application and requirements for line, level and plumb in construction projects, and bond is maintained to job specifications. Completed |
Evidence:
|
Finish joints.
|
|
Excess mortar is removed from brickwork surfaces and cavities are cleaned free of mortar and debris in accordance with manufacturer recommendations, job specifications, standards and codes. Completed |
Evidence:
|
Joints of laid brickwork are raked or ruled to correct profile and depth in accordance with job specifications. Completed |
Evidence:
|
Brickwork is brushed down prior to drying to remove unwanted mortar. Completed |
Evidence:
|
Clean up.
|
|
Work area is cleared and materials disposed of, reused or recycled in accordance with legislation, regulations, codes of practice and job specification. Completed |
Evidence:
|
Plant, tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturer recommendations and standard work practices. Completed |
Evidence:
|