The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan and prepare.
|
|
Work instructions and operational details are obtained using relevant information, confirmed and applied for planning and preparation purposes. Completed |
Evidence:
|
Safety (OHS) requirements are followed in accordance with safety plans and policies. Completed |
Evidence:
|
Signage and barricade requirements are identified and implemented. Completed |
Evidence:
|
Tools and equipment selected to carry out tasks are consistent with the requirements of the job, checked for serviceability and any faults are rectified or reported prior to commencement. Completed |
Evidence:
|
Material quantity requirements are calculated in accordance with plans and specifications and quality requirements. Completed |
Evidence:
|
Setting materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use. Completed |
Evidence:
|
Environmental requirements are identified for the project in accordance with environmental plans and statutory and regulatory authority requirements applied. Completed |
Evidence:
|
Set segmental pavers.
|
|
Paved area is secured with an edging course (usually a header or soldier course), which may include underpinning the header course with mortar. Completed |
Evidence:
|
Segmental pavers are set using sand, mortar, pebble or other material. Completed |
Evidence:
|
Where required, compacting or rolling equipment is used in accordance with manufacturer specifications. Completed |
Evidence:
|
If using sand for setting, process is repeated until paved area will not take any more filling sand. Completed |
Evidence:
|
If using mortar for setting, excess mortar is removed and pavers are cleaned of excess mortar. Completed |
Evidence:
|
Paving project is checked for chipped or cracked pavers and these are replaced. Completed |
Evidence:
|
If required, sealants or protective coatings are applied following manufacturer specifications. Completed |
Evidence:
|
Clean up.
|
|
Work area is cleared and materials disposed of, reused or recycled in accordance with legislation, regulations, codes of practice and job specification. Completed |
Evidence:
|
Plant, tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturer recommendations and standard work practices. Completed |
Evidence:
|