The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan and prepare.
|
|
Work instructions, including plans, specifications, quality requirements and operational details are obtained from relevant information, confirmed and applied for the scope of work required. Completed |
Evidence:
|
Safety (OHS) requirements are followed in accordance with safety plans and policies. Completed |
Evidence:
|
Signage and barricade requirements are identified and implemented. Completed |
Evidence:
|
Plant, tools and equipment selected to carry out tasks are consistent with the requirements of the job, checked for serviceability and any faults are rectified or reported prior to commencement. Completed |
Evidence:
|
Material quantity requirements are calculated in accordance with plans, specifications and quality requirements. Completed |
Evidence:
|
Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use. Completed |
Evidence:
|
Environmental requirements are identified for the project in accordance with environmental plans and statutory and legislative authority obligations and applied. Completed |
Evidence:
|
Plan crane erection.
|
|
Crane erection, rigging and dismantling plan are identified and checked for conformity with manufacturer and engineer's specifications. Completed |
Evidence:
|
Hazard control measures are planned and implemented. Completed |
Evidence:
|
Foundation to support crane base is checked for conformity and structural suitability in accordance with engineer's specifications. Completed |
Evidence:
|
Select equipment.
|
|
Resources, materials and equipment are selected in accordance with load charts and inspected for compliance with job specifications. Completed |
Evidence:
|
Lifting equipment is inspected according to regulatory requirements and manufacturer specifications. Completed |
Evidence:
|
Lifting and load shifting equipment identified as inconsistent with manufacturer specifications is labelled, rejected and disposed of to prevent its use in any circumstance. Completed |
Evidence:
|
Elevated work platforms and other means of mechanical access systems are determined and selected where specified. Completed |
Evidence:
|
Fall arrest equipment is installed. Completed |
Evidence:
|
Personnel cartage systems are identified and selected. Completed |
Evidence:
|
Assemble and erect tower crane.
|
|
Base of crane is located and positioned in accordance with manufacturer and engineer's specifications. Completed |
Evidence:
|
Bottom tower and climbing frame/transition piece are erected and installed level and plumb to manufacturer and engineer's specifications. Completed |
Evidence:
|
Tower braces or guys are installed and secured to support tower crane. Completed |
Evidence:
|
Mast, turntable, machine deck and power pack of crane are assembled, erected and installed in accordance with manufacturer specifications. Completed |
Evidence:
|
Main jib and counter jib are assembled and erected in accordance with manufacturer specifications. Completed |
Evidence:
|
Counter weights are lifted into cradles and secured in accordance with manufacturer specifications. Completed |
Evidence:
|
Wire ropes and hook and block reeving are installed to manufacturer specifications. Completed |
Evidence:
|
Climb (raise/lower) tower crane.
|
|
Drop ladder is removed and monorail is placed and secured. Completed |
Evidence:
|
Crane is secured and placed at balance point ready for climbing. Completed |
Evidence:
|
Tower bolts to transition piece are removed, drifts fitted and rollers checked. Completed |
Evidence:
|
Tower section is moved into place in accordance with manufacturer specifications. Completed |
Evidence:
|
Crane is reconnected with bolts and a visual check of all components and connectors is conducted. Completed |
Evidence:
|
Dismantle crane.
|
|
Electrical and hydraulic lines are safely disconnected. Completed |
Evidence:
|
Power pack, counterweights, climbing frame and crane deck are dismantled and safely lowered to the ground. Completed |
Evidence:
|
Clean up.
|
|
Work area is cleared and materials disposed of, reused or recycled in accordance with legislation, regulations, codes of practice and job specification. Completed |
Evidence:
|
Plant, tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturer recommendations and standard work practices. Completed |
Evidence:
|
Work completion procedures are applied and relevant personnel notified that work is finished. Completed |
Evidence:
|