The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for work.
|
|
Job drawings and specifications are obtained from job supervisor and job requirements are adhered to. Completed |
Evidence:
|
Safety (OHS) requirements associated with cutting with oxy-LPG-acetylene and workplace environmental requirements are adhered to throughout the work. Completed |
Evidence:
|
Quality assurance requirements are identified and adhered to in accordance with workplace requirements. Completed |
Evidence:
|
Tasks are planned and sequenced in conjunction with others involved in or affected by the work. Completed |
Evidence:
|
Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability. Completed |
Evidence:
|
Work area is prepared to support efficient cutting with oxy-LPG-acetylene. Completed |
Evidence:
|
Identify cutting requirements.
|
|
Cutting requirements are identified from drawings and specifications. Completed |
Evidence:
|
Safety precautions are undertaken prior to welding in compliance with the job specification and standards. Completed |
Evidence:
|
Perform cuts and inspect.
|
|
Oxy-LPG-acetylene cutting equipment is set up in accordance with manufacturer guidelines. Completed |
Evidence:
|
Tip size is selected as appropriate for the materials to be cut. Completed |
Evidence:
|
Cutting pressures are adjusted to manufacturer recommendations for the materials to be cut. Completed |
Evidence:
|
Materials are prepared for cutting in accordance with plans and specification. Completed |
Evidence:
|
Materials are marked out and clamped prior to cutting. Completed |
Evidence:
|
Flame is set and cuts are performed in accordance with the specified cutting procedures to effect a clean cut. Completed |
Evidence:
|
Completed cuts are visually inspected for compliance with job specifications, and defects are repaired using appropriate techniques. Completed |
Evidence:
|
Clean up.
|
|
Work area is cleared and materials disposed of or recycled in accordance with state or territory statutory and regulatory authority legislation and workplace procedures. Completed |
Evidence:
|
Tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturer recommendations and workplace procedures. Completed |
Evidence:
|
Information is accessed and documentation completed in accordance with workplace requirements. Completed |
Evidence:
|