The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for work.
|
|
Work instructions, including plans, specifications, quality requirements and operational details, are obtained, confirmed and applied from relevant information to determine the required bricklaying and blocklaying tasks. Completed |
Evidence:
|
Safety (OHS) requirements are followed in accordance with safety plans and policies. Completed |
Evidence:
|
Signage and barricade requirements are identified and implemented. Completed |
Evidence:
|
Plant, tools and equipment selected to carry out tasks are consistent with job requirements, checked for serviceability, and any faults are rectified or reported prior to commencement. Completed |
Evidence:
|
Material quantity requirements are calculated in accordance with plans, specifications and quality requirements. Completed |
Evidence:
|
Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use. Completed |
Evidence:
|
Environmental requirements are identified for the project in accordance with environmental plans and statutory and regulatory authority obligations, and are applied. Completed |
Evidence:
|
Set out curve.
|
|
Key plan curve points are plotted from job drawings and all trammel centres are established on footing slab for construction of the curved masonry wall. Completed |
Evidence:
|
Curve of wall is planned to specified location from trammel or plotted points and marked on footing slab. Completed |
Evidence:
|
Lay first course.
|
|
Mortar is mixed to specifications and spread evenly to the established wall location. Completed |
Evidence:
|
Bricks/blocks are laid to planned set out for line and specified bond according to job specifications. Completed |
Evidence:
|
Work is carried out to job specifications and standards. Completed |
Evidence:
|
Lay wall.
|
|
Gauge is maintained within standard tolerance at every course level. Completed |
Evidence:
|
Vertical face alignment is maintained. Completed |
Evidence:
|
Bricks are cut. Completed |
Evidence:
|
Bricks/blocks are laid level over the length of the wall to the established plan profile. Completed |
Evidence:
|
Bricks/blocks are laid to specified bond with perpendicular joints (perpends) maintained in vertical line. Completed |
Evidence:
|
Construction is completed to requirements of job drawings and specifications. Completed |
Evidence:
|
Finish joints.
|
|
Excess mortar is removed from brick/blockwork surfaces in accordance with manufacturer recommendations, job specifications, standards and codes. Completed |
Evidence:
|
Joints of laid brickwork/blockwork are raked or ruled to correct profile and depth to job specifications. Completed |
Evidence:
|
Brickwork/blockwork is brushed down prior to drying. Completed |
Evidence:
|
Clean up.
|
|
Work area is cleared and materials disposed of, reused or recycled in accordance with legislation, regulations, codes of practice and job specification. Completed |
Evidence:
|
Plant, tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturer recommendations and standard work practices. Completed |
Evidence:
|