NTISthis.com

Evidence Guide: CPCCPB3010A - Manually sand plaster work

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

CPCCPB3010A - Manually sand plaster work

What evidence can you provide to prove your understanding of each of the following citeria?

Plan and prepare.

  1. Work instructions and operational details are obtained using relevant information, confirmed and applied for planning and preparation purposes.
  2. Safety (OHS) requirements are followed in accordance with safety plans and policies.
  3. Signage and barricade requirements are identified and implemented.
  4. Tools and equipment selected to carry out tasks are consistent with the requirements of the job, checked for serviceability and any faults are rectified or reported prior to commencement.
  5. Material quantity requirements are calculated in accordance with plans and specifications and quality requirements.
  6. Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use.
  7. Environmental requirements are identified for the project in accordance with environmental plans and regulatory obligations and applied.
Work instructions and operational details are obtained using relevant information, confirmed and applied for planning and preparation purposes.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Safety (OHS) requirements are followed in accordance with safety plans and policies.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Signage and barricade requirements are identified and implemented.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Tools and equipment selected to carry out tasks are consistent with the requirements of the job, checked for serviceability and any faults are rectified or reported prior to commencement.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Material quantity requirements are calculated in accordance with plans and specifications and quality requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Environmental requirements are identified for the project in accordance with environmental plans and regulatory obligations and applied.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Determine work requirements.

  1. Work area is inspected to determine work requirements.
  2. Level of finish as specified in the contract or job order is noted and any mismatches between quality of fixing and finishing are recorded and reported or rectified as appropriate.
  3. Personal protective equipment suitable for the task is selected based on manufacturers' recommended and employer-approved specification.
Work area is inspected to determine work requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Level of finish as specified in the contract or job order is noted and any mismatches between quality of fixing and finishing are recorded and reported or rectified as appropriate.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Personal protective equipment suitable for the task is selected based on manufacturers' recommended and employer-approved specification.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Sand joins.

  1. Work site access is gained using approved workplace methods based on the risk assessment for the task, site and circumstance.
  2. Sanding floats and required dust protection or warning signs are set up for use.
  3. Sanding is completed to required standard of finish.
Work site access is gained using approved workplace methods based on the risk assessment for the task, site and circumstance.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Sanding floats and required dust protection or warning signs are set up for use.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Sanding is completed to required standard of finish.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Inspect work and clean up work area.

  1. Completed sanding work is inspected for compliance with workplace and customer requirements, including contracted level of finish.
  2. Problems are identified and reported.
  3. Sanded area is brushed down.
Completed sanding work is inspected for compliance with workplace and customer requirements, including contracted level of finish.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Problems are identified and reported.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Sanded area is brushed down.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Clean up.

  1. Work area is cleared and materials are disposed of, reused or recycled in accordance with legislation, regulations, codes of practice and job specification.
  2. Sanding dust is cleaned up and contained for disposal in accordance with approved workplace procedures, with any hazardous material identified for separate handling.
  3. Non-toxic materials are removed using correct procedures.
  4. Dust suppression procedures are used to minimise health risk to work personnel and others.
  5. Tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturer recommendations and standard work practices.
Work area is cleared and materials are disposed of, reused or recycled in accordance with legislation, regulations, codes of practice and job specification.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Sanding dust is cleaned up and contained for disposal in accordance with approved workplace procedures, with any hazardous material identified for separate handling.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Non-toxic materials are removed using correct procedures.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Dust suppression procedures are used to minimise health risk to work personnel and others.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturer recommendations and standard work practices.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

This unit of competency could be assessed in the workplace or a close simulation of the workplace environment, provided that simulated or project-based assessment techniques fully replicate construction workplace conditions, materials, activities, responsibilities and procedures.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

A person who demonstrates competency in this unit must be able to provide evidence of the ability to:

select and use appropriate sanding materials and work methods

operate from basic instruction without constant supervision

identify requirements to achieve specified level of finish

identify faults in plasterboard fixing, joining and finishing

execute work within agreed timeframes and standards

interpret delivery documentation and work orders

locate relevant materials

explain warranty, guarantee and liability requirements for plastering work

apply knowledge of industry requirements to identify:

condition and colour of the top coat when set

manufacturers' components and materials

contract compliance requirements

reasons for use of P1 rating (protection against mechanically generated particles) or P2 rating (protection against mechanically and thermally generated particles) mask and protective clothing when sanding topcoats

common faults in materials and work and problems that require reporting

follow work instructions, operating procedures and inspection practices to:

prevent damage to goods, equipment or products

select and use appropriate personal protective equipment

work effectively alone or with others and minimise the risk of injury

modify work activities to cater for variations in work site procedures, contexts and environment

identify and use appropriate behaviour for interactions with other workers, supervisors, clients and members of the public.

Context of and specific resources for assessment

This competency is to be assessed using standard and authorised work practices, safety requirements and environmental constraints.

Assessment of essential underpinning knowledge will usually be conducted in an off-site context.

Assessment is to comply with relevant regulatory or Australian standards' requirements.

Resource implications for assessment include:

stopped plasterboard walls and ceilings

sanding materials

access methods.

Assessment of this unit of competency may be in conjunction with assessment of other units commonly performed at the same time in normal job roles.

Reasonable adjustments for people with disabilities must be made to assessment processes where required. This could include access to modified equipment and other physical resources, and the provision of appropriate assessment support.

Method of assessment

Assessment methods must:

satisfy the endorsed Assessment Guidelines of the Construction, Plumbing and Services Training Package

include direct observation of tasks in real or simulated work conditions, with questioning to confirm the ability to consistently identify and correctly interpret the essential underpinning knowledge required for practical application

reinforce the integration of employability skills with workplace tasks and job roles

confirm that competency is verified and able to be transferred to other circumstances and environments.

Validity and sufficiency of evidence requires that:

competency will need to be demonstrated over a period of time reflecting the scope of the role and the practical requirements of the workplace

where the assessment is part of a structured learning experience the evidence collected must relate to a number of performances assessed at different points in time and separated by further learning and practice, with a decision on competency only taken at the point when the assessor has complete confidence in the person's demonstrated ability and applied knowledge

all assessment that is part of a structured learning experience must include a combination of direct, indirect and supplementary evidence.

Assessment processes and techniques should as far as is practical take into account the language, literacy and numeracy capacity of the candidate in relation to the competency being assessed.

Supplementary evidence of competency may be obtained from relevant authenticated documentation from third parties, such as existing supervisors, team leaders or specialist training staff.

Guidance information for assessment

This unit could be assessed on its own or in combination with other units relevant to the job function, for example:

CPCCCM2010A Work safely at heights.

Reasonable adjustments for people with disabilities must be made to assessment processes where required. This could include access to modified equipment and other physical resources, and the provision of appropriate assessment support.

Assessment processes and techniques should, as far as is practical, take into account the language, literacy and numeracy capacity of the candidate in relation to the competency being assessed.

Required Skills and Knowledge

Required skills

Required skills for this unit are:

communication skills to:

follow instructions

read and interpret:

documentation from a variety of sources

drawings and specifications

recognise procedures

report faults

enable clear and direct communication, using questioning to identify and confirm requirements, share information, listen and understand

use language and concepts appropriate to cultural differences

use and interpret non-verbal communication, such as hand signals

written skills to record results of checks and tests and relevant work completion procedures

evaluate own actions and make judgments about performance and necessary improvements

identifying and accurately reporting to appropriate personnel any faults in tools, equipment or materials

organisational skills, including the ability to plan and set out work

respond to change and contribute to workplace responsibilities, such as current work site environmental and sustainability frameworks and management systems

teamwork skills to work with others to action tasks and relate to people from a range of cultural and ethnic backgrounds and with varying physical and mental abilities

technological skills to:

use a range of mobile technology, such as two-way radio and mobile phones

voice and hand signals to access and understand site-specific instructions.

Required knowledge

Required knowledge for this unit is:

application of product and process knowledge to identify problems and predict consequences

effects of glancing light on plasterboard joins when paint is applied

factors that influence level of finish

identifying from workplace information and labels the type and purpose of materials and potential for health and safety risks

implications on work quality requirements for instruction to be followed

job safety analysis (JSA) and safe work method statements

manufacturers' product mixing and application procedures and nominated specifications for the work process

manufacturer and supplier instructions for plant and equipment

requirements for a systematic approach to planning own work

safely use equipment, shift and handle products and materials.

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Information includes:

diagrams or sketches

instructions issued by authorised organisational or external personnel

manufacturer specifications and instructions, where specified

material safety data sheets (MSDS)

memos

regulatory and legislative requirements pertaining to sanding plaster work

relevant Australian standards

safe work procedures relating to sanding plaster work

signage

verbal, written and graphical instructions

work bulletins

work schedules, plans and specifications.

Planning and preparation include:

assessment of conditions and hazards

determination of work requirements and safety plans and policies

grade of paper to be used

joins to be hand sanded

method of accessing work site

readiness of topcoat for sanding

work site inspection equipment defect identification.

Safety (OHS) is to be in accordance with state and territory legislation and regulations and project safety plan and may include:

emergency procedures, including extinguishing fires, organisational first aid requirements and evacuation

hazard control

hazardous materials and substances

organisational first aid

PPE prescribed under legislation, regulations and workplace policies and practices

safe operating procedures, including the conduct of operational risk assessment and treatments associated with:

concealed services (water, power and gas)

lighting

traffic control

restricted access barriers

trip hazards

work site visitors and the public

working at heights

working in confined spaces

working in proximity to others

use of firefighting equipment

use of tools and equipment

workplace environmental requirements and safety.

Tools and equipment include:

broad knives

brooms

electric screw guns

hand and power drills

hand saws

keyhole saws

measuring tapes and rules

paintbrushes

plasterboard hammers

plasterer's trowels

scaffold planks

T squares

taping knives

trestles.

Quality requirements include relevant regulations, including:

Australian standards

internal company quality policy and standards

manufacturer specifications

workplace operations and procedures.

Materials include:

beads

cement render

fibre cement sheets

finishing materials

plaster compounds

plasterboard

plasterglass sheets

water resistant plasterboard.

Environmental requirements include:

clean-up management

dust and noise

vibration

waste management.

Problems with completed work include:

sand-through areas.