NTISthis.com

Evidence Guide: CPCCWF2002A - Use wall and floor tiling tools and equipment

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

CPCCWF2002A - Use wall and floor tiling tools and equipment

What evidence can you provide to prove your understanding of each of the following citeria?

Plan and prepare.

  1. Work instructions and operational details are obtained using relevant information, confirmed and applied for planning and preparation purposes.
  2. Safety (OHS) requirements are followed in accordance with safety plans and policies.
  3. Signage and barricade requirements are identified and implemented.
  4. Environmental requirements are identified for the project in accordance with environmental plans and regulatory obligations and applied.
Work instructions and operational details are obtained using relevant information, confirmed and applied for planning and preparation purposes.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Safety (OHS) requirements are followed in accordance with safety plans and policies.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Signage and barricade requirements are identified and implemented.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Environmental requirements are identified for the project in accordance with environmental plans and regulatory obligations and applied.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify hand and power tools.

  1. Hand and power tools, their functions, operations and limitations are identified.
  2. OHS requirements for using hand tools are recognised and adhered to.
  3. OHS requirements for using power tools are recognised and adhered to.
Hand and power tools, their functions, operations and limitations are identified.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

OHS requirements for using hand tools are recognised and adhered to.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

OHS requirements for using power tools are recognised and adhered to.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Select tools for project.

  1. Tools and equipment are selected consistent with job and quality requirements.
  2. Tools, including leads and hoses, are checked for current tags, serviceability and safety and any faults reported in accordance with workplace procedures.
  3. Power tools guards, couplings, gauges and controls are checked and maintained in accordance with manufacturer recommendations and workplace procedures.
  4. Equipment to hold or support material during operation is selected.
  5. Pre-operational checks, including lubricants, hydraulic fluid and water, are completed in accordance with manufacturer recommendations.
Tools and equipment are selected consistent with job and quality requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, including leads and hoses, are checked for current tags, serviceability and safety and any faults reported in accordance with workplace procedures.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Power tools guards, couplings, gauges and controls are checked and maintained in accordance with manufacturer recommendations and workplace procedures.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment to hold or support material during operation is selected.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Pre-operational checks, including lubricants, hydraulic fluid and water, are completed in accordance with manufacturer recommendations.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Use tools.

  1. Power and compressed air supply is connected to work area.
  2. Start-up and shut-down procedures are performed in accordance with workplace procedures.
  3. Tools are safely and effectively used according to manufacturer recommendations and regulatory and workplace requirements.
  4. Tools are safely located and switched when not in immediate use.
Power and compressed air supply is connected to work area.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Start-up and shut-down procedures are performed in accordance with workplace procedures.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools are safely and effectively used according to manufacturer recommendations and regulatory and workplace requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools are safely located and switched when not in immediate use.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Select plant and equipment.

  1. Functions and limitations of plant and equipment used in wall and floor tiling are identified.
  2. Method of operation of plant and equipment is identified.
  3. Plant and equipment are checked for safety, and faults reported to supervisor in accordance with workplace procedures.
  4. Plant and equipment requirements for guarding, cut off switches, couplings, gauges and controls are checked in accordance with workplace procedures.
  5. Plant and equipment are selected consistent with hazard minimisation and needs of job.
  6. Requirements for operating and using plant and equipment are recognised and adhered to in accordance with workplace procedures.
Functions and limitations of plant and equipment used in wall and floor tiling are identified.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Method of operation of plant and equipment is identified.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Plant and equipment are checked for safety, and faults reported to supervisor in accordance with workplace procedures.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Plant and equipment requirements for guarding, cut off switches, couplings, gauges and controls are checked in accordance with workplace procedures.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Plant and equipment are selected consistent with hazard minimisation and needs of job.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Requirements for operating and using plant and equipment are recognised and adhered to in accordance with workplace procedures.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Use plant and equipment.

  1. Plant and equipment are safely and effectively used.
  2. Plant and equipment are safely located and switched off when not in immediate use.
  3. Tools and equipment are inspected, maintained, tagged and faults reported in accordance with workplace procedures.
Plant and equipment are safely and effectively used.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Plant and equipment are safely located and switched off when not in immediate use.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are inspected, maintained, tagged and faults reported in accordance with workplace procedures.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Clean up.

  1. Work area is cleared and materials disposed of, reused or recycled in accordance with legislation, regulations, codes of practice and job specification.
  2. Tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturer recommendations and standard work practices.
Work area is cleared and materials disposed of, reused or recycled in accordance with legislation, regulations, codes of practice and job specification.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturer recommendations and standard work practices.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

This unit of competency could be assessed in the workplace or a close simulation of the workplace environment, provided that simulated or project-based assessment techniques fully replicate construction workplace conditions, materials, activities, responsibilities and procedures.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

A person who demonstrates competency in this unit must be able to provide evidence of the ability to:

locate, interpret and apply relevant information, standards and specifications

comply with site safety plan and OHS legislation, regulations and codes of practice applicable to workplace operations

comply with organisational policies and procedures including quality requirements

safely and effectively operate and use tools, plant and equipment

communicate and work effectively and safely with others

as a minimum, follow work instructions, operating procedures and inspection practices to use the wall and floor tiling tools and equipment listed in the range statement for their appropriate application, ensuring:

correct identification, selection and use of appropriate processes, tools and equipment

correct selection and use of appropriate processes, tools and equipment

completing all work to specification

compliance with regulations, standards and organisational quality procedures and processes.

Context of and specific resources for assessment

This competency is to be assessed using standard and authorised work practices, safety requirements and environmental constraints.

Assessment of essential underpinning knowledge will usually be conducted in an off-site context.

Assessment is to comply with relevant regulatory or Australian standards' requirements.

Resource implications for assessment include:

workplace location or simulated workplace

materials relevant to using wall and floor tiling tools and equipment

hand and power tools, plant and equipment appropriate to using wall and floor tiling tools and equipment

realistic activities covering the mandatory task requirements

specifications and work instructions.

Assessment of this unit of competency may be in conjunction with assessment of other units commonly performed at the same time in normal job roles.

Reasonable adjustments for people with disabilities must be made to assessment processes where required. This could include access to modified equipment and other physical resources, and the provision of appropriate assessment support.

Method of assessment

Assessment methods must:

satisfy the endorsed Assessment Guidelines of the Construction, Plumbing and Services Training Package

include direct observation of tasks in real or simulated work conditions, with questioning to confirm the ability to consistently identify and correctly interpret the essential underpinning knowledge required for practical application

reinforce the integration of employability skills with workplace tasks and job roles

confirm that competency is verified and able to be transferred to other circumstances and environments.

Validity and sufficiency of evidence requires that:

competency will need to be demonstrated over a period of time reflecting the scope of the role and the practical requirements of the workplace

where the assessment is part of a structured learning experience the evidence collected must relate to a number of performances assessed at different points in time and separated by further learning and practice, with a decision on competency only taken at the point when the assessor has complete confidence in the person's demonstrated ability and applied knowledge

all assessment that is part of a structured learning experience must include a combination of direct, indirect and supplementary evidence.

Assessment processes and techniques should as far as is practical take into account the language, literacy and numeracy capacity of the candidate in relation to the competency being assessed.

Supplementary evidence of competency may be obtained from relevant authenticated documentation from third parties, such as existing supervisors, team leaders or specialist training staff.

Required Skills and Knowledge

Required skills

Required skills for this unit are:

communication skills to:

follow instructions

read and interpret:

documentation from a variety of sources

drawings and specifications

recognise procedures

report faults

enable clear and direct communication, using questioning to identify and confirm requirements, share information, listen and understand

use language and concepts appropriate to cultural differences

use and interpret non-verbal communication, such as hand signals

written skills to record results of checks and tests and relevant work completion procedures

evaluate own actions and make judgments about performance and necessary improvements

identifying and accurately reporting to appropriate personnel any faults in tools, equipment or materials

organisational skills, including the ability to plan and set out work

respond to change and contribute to workplace responsibilities, such as current work site environmental and sustainability frameworks and management systems

teamwork skills to work with others to action tasks and relate to people from a range of cultural and ethnic backgrounds and with varying physical and mental abilities

technological skills to:

use a range of mobile technology, such as two-way radio and mobile phones

voice and hand signals to access and understand site-specific instructions.

Required knowledge

Required knowledge for this unit is:

characteristics and applications of wall and floor tiling tools and equipment

general construction terminology

job safety analysis (JSA) and safe work method statements

material safety data sheets (MSDS)

materials storage and environmentally friendly waste management

measuring and marking

plans, drawings and specifications

plant, tools and equipment types, characteristics, uses and limitations

processes for the calculation of material requirements

quality requirements

techniques and procedures for using wall and floor tiling tools and equipment

workplace and equipment safety requirements.

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Information includes:

diagrams or sketches

instructions issued by authorised organisational or external personnel

manufacturer specifications and instructions, where specified

MSDS

memos

regulatory and legislative requirements pertaining to using wall and floor tiling tools and equipment

relevant Australian standards

safe work procedures relating to using wall and floor tiling tools and equipment

signage

verbal, written and graphical instructions

work bulletins

work schedules, plans and specifications.

Planning and preparation include:

assessment of conditions and hazards

determination of work requirements and safety plans and policies

equipment defect identification

work site inspection.

Safety (OHS) is to be in accordance with state and territory legislation and regulations and project safety plan and may include:

emergency procedures, including extinguishing fires, organisational first aid requirements and evacuation

hazard control

hazardous materials and substances

organisational first aid

PPE prescribed under legislation, regulations and workplace policies and practices

safe operating procedures, including the conduct of operational risk assessment and treatments associated with:

concealed services (water, power and gas)

lighting

traffic control

restricted access barriers

trip hazards

work site visitors and the public

working at heights

working in confined spaces

working in proximity to others

use of firefighting equipment

use of tools and equipment

workplace environmental requirements and safety.

Environmental requirements include:

clean-up management

dust and noise

vibration

waste management.

Selection and operation of hand and power tools and equipment involve:

correct application

effective operation

identification.

Tools and equipment:

include:

buckets

caulking guns

levelling equipment:

straight edges

line levels

stringlines

spirit levels

water levels

lump hammers

measuring tapes and rules

nippers

pointed grouters

rags

rubber mallets

scrapers

shovels

spacers and wedges

sponges

squares

squeegees

straight edges

tile cutters and scribes

trowels

wet and dry diamond saws

wooden floats

may include:

adhesive mixers

beating machines

concrete mixers

grouting machines

masonry drill bits

screeding machines

plant and equipment, including:

small petrol or diesel engines

small compressors

power tools, including:

power drills

power leads

small generators.

Quality requirements include relevant regulations, including:

Australian standards

internal company quality policy and standards

manufacturer specifications

workplace operations and procedures.