The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan and prepare.
|
|
Work instructions and operational details are obtained using relevant information, confirmed and applied for planning and preparation purposes. Completed |
Evidence:
|
Safety (OHS) requirements are followed in accordance with safety plans and policies. Completed |
Evidence:
|
Signage and barricade requirements are identified and implemented. Completed |
Evidence:
|
Plant, tools and equipment are selected to carry out tasks are consistent with the requirements of the job, checked for serviceability and any faults are rectified or reported prior to commencement. Completed |
Evidence:
|
Materials quantity requirements are calculated in accordance with plans, specifications and quality requirements. Completed |
Evidence:
|
Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use. Completed |
Evidence:
|
Environmental requirements are identified for the project in accordance with environmental plans and regulatory obligations and applied. Completed |
Evidence:
|
Prepare site and materials.
|
|
Site area is set up for graffiti removal and preventative application processes to suit surfaces to be treated. Completed |
Evidence:
|
Adjoining surfaces to application area are protected by masking off or covering prior to application of graffiti preventative coatings. Completed |
Evidence:
|
Adequate ventilation is provided for application area. Completed |
Evidence:
|
Stormwater protection systems are installed where appropriate. Completed |
Evidence:
|
Remove graffiti.
|
|
Preparation processes are selected to suit substrate surfaces and graffiti circumstances. Completed |
Evidence:
|
Type of coating previously used to cover graffiti is identified in accordance with current industry standards of practice, manufacturer recommendations and specifications. Completed |
Evidence:
|
Graffiti removal processes are applied to affected area in accordance with current industry standards of practice, manufacturer recommendations and specifications. Completed |
Evidence:
|
Apply preventative application material.
|
|
Substrate surfaces are cleaned and prepared for preventative application coatings in accordance with current industry standards of practice and manufacturer recommendations. Completed |
Evidence:
|
Type of preventative coating to cover specific type of graffiti is identified and prepared in accordance with manufacturer recommendations and job specifications. Completed |
Evidence:
|
Preventative application coating to cover specific type of graffiti is applied in accordance with manufacturer recommendations and job specifications. Completed |
Evidence:
|
Clean up and store equipment.
|
|
Painting equipment is dismantled, cleaned, maintained and stored in accordance with manufacturer recommendations and standard work practices. Completed |
Evidence:
|
Unused materials are sealed and stored/stacked in accordance with standard material handling practices and company procedure. Completed |
Evidence:
|
Work area is cleared and materials disposed of, reused or recycled in accordance with legislation, regulations, codes of practice and job specification. Completed |
Evidence:
|
Plant, tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturer recommendations and standard work practices. Completed |
Evidence:
|