NTISthis.com

Evidence Guide: CPCCSI3004A - Apply advanced vinyl applications

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

CPCCSI3004A - Apply advanced vinyl applications

What evidence can you provide to prove your understanding of each of the following citeria?

Plan and prepare work.

  1. Quality assurance requirements of signage operations are recognised and adhered to.
  2. Safety (OHS) requirements in accordance with application tasks and workplace operations are recognised and adhered to.
  3. Job requirements are identified from drawings and specifications/instructions and/or client brief.
  4. Specifications, drawings and instructions are interpreted and job requirements and sequence, determined.
  5. Layout is set out to scale using setting out techniques applicable to sign design.
  6. Product range is assessed and selected in accordance with job requirements and relevant Australian standards.
  7. Tools and equipment and materials are selected to carry out tasks consistent with job requirements.
  8. Substrates are identified and prepared in accordance with planned material application.
  9. Colour selection is determined, consistent with job requirements.
  10. Routine maintenance requirements of equipment are identified and implemented in accordance with workplace and quality assurance procedures.
  11. Temporary or permanent application of materials is determined from job requirements.
  12. Potential material shrinkage is determined to ensure quality of completed work.
Quality assurance requirements of signage operations are recognised and adhered to.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Safety (OHS) requirements in accordance with application tasks and workplace operations are recognised and adhered to.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Job requirements are identified from drawings and specifications/instructions and/or client brief.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Specifications, drawings and instructions are interpreted and job requirements and sequence, determined.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Layout is set out to scale using setting out techniques applicable to sign design.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Product range is assessed and selected in accordance with job requirements and relevant Australian standards.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment and materials are selected to carry out tasks consistent with job requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Substrates are identified and prepared in accordance with planned material application.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Colour selection is determined, consistent with job requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Routine maintenance requirements of equipment are identified and implemented in accordance with workplace and quality assurance procedures.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Temporary or permanent application of materials is determined from job requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Potential material shrinkage is determined to ensure quality of completed work.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Layout sign.

  1. Substrate compatibility with vinyl is determined and correct vinyl type identified according to job specifications.
  2. Surface is appropriately cleaned and any previously applied self-adhesive tape is removed carefully, minimising risk of damage to surface.
  3. Layout of sign is produced on computer as per job specifications.
  4. Cut files are prepared and configured correctly to plotter/printer device, outputted and managed.
Substrate compatibility with vinyl is determined and correct vinyl type identified according to job specifications.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Surface is appropriately cleaned and any previously applied self-adhesive tape is removed carefully, minimising risk of damage to surface.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Layout of sign is produced on computer as per job specifications.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Cut files are prepared and configured correctly to plotter/printer device, outputted and managed.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Operate plotter.

  1. Media is loaded to ensure correct tracking and cutting pressure and speed settings are adjusted to suit media.
  2. Cut area dimensions are determined to suit given media.
  3. Vinyl layout is cut using appropriate processes, tools and equipment to ensure minimum waste.
Media is loaded to ensure correct tracking and cutting pressure and speed settings are adjusted to suit media.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Cut area dimensions are determined to suit given media.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Vinyl layout is cut using appropriate processes, tools and equipment to ensure minimum waste.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Operate digital printer.

  1. Media is loaded to ensure correct tracking, and feed calibration is adjusted to suit given media.
  2. Bi-directional calibration is adjusted to suit given media.
  3. Print area dimensions are determined to suit given media and digital layout is printed using appropriate processes, tools and equipment to ensure minimum waste.
Media is loaded to ensure correct tracking, and feed calibration is adjusted to suit given media.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Bi-directional calibration is adjusted to suit given media.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Print area dimensions are determined to suit given media and digital layout is printed using appropriate processes, tools and equipment to ensure minimum waste.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Apply vinyl.

  1. Lettering or background is weeded out using appropriate tools and minimising risk of damage to vinyl.
  2. Transfer or application tape is applied to either lettering or graphics.
  3. Laminate is applied to printed vinyl and vinyl applied to surface free of air bubbles and creases and according to layout that conforms to design specifications.
  4. Surface of vinyl is finished and trimmed consistent with job requirements.
Lettering or background is weeded out using appropriate tools and minimising risk of damage to vinyl.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Transfer or application tape is applied to either lettering or graphics.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Laminate is applied to printed vinyl and vinyl applied to surface free of air bubbles and creases and according to layout that conforms to design specifications.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Surface of vinyl is finished and trimmed consistent with job requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Clean up finished sign.

  1. Sign and surrounding surface environment/area are cleaned and waste materials removed in accordance with statutory and regulatory authority requirements.
  2. Tools and equipment, including personal protective equipment, are cleaned, maintained and stored.
Sign and surrounding surface environment/area are cleaned and waste materials removed in accordance with statutory and regulatory authority requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment, including personal protective equipment, are cleaned, maintained and stored.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

This unit of competency could be assessed in the workplace or a close simulation of the workplace environment, provided that simulated or project-based assessment techniques fully replicate construction workplace conditions, materials, activities, responsibilities and procedures.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

A person who demonstrates competency in this unit must be able to provide evidence of:

understanding and applying:

principles of vinyl cutting

vinyl theory

attributes of vinyl

applying appropriate software to produce vinyl signage

correct and effective protocols for using computers and software

applying vinyl to vehicle panels, free of air bubbles.

Context of and specific resources for assessment

This competency is to be assessed using standard and authorised work practices, safety requirements and environmental constraints.

Assessment of essential underpinning knowledge will usually be conducted in an off-site context.

Assessment is to comply with relevant regulatory or Australian standards' requirements.

Resource implications for assessment include:

an induction procedure and requirement

realistic tasks or simulated tasks covering the mandatory task requirements

relevant specifications and work instructions

tools and equipment appropriate to producing vinyl signage

support materials appropriate to activity

workplace instructions relating to producing vinyl signage

material safety data sheets

research resources, including industry-related systems information

range of digital printers

relevant software.

Reasonable adjustments for people with disabilities must be made to assessment processes where required. This could include access to modified equipment and other physical resources, and the provision of appropriate assessment support.

Method of assessment

Assessment methods must:

satisfy the endorsed Assessment Guidelines of the Construction, Plumbing and Services Training Package

include direct observation of tasks in real or simulated work conditions, with questioning to confirm the ability to consistently identify and correctly interpret the essential underpinning knowledge required for practical application

reinforce the integration of employability skills with workplace tasks and job roles

confirm that competency is verified and able to be transferred to other circumstances and environments.

Validity and sufficiency of evidence requires that:

competency will need to be demonstrated over a period of time reflecting the scope of the role and the practical requirements of the workplace

where the assessment is part of a structured learning experience the evidence collected must relate to a number of performances assessed at different points in time and separated by further learning and practice, with a decision on competency only taken at the point when the assessor has complete confidence in the person's demonstrated ability and applied knowledge

all assessment that is part of a structured learning experience must include a combination of direct, indirect and supplementary evidence.

Assessment processes and techniques should as far as is practical take into account the language, literacy and numeracy capacity of the candidate in relation to the competency being assessed.

Supplementary evidence of competency may be obtained from relevant authenticated documentation from third parties, such as existing supervisors, team leaders or specialist training staff.

Required Skills and Knowledge

Required skills

Required skills for this unit are:

ability to apply layout and design concepts and principles

ability to recognise procedures, respond to change and contribute to workplace responsibilities, such as current work site environmental and sustainability frameworks or management systems

communication skills to:

determine requirements

enable clear and direct communication, using questioning to identify and confirm requirements, share information, listen and understand

follow instructions

read and interpret:

charts and hand drawings

computer programs

design principles

job drawings

manufacturer specifications and instructions

organisational work specifications

requirements and instructions issued by authorised organisational or external personnel

report faults

use and interpret non-verbal communication

use language and concepts appropriate to cultural differences

innovation skills to select appropriate tools and equipment, respond to workplace challenges and put ideas into action

organisational skills, including the ability to plan and set out work

problem solving skills to recognise, and take action to rectify, minor faults and problems

teamwork skills to be able to coordinate with others, action tasks and relate to people from a range of social, cultural, ethnic backgrounds and with varying physical and mental abilities.

Required knowledge

Required knowledge for this unit is:

job safety analysis (JSA) and safe work method statements

material safety data sheets (MSDS)

relevant Australian and New Zealand standards, and:

manufacturer specifications

other applicable codes or standard operating procedures relevant to the sector

terminology and definitions used in signage

theory of cutting vinyl, including:

blade offset setting

blade types

cutting pressure

cutting speed

function of plotters

function of printers

printer calibration settings

purpose of test cut

vinyl tracking

vinyl types and uses in sign manufacture.

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Quality assurance requirements include:

attention to work specifications

Australian and international standards relevant to the sign industry

control of handling procedures

internal company quality assurance policy and risk management strategies

procedures for installing and finishing

quality of materials

use and maintenance of equipment

workplace operations and procedures.

Safety (OHS) is to be in accordance with state and territory legislation and regulations and project safety plan and may include:

emergency procedures, including extinguishing fires, organisational first aid requirements and evacuation

hazard control

hazardous materials and substances

organisational first aid

PPE prescribed under legislation, regulations and workplace policies and practices

safe operating procedures, including the conduct of operational risk assessment and treatments associated with:

concealed services (water, power and gas)

lighting

restricted access barriers

traffic control

work site visitors and the public

working at heights

working in confined spaces

working in proximity to others

use of firefighting equipment

use of machines

use of tools and equipment

workplace environmental requirements and safety.

Job requirements include:

assessment of conditions and hazards

determination of work requirements

equipment defect identification

safety plans and policies

work site inspection.

Clients include:

business owners

printers

property owners

sign manufacturers

statutory bodies.

Relevant Australian standards include:

regulatory requirements

standard drawings and details

urban design manuals.

Tools and equipment include:

application fluid

application tape

applicators

coloured marking pencils

metal rules

weeding tools.

Substrates types include:

corflute

glass surfaces

illuminated surfaces

metals

plastics

vehicle panels.

Vinyl includes:

calendared (polymeric/monomeric)

cast

easy apply (vehicle wrap)

translucent.

Layout of sign includes:

function of printers

printer calibration settings

test print

vinyl tracking.

Vinyl layout cut includes:

blade types

cutting pressure

cutting speed

function of plotters

test cut

vinyl tracking.

Applied to surface includes:

curved (irregular)

flat

illuminated.

Statutory and regulatory authority requirements include:

federal, state and local authorities administering applicable Acts, regulations and codes of practice and also can pertain to:

removal of waste products

storage of chemicals.