The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan and prepare.
|
|
Work instructions and operational details are obtained using relevant information, confirmed and applied for planning and preparation purposes. Completed |
Evidence:
|
Safety (OHS) requirements are followed in accordance with safety plans and policies. Completed |
Evidence:
|
Signage and barricade requirements are identified and implemented. Completed |
Evidence:
|
Plant, tools and equipment selected to carry out tasks are consistent with the requirements of the job, checked for serviceability and any faults are rectified or reported prior to commencement. Completed |
Evidence:
|
Materials quantity requirements are calculated in accordance with plans, specifications and quality requirements. Completed |
Evidence:
|
Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use. Completed |
Evidence:
|
Environmental requirements are identified for the project in accordance with environmental plans and regulatory obligations and applied. Completed |
Evidence:
|
Prepare materials and application area.
|
|
Area is set up for application processes to suit spray system being used. Completed |
Evidence:
|
Adjoining surfaces to application area are protected by masking off or covering prior to application of spray paint. Completed |
Evidence:
|
Adequate ventilation to application area is provided to maintain a safe environment. Completed |
Evidence:
|
Measures are taken to ensure application area remains free of dust and foreign matter. Completed |
Evidence:
|
Paint is mixed and viscosity adjusted to allow for application process for spray paint finishing materials, in accordance with equipment and manufacturer requirements and plans and specification. Completed |
Evidence:
|
Set up and test spray equipment.
|
|
Spray equipment, accessories and lines for selected spray system are identified, selected and set up in the operating location in accordance with manufacturer recommendations, plans and specification. Completed |
Evidence:
|
Fittings are checked for function and security prior to use in accordance with manufacturer recommendations. Completed |
Evidence:
|
Safety devices are identified and tested, and defects corrected in accordance with standard operational and manufacturer requirements. Completed |
Evidence:
|
Apply paint using the spray system.
|
|
Spray equipment is operated to standard operating procedures in accordance with manufacturer recommendations. Completed |
Evidence:
|
Paint is applied to surface using correct application technique to achieve an even finish with opacity and sheen level in accordance with job specification. Completed |
Evidence:
|
Defects in coating are identified and corrective action is taken to achieve required spray paint finish in accordance with the job specification. Completed |
Evidence:
|
Clean up and store equipment.
|
|
Spray gun and associated components and equipment are dismantled, checked, cleaned and maintained in accordance with manufacturer recommendations and operator's manual. Completed |
Evidence:
|
Spray paint materials and solvents are stored safely to manufacturer specifications and company procedures. Completed |
Evidence:
|
Paint waste, water and solvents used in cleaning painting equipment are disposed of in an environmentally sustainable manner and in accordance with relevant legislative requirements Completed |
Evidence:
|
Work area is cleared and materials disposed of, reused or recycled in accordance with legislation, regulations, codes of practice and job specification. Completed |
Evidence:
|