NTISthis.com

Evidence Guide: CPPCLO3019 - Remove waste and recyclable materials

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

CPPCLO3019 - Remove waste and recyclable materials

What evidence can you provide to prove your understanding of each of the following citeria?

Plan and prepare to handle waste.

  1. General waste, contaminated and biological waste and recyclable items are identified according to company requirements, and any issues are clarified.
  2. Work site hazards are assessed and risks controlled according to company, legislative, and health and safety requirements.
  3. Equipment is selected according to job requirements, checked for serviceability, and faults are rectified or reported before starting work.
  4. Cleaning chemicals are selected and prepared according to manufacturer specifications, and health and safety, and company requirements.
  5. Personal protective equipment (PPE) is sourced and used according to manufacturer specifications, and health and safety, and company requirements.
  6. Tasks are sequenced to ensure maximum efficiency when completing cleaning requirements.
General waste, contaminated and biological waste and recyclable items are identified according to company requirements, and any issues are clarified.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work site hazards are assessed and risks controlled according to company, legislative, and health and safety requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment is selected according to job requirements, checked for serviceability, and faults are rectified or reported before starting work.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Cleaning chemicals are selected and prepared according to manufacturer specifications, and health and safety, and company requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Personal protective equipment (PPE) is sourced and used according to manufacturer specifications, and health and safety, and company requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tasks are sequenced to ensure maximum efficiency when completing cleaning requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Transfer waste to waste carrier.

  1. Waste items are collected and safely transferred to waste carrier according to health and safety, and company requirements.
  2. Biological waste is transferred to biohazard bins according to health and safety requirements.
  3. Rubbish bins and surrounds are spot cleaned according to company requirements.
  4. Soiled rubbish bin liners are replaced according to health and safety, and company requirements.
Waste items are collected and safely transferred to waste carrier according to health and safety, and company requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Biological waste is transferred to biohazard bins according to health and safety requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Rubbish bins and surrounds are spot cleaned according to company requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Soiled rubbish bin liners are replaced according to health and safety, and company requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Transfer waste to disposal unit.

  1. Waste is removed from site according to health and safety, and company requirements.
  2. Waste is transported to disposal units by shortest practical safest route and according to health and safety, and company requirements.
Waste is removed from site according to health and safety, and company requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Waste is transported to disposal units by shortest practical safest route and according to health and safety, and company requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Deliver recyclable materials.

  1. Recyclable materials are identified and separated according to health and safety, and company requirements.
  2. Recyclable materials are transferred safely to dedicated recycling collection units for each type of material according to health and safety, and company requirements.
  3. Recycling containers and surrounds are spot cleaned according to health and safety, and company requirements.
  4. Recycling containers are checked and replaced in designated locations.
  5. Transfer of recyclable materials is documented according to company requirements.
Recyclable materials are identified and separated according to health and safety, and company requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Recyclable materials are transferred safely to dedicated recycling collection units for each type of material according to health and safety, and company requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Recycling containers and surrounds are spot cleaned according to health and safety, and company requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Recycling containers are checked and replaced in designated locations.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Transfer of recyclable materials is documented according to company requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Clean and safety check equipment, and store equipment and chemicals.

  1. Equipment and PPE are cleaned, safety checked and stored according to manufacturer specifications and environmental, health and safety, and company requirements.
  2. Unused chemicals are stored or disposed of according to manufacturer specifications, and health and safety and company requirements.
Equipment and PPE are cleaned, safety checked and stored according to manufacturer specifications and environmental, health and safety, and company requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Unused chemicals are stored or disposed of according to manufacturer specifications, and health and safety and company requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions.

1.

Plan and prepare to handle waste.

1.1.

General waste, contaminated and biological waste and recyclable items are identified according to company requirements, and any issues are clarified.

1.2.

Work site hazards are assessed and risks controlled according to company, legislative, and health and safety requirements.

1.3.

Equipment is selected according to job requirements, checked for serviceability, and faults are rectified or reported before starting work.

1.4.

Cleaning chemicals are selected and prepared according to manufacturer specifications, and health and safety, and company requirements.

1.5.

Personal protective equipment (PPE) is sourced and used according to manufacturer specifications, and health and safety, and company requirements.

1.6.

Tasks are sequenced to ensure maximum efficiency when completing cleaning requirements.

2.

Transfer waste to waste carrier.

2.1.

Waste items are collected and safely transferred to waste carrier according to health and safety, and company requirements.

2.2.

Biological waste is transferred to biohazard bins according to health and safety requirements.

2.3.

Rubbish bins and surrounds are spot cleaned according to company requirements.

2.4.

Soiled rubbish bin liners are replaced according to health and safety, and company requirements.

3.

Transfer waste to disposal unit.

3.1.

Waste is removed from site according to health and safety, and company requirements.

3.2.

Waste is transported to disposal units by shortest practical safest route and according to health and safety, and company requirements.

4.

Deliver recyclable materials.

4.1.

Recyclable materials are identified and separated according to health and safety, and company requirements.

4.2.

Recyclable materials are transferred safely to dedicated recycling collection units for each type of material according to health and safety, and company requirements.

4.3.

Recycling containers and surrounds are spot cleaned according to health and safety, and company requirements.

4.4.

Recycling containers are checked and replaced in designated locations.

4.5.

Transfer of recyclable materials is documented according to company requirements.

5.

Clean and safety check equipment, and store equipment and chemicals.

5.1.

Equipment and PPE are cleaned, safety checked and stored according to manufacturer specifications and environmental, health and safety, and company requirements.

5.2.

Unused chemicals are stored or disposed of according to manufacturer specifications, and health and safety and company requirements.

Required Skills and Knowledge

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions.

1.

Plan and prepare to handle waste.

1.1.

General waste, contaminated and biological waste and recyclable items are identified according to company requirements, and any issues are clarified.

1.2.

Work site hazards are assessed and risks controlled according to company, legislative, and health and safety requirements.

1.3.

Equipment is selected according to job requirements, checked for serviceability, and faults are rectified or reported before starting work.

1.4.

Cleaning chemicals are selected and prepared according to manufacturer specifications, and health and safety, and company requirements.

1.5.

Personal protective equipment (PPE) is sourced and used according to manufacturer specifications, and health and safety, and company requirements.

1.6.

Tasks are sequenced to ensure maximum efficiency when completing cleaning requirements.

2.

Transfer waste to waste carrier.

2.1.

Waste items are collected and safely transferred to waste carrier according to health and safety, and company requirements.

2.2.

Biological waste is transferred to biohazard bins according to health and safety requirements.

2.3.

Rubbish bins and surrounds are spot cleaned according to company requirements.

2.4.

Soiled rubbish bin liners are replaced according to health and safety, and company requirements.

3.

Transfer waste to disposal unit.

3.1.

Waste is removed from site according to health and safety, and company requirements.

3.2.

Waste is transported to disposal units by shortest practical safest route and according to health and safety, and company requirements.

4.

Deliver recyclable materials.

4.1.

Recyclable materials are identified and separated according to health and safety, and company requirements.

4.2.

Recyclable materials are transferred safely to dedicated recycling collection units for each type of material according to health and safety, and company requirements.

4.3.

Recycling containers and surrounds are spot cleaned according to health and safety, and company requirements.

4.4.

Recycling containers are checked and replaced in designated locations.

4.5.

Transfer of recyclable materials is documented according to company requirements.

5.

Clean and safety check equipment, and store equipment and chemicals.

5.1.

Equipment and PPE are cleaned, safety checked and stored according to manufacturer specifications and environmental, health and safety, and company requirements.

5.2.

Unused chemicals are stored or disposed of according to manufacturer specifications, and health and safety and company requirements.

A person demonstrating competency in this unit must satisfy the requirements of the elements, performance criteria, foundation skills and range of conditions of this unit.

The person must also use safe and efficient methods to remove waste at three different cleaning sites. Across all three sites they must remove both of the following types of waste:

general

contaminated and hazardous biological waste.

In doing the above work, the person must:

identify the different waste types and correct methods for dealing with each, including health and safety requirements

identify site hazards and control risks before handling waste

select and prepare cleaning equipment and chemicals required for the task

identify items for recycling at each site and arrange for their transfer

clean the rubbish bins and surrounds.

A person demonstrating competency in this unit must demonstrate knowledge of:

environmental requirements relating to removing waste and recyclable materials, including:

clean-up, containment and isolation procedures

environmental protection agency requirements relating to using and disposing of chemicals

key requirements of legislation, regulations, codes of practice and industry advisory standards relating to removing waste and recyclable materials, including:

AS/NZ 3831 Waste management – Glossary of terms

industry advisory standards and codes, such as dangerous goods codes

processes for safely handling and treating waste, including:

recyclable materials

used containers

used or contaminated personal protective equipment (PPE)

used or unused chemicals

safe handling techniques for working with hazardous chemicals, including:

emergency chemical spill control measures

routes of entry and potential symptoms of exposure to chemicals

working according to safety data sheets (SDS)

waste transfer procedures, including:

location of disposal units

location of waste pick-up equipment

use of waste handling equipment

use of waste storage receptacles

selection and use of bin liners.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

General waste must include at least two of the following:

drinks

food packaging

manufactured foods

non-recyclable plastics.

Contaminated and biological waste must include at least one of the following:

blood and other bodily fluids

cytotoxic waste

human waste

soiled and disposable linen

syringes and needles.

Recyclable items must include at least one of the following:

cardboard

computer consumables

glass

metal

packaging material

paper

plastic

printing consumables.

Hazards that must be assessed include:

biological and environmental contaminants

chemical exposure via absorption, ingestion and inhalation

chemical reactivity

dust and fibre particulates

electrical

environmental allergens

explosions

fatigue

fire

manual handling

noise

poor ventilation

slips, trips and falls

syringes and sharps

working in confined spaces.

Health and safety requirements must include:

access to communication devices when working alone

compliance with Safe Work Australia regulations and guidelines

electrical equipment test and tag compliance

emergency response procedures

environmental controls

hazard signs and barricades

health and safety induction and refresher training

manual handling techniques

processes for safely dispensing chemicals

risk assessment procedures, including:

hazardous chemicals register

hierarchy of control

job safety analyses (JSA) for low-risk situations

safe work method statements (SWMS) for high-risk situations

incident reporting

SDS

selection and use of required PPE

storage and maintenance of equipment according to manufacturer specifications

use of first aid according to SDS information.

Equipment must include at least three of the following:

bin liners

cleaning cloths

damp wiping kits

litter picker

long-handled dustpans and brooms

microfibre products

nylon pads

pick-up trolleys

scrubbing brushes

sharps kits

spray bottles

wheelie bins.

Cleaning chemicals must include at least one of the following:

acid cleaners

alkaline cleaners

low environmental impact chemicals

neutral cleaners

solvent cleaners.

Personal protective equipment must include at least two of the following:

disposable respirators

eye protection

gloves

high visibility vests

protective clothing

safety shoes

sun protection

tongs.

Rubbish bins must include at least one of the following:

biohazard bags and bins

contaminated waste bins

general purpose bins

sharps disposal units

radioactive waste bins

recycle bins

restroom bins

wet rubbish bins.

Disposal units must include at least one of the following:

compactors

dump masters

open trucks

wheelie bins.