NTISthis.com

Evidence Guide: CPCCCM2007A - Use explosive power tools

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

CPCCCM2007A - Use explosive power tools

What evidence can you provide to prove your understanding of each of the following citeria?

Plan and prepare.

  1. Work instructions, including plans, specifications, quality requirements and operational details, are obtained, confirmed and applied from relevant information for planning and preparation.
  2. Safety (OHS) requirements are followed in accordance with safety plans and policies.
  3. Signage and barricade requirements are identified and implemented.
  4. Plant, tools and equipment selected to carry out tasks are consistent with job requirements, checked for serviceability, and any faults are rectified or reported prior to commencement.
  5. Material quantity requirements are calculated in accordance with plans and specifications.
  6. Materials appropriate to work application are identified, obtained, prepared, safely handled and located ready for use.
  7. Environmental requirements are identified for the project in accordance with environmental plans and statutory and regulatory authority obligations, and are applied.
Work instructions, including plans, specifications, quality requirements and operational details, are obtained, confirmed and applied from relevant information for planning and preparation.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Safety (OHS) requirements are followed in accordance with safety plans and policies.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Signage and barricade requirements are identified and implemented.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Plant, tools and equipment selected to carry out tasks are consistent with job requirements, checked for serviceability, and any faults are rectified or reported prior to commencement.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Material quantity requirements are calculated in accordance with plans and specifications.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Materials appropriate to work application are identified, obtained, prepared, safely handled and located ready for use.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Environmental requirements are identified for the project in accordance with environmental plans and statutory and regulatory authority obligations, and are applied.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Set out fasteners.

  1. Minimum distances for set out from edge of substrate material are adhered to in accordance with legislation, regulations and codes of practice.
  2. Material is located and temporarily held or fixed into designed position according to detailed drawings.
Minimum distances for set out from edge of substrate material are adhered to in accordance with legislation, regulations and codes of practice.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Material is located and temporarily held or fixed into designed position according to detailed drawings.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Use EPT.

  1. EPT is checked for operation according to manufacturer specifications and safety (OHS) requirements for use of EPT.
  2. Fastener is selected according to requirements of job.
  3. Charge is selected to assessed requirements for material, base and penetration.
  4. Attachments and accessories are installed to EPT in accordance with manufacturer specifications and safety (OHS) requirements.
  5. Fastener and charge in EPT are located to manufacturer specifications.
  6. EPT operation is carried out and fastener is fixed into place in accordance with manufacturer recommendations, legislation, regulations and codes of practice.
  7. Fastening penetration is checked and appropriate depth into material is applied.
  8. Power regulating device is adjusted for conditions.
  9. Misfire procedures are carried out according to manufacturer recommendations, legislation, regulations and codes of practice.
  10. Temporary holding and fixings are removed without damage to material.
EPT is checked for operation according to manufacturer specifications and safety (OHS) requirements for use of EPT.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Fastener is selected according to requirements of job.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Charge is selected to assessed requirements for material, base and penetration.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Attachments and accessories are installed to EPT in accordance with manufacturer specifications and safety (OHS) requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Fastener and charge in EPT are located to manufacturer specifications.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

EPT operation is carried out and fastener is fixed into place in accordance with manufacturer recommendations, legislation, regulations and codes of practice.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Fastening penetration is checked and appropriate depth into material is applied.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Power regulating device is adjusted for conditions.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Misfire procedures are carried out according to manufacturer recommendations, legislation, regulations and codes of practice.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Temporary holding and fixings are removed without damage to material.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Secure and store equipment and charges.

  1. Charges are stored in designated container in accordance with legislation, regulations and codes of practice and used charges are recorded.
  2. Unused fasteners, the EPT and attachments are stored in a carry case in line with manufacturer recommendations.
  3. Logbook is checked and maintenance recorded according to manufacturer recommendations.
Charges are stored in designated container in accordance with legislation, regulations and codes of practice and used charges are recorded.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Unused fasteners, the EPT and attachments are stored in a carry case in line with manufacturer recommendations.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Logbook is checked and maintenance recorded according to manufacturer recommendations.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Maintain EPT and kit.

  1. Safety features of tools are checked for serviceability in accordance with manufacturer operating manual.
  2. Tools are cleaned and lubricated to manufacturer recommendations.
  3. Periodic maintenance service is carried out to manufacturer specifications.
  4. Diminished stocks of charges and fasteners are replenished to designed effectiveness of EPT kit.
Safety features of tools are checked for serviceability in accordance with manufacturer operating manual.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Tools are cleaned and lubricated to manufacturer recommendations.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Periodic maintenance service is carried out to manufacturer specifications.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Diminished stocks of charges and fasteners are replenished to designed effectiveness of EPT kit.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Clean up.

  1. Work area is cleared and materials disposed of, reused or recycled in accordance with legislation, regulations, codes of practice and job specification.
  2. Plant, tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturer recommendations and standard work practices.
Work area is cleared and materials disposed of, reused or recycled in accordance with legislation, regulations, codes of practice and job specification.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Plant, tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturer recommendations and standard work practices.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

This unit of competency could be assessed in the workplace or a close simulation of the workplace environment, provided that simulated or project-based assessment techniques fully replicate construction workplace conditions, materials, activities, responsibilities and procedures.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

A person who demonstrates competency in this unit must be able to provide evidence of the ability to:

locate, interpret and apply relevant information, standards and specifications

comply with site safety plan and OHS legislation, regulations and codes of practice applicable to workplace operations

comply with organisational policies and procedures, including quality requirements

safely and effectively use tools and equipment

communicate and work effectively and safely with others

fix metal or timber to a steel, concrete or masonry base on one project of each to job specifications, including:

completion of stripping and assembly of the tool

completing log of serviceability

maintaining and cleaning

selecting charges and fasteners applicable to base material and material being fixed

misfire procedures

using attachments

complying with storage and security regulations and OHS requirements for the working environment

selecting signage

test fire.

Context of and specific resources for assessment

This competency is to be assessed using standard and authorised work practices, safety requirements and environmental constraints.

Assessment of essential underpinning knowledge will usually be conducted in an off-site context.

Assessment is to comply with relevant regulatory or Australian standards' requirements.

Resource implications for assessment include:

an induction procedure and requirement

realistic tasks or simulated tasks covering the mandatory task requirements

relevant specifications and work instructions

tools and equipment appropriate to applying safe work practices

support materials appropriate to activity

workplace instructions relating to safe work practices and addressing hazards and emergencies

material safety data sheets

research resources, including industry related systems information.

Reasonable adjustments for people with disabilities must be made to assessment processes where required. This could include access to modified equipment and other physical resources, and the provision of appropriate assessment support.

Method of assessment

Assessment methods must:

satisfy the endorsed Assessment Guidelines of the Construction, Plumbing and Services Training Package

include direct observation of tasks in real or simulated work conditions, with questioning to confirm the ability to consistently identify and correctly interpret the essential underpinning knowledge required for practical application

reinforce the integration of employability skills with workplace tasks and job roles

confirm that competency is verified and able to be transferred to other circumstances and environments.

Validity and sufficiency of evidence requires that:

competency will need to be demonstrated over a period of time reflecting the scope of the role and the practical requirements of the workplace

where the assessment is part of a structured learning experience the evidence collected must relate to a number of performances assessed at different points in time and separated by further learning and practice, with a decision on competency only taken at the point when the assessor has complete confidence in the person's demonstrated ability and applied knowledge

all assessment that is part of a structured learning experience must include a combination of direct, indirect and supplementary evidence.

Assessment processes and techniques should as far as is practical take into account the language, literacy and numeracy capacity of the candidate in relation to the competency being assessed.

Supplementary evidence of competency may be obtained from relevant authenticated documentation from third parties, such as existing supervisors, team leaders or specialist training staff.

Required Skills and Knowledge

Required skills

Required skills for this unit are:

communication skills to:

determine requirements

enable clear and direct communication, using questioning to identify and confirm requirements, share information, listen and understand

follow instructions

read and interpret:

documentation from a variety of sources

drawings and specifications

report faults

use language and concepts appropriate to cultural differences

use and interpret non-verbal communication, such as hand signals

written skills to record maintenance in logbook

identifying and accurately reporting to appropriate personnel any faults in tools, equipment or materials

numeracy skills to apply measurements and make calculations

organisational skills, including the ability to plan and set out work

teamwork skills to work with others to action tasks and relate to people from a range of cultural and ethnic backgrounds and with varying physical and mental abilities

technological skills to:

use a range of mobile technology, such as two-way radio and mobile phones

voice and hand signals to access and understand site-specific instructions.

Required knowledge

Required knowledge for this unit is:

construction terminology

EPT materials

EPT charges and fasteners

equipment safety manuals and instructions

job safety analysis (JSA) and safe work method statements

material safety data sheets (MSDS)

materials storage and environmentally friendly waste management

plans, specifications and drawings

processes for the calculation of material requirements

quality requirements

relevant Acts, regulations and codes of practice

security and storage procedures for equipment and charges

types, characteristics, uses and limitations of plant, tools and equipment

workplace and equipment safety requirements.

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Information includes:

diagrams or sketches

instructions issued by authorised organisational or external personnel

manufacturer specifications and instructions where specified

memos

MSDS

organisation work specifications and requirements

plans and specifications

regulatory and legislative requirements pertaining to using EPT

relevant Australian standards

safe work procedures related to using EPT

signage

verbal or written and graphical instructions

work bulletins

work schedules.

Planning and preparation include:

work site inspection

equipment defect identification

assessment of conditions and hazards

determination of work requirements.

Safety (OHS) is to be in accordance with legislation, regulations, codes of practice, organisational safety policies and procedures, and project safety plan and may include:

emergency procedures, including extinguishing fires, organisational first aid requirements and evacuation

handling of materials

hazard control

hazardous materials and substances

safe operating procedures, including the conduct of operational risk assessment and treatments associated with:

earth leakage boxes

lighting

power cables, including overhead service trays, cables and conduits

restricted access barriers

surrounding structures

traffic control

trip hazards

work site visitors and the public

working at heights

working in confined spaces

working in proximity to others

working with dangerous materials

organisational first aid

personal protective clothing and equipment prescribed under legislation, regulations and workplace policies and practices

use of firefighting equipment

use of tools and equipment

workplace environment and safety.

Tools and equipment include:

direct action EPT

indirect action EPT

clamps and levels.

Materials include:

timber

metals

patented fasteners.

Environmental requirements include:

clean-up management

noise and dust

vibration

waste management.

Statutory and regulatory authorities include:

federal, state and local authorities administering applicable Acts, regulations and codes of practice.

Minimum distance for set out of fasteners is to be in accordance with:

regulated minimum distances

bases, including concrete, masonry or steel.

Use ofEPT includes:

stripping and assembling tools

completing log of serviceability

maintaining and cleaning tools

selecting charges and fasteners applicable to the base material and material being fixed

misfire procedures

using attachments

complying with storage and security regulations and OHS requirements for the working environment

selecting signage

test fire.

Attachments include:

channel, rebate and other manufacturer attachments.

Fastener and charge include:

firing a test shot with misfire procedures, complying with the regulated safety procedure for misfire.