action to take when a breach of health, safety or other policy occurs basic operation of a central system basic operation of single point emergency and exit lights basic operation of computer monitored single point systems basic theory of AC and DC current battery types used in emergency and exit lighting and basic theory of battery operation, including charge time and ampere hour ratings circuit breakers to be isolated for system inspection common control and indicators required on any single point emergency light commonly used emergency and exit light fittings deemed to comply requirements for exit sign locations, given required egress routes and exit door locations definition of extra low voltage according to AS 3000 Electrical installations (known as the wiring rules) electrical terms associated with emergency and exit lighting factors affecting lifetime of batteries how to determine: minimum and maximum viewing distance of pictorial element on an exit sign whether tubes and globes are: maintained non-maintained sustained identification of circuit breakers to be isolated for system inspection inspection, testing and reporting requirements according to relevant standard, such as AS/NZS 2293 Emergency escape lighting and exit signs for buildings key features of legislation, regulations and codes applicable to testing and maintaining an emergency and exit lighting system, including: implications of not applying legislative requirements to job functions permissible work on emergency and exit lighting that may be undertaken without an electrical licence purpose of the Building Code of Australia (BCA) and deemed to comply requirements relevant to installation of emergency and exit lighting minimum and maximum mounting height for exit signs purpose of an emergency and exit lighting system and examples of where it may be required or installed purpose of wiring diagrams relevant cleaning solutions and their application for cleaning lighting lenses and reflectors safety issues, including: concerns with voltages in excess of extra low voltage requirements for replacing globes, tubes and starters on electrical circuits that power lighting requirements for testing electrical circuits |