The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Identify gas piping system requirements.
|
|
Plans, specifications and any special instructions are obtained. Completed |
Evidence:
|
Safety (OHS) requirements associated with installation of subsidiary gas meters, and workplace environmental requirements, are adhered to throughout the work. Completed |
Evidence:
|
Quality assurance requirements for company operations are identified and adhered to. Completed |
Evidence:
|
Gas load requirements are determined from specifications or given information. Completed |
Evidence:
|
Size of meter is determined in accordance with standards, statutory and regulatory authority and workplace requirements. Completed |
Evidence:
|
Meter is located in accordance with specifications or instructions, and complies with standards, and authorities' and workplace requirements. Completed |
Evidence:
|
Quantity and type of materials to conform to authorities' requirements and appropriate standards are estimated from specifications or on-site dimensions. Completed |
Evidence:
|
Prepare for installation.
|
|
Meter and materials are ordered and checked for compliance with docket and order form, and for acceptable condition. Completed |
Evidence:
|
Appropriate tools and equipment for installing meter, including personal protective equipment, are identified, selected and checked for serviceability. Completed |
Evidence:
|
Appropriate testing equipment is selected. Completed |
Evidence:
|
Work is planned in conjunction with others involved in or affected by the work. Completed |
Evidence:
|
Work area and materials are prepared to support efficient installation of meter. Completed |
Evidence:
|
Install and test subsidiary gas meter.
|
|
Support and installation method, including any fixings, are selected to comply with manufacturer instructions, standards and workplace requirements. Completed |
Evidence:
|
Pipe section is isolated. Completed |
Evidence:
|
Meter is installed in accordance with specifications or instructions, and complies with standards and authorities' requirements. Completed |
Evidence:
|
Installation is purged in accordance with standards. Completed |
Evidence:
|
Meter is tested and pressure set in accordance with standards and authorities' requirements. Completed |
Evidence:
|
If required, leaks are located and repaired, and installation is retested. Completed |
Evidence:
|
Test data is recorded in format required by regulating authority and workplace requirements. Completed |
Evidence:
|
Clean up.
|
|
Work area is cleared and materials disposed of or recycled in accordance with state and territory legislation and workplace procedures. Completed |
Evidence:
|
Tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturer recommendations and workplace procedures. Completed |
Evidence:
|
Information is accessed and documentation completed in accordance with workplace requirements. Completed |
Evidence:
|