The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for work.
|
|
Drawings and specifications are obtained from job supervisor and site inspection. Completed |
Evidence:
|
Safety (OHS) requirements associated with the flashing of penetrations through roofs and walls, and workplace environmental requirements, are adhered to throughout the work. Completed |
Evidence:
|
Quality assurance requirements are identified and adhered to in accordance with workplace requirements. Completed |
Evidence:
|
Tasks are planned and sequenced in conjunction with others involved in or affected by the work. Completed |
Evidence:
|
Tools and equipment, including personal protective equipment, are selected and checked for serviceability. Completed |
Evidence:
|
Work area is prepared to support efficient flashing of penetrations through roofs and walls. Completed |
Evidence:
|
Identify flashing requirements.
|
|
Roof and wall penetrations are identified from drawings and specifications. Completed |
Evidence:
|
Penetrations are assessed as required to allow for the location of existing and future services. Completed |
Evidence:
|
Material requirements are calculated from the job specification, in compliance with standards. Completed |
Evidence:
|
Materials are identified, ordered and collected in accordance with workplace procedures. Completed |
Evidence:
|
Materials and equipment are checked for compliance with docket and order form, and for acceptable condition. Completed |
Evidence:
|
Flash penetrations.
|
|
Fabrication is undertaken in accordance with plans and specifications. Completed |
Evidence:
|
Penetration is positioned and cut in compliance with plans, specifications and site measurements. Completed |
Evidence:
|
Structural supports are installed in accordance with plans and specifications. Completed |
Evidence:
|
Opening is prepared in compliance with specifications, manufacturer recommendations and regulations. Completed |
Evidence:
|
Proprietary or purpose-made flashing is fitted in accordance with standards, plans, specifications and regulations. Completed |
Evidence:
|
Sealant is applied in compliance with specifications and manufacturer recommendations. Completed |
Evidence:
|
Penetration is performance tested to ensure correct fit of completed installation, and remedied as required. Completed |
Evidence:
|
Clean up.
|
|
Work area is cleared and materials disposed of or recycled in accordance with state or territory statutory and regulatory authority legislation and workplace procedures. Completed |
Evidence:
|
Tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturer recommendations and workplace procedures. Completed |
Evidence:
|
Information is accessed and documentation completed in accordance with workplace requirements. Completed |
Evidence:
|