NTISthis.com

Evidence Guide: CPPPMT3018 - Maintain equipment and pesticide storage area in pest management vehicles

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

CPPPMT3018 - Maintain equipment and pesticide storage area in pest management vehicles

What evidence can you provide to prove your understanding of each of the following citeria?

Set up storage area in pest management vehicle.

  1. Storage area is secured from unauthorised access according to company and compliance requirements.
  2. Storage area is organised to comply with relevant company and compliance requirements.
  3. Existing hazards are identified and risks controlled in storage area according to company and compliance requirements.
  4. Vehicle equipment and passenger compartments are separated to minimise transportation risks according to company and compliance requirements.
  5. Vehicle is equipped to enable implementation of emergency response procedures according to company and compliance requirements.
  6. Vehicle signage is fixed, as required, according to company and compliance requirements.
  7. Safety warnings are displayed prominently and safety information is made accessible according to company and compliance requirements.
Storage area is secured from unauthorised access according to company and compliance requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Storage area is organised to comply with relevant company and compliance requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Existing hazards are identified and risks controlled in storage area according to company and compliance requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Vehicle equipment and passenger compartments are separated to minimise transportation risks according to company and compliance requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Vehicle is equipped to enable implementation of emergency response procedures according to company and compliance requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Vehicle signage is fixed, as required, according to company and compliance requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Safety warnings are displayed prominently and safety information is made accessible according to company and compliance requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Stock vehicle storage area.

  1. Equipment is stored, maintained and safety checked to enable ready access and re-use according to manufacturer specifications and company and compliance requirements.
  2. Chemicals are stored according to manufacturer specifications and company and compliance requirements.
  3. Personal protective equipment (PPE) is cleaned, safety checked and stored and maintenance requirements are recorded according to manufacturer specifications and company and compliance requirements.
  4. Storage area is maintained free from obstacles according to company and compliance requirements.
  5. Waste is collected and disposed of according to manufacturer specifications and company and compliance requirements.
Equipment is stored, maintained and safety checked to enable ready access and re-use according to manufacturer specifications and company and compliance requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Chemicals are stored according to manufacturer specifications and company and compliance requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Personal protective equipment (PPE) is cleaned, safety checked and stored and maintenance requirements are recorded according to manufacturer specifications and company and compliance requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Storage area is maintained free from obstacles according to company and compliance requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Waste is collected and disposed of according to manufacturer specifications and company and compliance requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Control and maintain stocks of equipment and chemicals.

  1. Inventory system, with maximum and minimum holding levels of equipment and chemicals, is operated and maintained according to company and compliance requirements.
  2. Equipment and chemical usage patterns are monitored and reordered to maintain required levels according to company and compliance requirements.
  3. Accurate labelling system is maintained for all containers according to manufacturer specifications and company and compliance requirements.
  4. Chemicals are used on an oldest-manufactured, first-out basis according to company requirements.
  5. Obsolete equipment and chemicals are disposed of according to manufacturer specifications and company and compliance requirements.
Inventory system, with maximum and minimum holding levels of equipment and chemicals, is operated and maintained according to company and compliance requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Equipment and chemical usage patterns are monitored and reordered to maintain required levels according to company and compliance requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Accurate labelling system is maintained for all containers according to manufacturer specifications and company and compliance requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Chemicals are used on an oldest-manufactured, first-out basis according to company requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Obsolete equipment and chemicals are disposed of according to manufacturer specifications and company and compliance requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Control a pest management vehicle storage area.

  1. Chemicals are secured to prevent accidental spillage, according to manufacturer specifications and company and compliance requirements.
  2. Estimated quantities of chemicals required for immediate work requirements are stored and transported according to manufacturer specifications and company and compliance requirements.
  3. PPE is stored separately to chemicals and vehicle occupants.
  4. Equipment, including PPE, is secured, used and maintained according to manufacturer specifications and company and compliance requirements.
  5. Access to and operation of the pest management vehicle are restricted to authorised personnel according to company and compliance requirements.
Chemicals are secured to prevent accidental spillage, according to manufacturer specifications and company and compliance requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Estimated quantities of chemicals required for immediate work requirements are stored and transported according to manufacturer specifications and company and compliance requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

PPE is stored separately to chemicals and vehicle occupants.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Equipment, including PPE, is secured, used and maintained according to manufacturer specifications and company and compliance requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Access to and operation of the pest management vehicle are restricted to authorised personnel according to company and compliance requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Maintain a pest management vehicle.

  1. Vehicle is safety checked and regular servicing is arranged to ensure roadworthiness according to manufacturer specifications and company and compliance requirements.
  2. Vehicle is cleaned regularly to remove chemical contaminants according to manufacturer specifications and company and compliance requirements.
  3. Waste is collected and disposed of according to manufacturer specifications and company and compliance requirements.
  4. Vehicle is presented and maintained in line with company’s public image according to company requirements.
Vehicle is safety checked and regular servicing is arranged to ensure roadworthiness according to manufacturer specifications and company and compliance requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Vehicle is cleaned regularly to remove chemical contaminants according to manufacturer specifications and company and compliance requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Waste is collected and disposed of according to manufacturer specifications and company and compliance requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Vehicle is presented and maintained in line with company’s public image according to company requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Respond to emergency situations.

  1. Emergency response procedures are implemented when accidental spillages or emergency situations occur, according to manufacturer specifications and company and compliance requirements.
  2. Regulatory and company documentation is prepared according to company and compliance requirements.
Emergency response procedures are implemented when accidental spillages or emergency situations occur, according to manufacturer specifications and company and compliance requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Regulatory and company documentation is prepared according to company and compliance requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions.

1.

Set up storage area in pest management vehicle.

1.1.

Storage area is secured from unauthorised access according to company and compliance requirements.

1.2.

Storage area is organised to comply with relevant company and compliance requirements.

1.3.

Existing hazards are identified and risks controlled in storage area according to company and compliance requirements.

1.4.

Vehicle equipment and passenger compartments are separated to minimise transportation risks according to company and compliance requirements.

1.5.

Vehicle is equipped to enable implementation of emergency response procedures according to company and compliance requirements.

1.6.

Vehicle signage is fixed, as required, according to company and compliance requirements.

1.7.

Safety warnings are displayed prominently and safety information is made accessible according to company and compliance requirements.

2.

Stock vehicle storage area.

2.1.

Equipment is stored, maintained and safety checked to enable ready access and re-use according to manufacturer specifications and company and compliance requirements.

2.2.

Chemicals are stored according to manufacturer specifications and company and compliance requirements.

2.3.

Personal protective equipment (PPE) is cleaned, safety checked and stored and maintenance requirements are recorded according to manufacturer specifications and company and compliance requirements.

2.4.

Storage area is maintained free from obstacles according to company and compliance requirements.

2.5.

Waste is collected and disposed of according to manufacturer specifications and company and compliance requirements.

3.

Control and maintain stocks of equipment and chemicals.

3.1.

Inventory system, with maximum and minimum holding levels of equipment and chemicals, is operated and maintained according to company and compliance requirements.

3.2.

Equipment and chemical usage patterns are monitored and reordered to maintain required levels according to company and compliance requirements.

3.3.

Accurate labelling system is maintained for all containers according to manufacturer specifications and company and compliance requirements.

3.4.

Chemicals are used on an oldest-manufactured, first-out basis according to company requirements.

3.5.

Obsolete equipment and chemicals are disposed of according to manufacturer specifications and company and compliance requirements.

4.

Control a pest management vehicle storage area.

4.1.

Chemicals are secured to prevent accidental spillage, according to manufacturer specifications and company and compliance requirements.

4.2.

Estimated quantities of chemicals required for immediate work requirements are stored and transported according to manufacturer specifications and company and compliance requirements.

4.3.

PPE is stored separately to chemicals and vehicle occupants.

4.4.

Equipment, including PPE, is secured, used and maintained according to manufacturer specifications and company and compliance requirements.

4.5.

Access to and operation of the pest management vehicle are restricted to authorised personnel according to company and compliance requirements.

5.

Maintain a pest management vehicle.

5.1.

Vehicle is safety checked and regular servicing is arranged to ensure roadworthiness according to manufacturer specifications and company and compliance requirements.

5.2.

Vehicle is cleaned regularly to remove chemical contaminants according to manufacturer specifications and company and compliance requirements.

5.3.

Waste is collected and disposed of according to manufacturer specifications and company and compliance requirements.

5.4.

Vehicle is presented and maintained in line with company’s public image according to company requirements.

6.

Respond to emergency situations.

6.1.

Emergency response procedures are implemented when accidental spillages or emergency situations occur, according to manufacturer specifications and company and compliance requirements.

6.2.

Regulatory and company documentation is prepared according to company and compliance requirements.

Required Skills and Knowledge

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions.

1.

Set up storage area in pest management vehicle.

1.1.

Storage area is secured from unauthorised access according to company and compliance requirements.

1.2.

Storage area is organised to comply with relevant company and compliance requirements.

1.3.

Existing hazards are identified and risks controlled in storage area according to company and compliance requirements.

1.4.

Vehicle equipment and passenger compartments are separated to minimise transportation risks according to company and compliance requirements.

1.5.

Vehicle is equipped to enable implementation of emergency response procedures according to company and compliance requirements.

1.6.

Vehicle signage is fixed, as required, according to company and compliance requirements.

1.7.

Safety warnings are displayed prominently and safety information is made accessible according to company and compliance requirements.

2.

Stock vehicle storage area.

2.1.

Equipment is stored, maintained and safety checked to enable ready access and re-use according to manufacturer specifications and company and compliance requirements.

2.2.

Chemicals are stored according to manufacturer specifications and company and compliance requirements.

2.3.

Personal protective equipment (PPE) is cleaned, safety checked and stored and maintenance requirements are recorded according to manufacturer specifications and company and compliance requirements.

2.4.

Storage area is maintained free from obstacles according to company and compliance requirements.

2.5.

Waste is collected and disposed of according to manufacturer specifications and company and compliance requirements.

3.

Control and maintain stocks of equipment and chemicals.

3.1.

Inventory system, with maximum and minimum holding levels of equipment and chemicals, is operated and maintained according to company and compliance requirements.

3.2.

Equipment and chemical usage patterns are monitored and reordered to maintain required levels according to company and compliance requirements.

3.3.

Accurate labelling system is maintained for all containers according to manufacturer specifications and company and compliance requirements.

3.4.

Chemicals are used on an oldest-manufactured, first-out basis according to company requirements.

3.5.

Obsolete equipment and chemicals are disposed of according to manufacturer specifications and company and compliance requirements.

4.

Control a pest management vehicle storage area.

4.1.

Chemicals are secured to prevent accidental spillage, according to manufacturer specifications and company and compliance requirements.

4.2.

Estimated quantities of chemicals required for immediate work requirements are stored and transported according to manufacturer specifications and company and compliance requirements.

4.3.

PPE is stored separately to chemicals and vehicle occupants.

4.4.

Equipment, including PPE, is secured, used and maintained according to manufacturer specifications and company and compliance requirements.

4.5.

Access to and operation of the pest management vehicle are restricted to authorised personnel according to company and compliance requirements.

5.

Maintain a pest management vehicle.

5.1.

Vehicle is safety checked and regular servicing is arranged to ensure roadworthiness according to manufacturer specifications and company and compliance requirements.

5.2.

Vehicle is cleaned regularly to remove chemical contaminants according to manufacturer specifications and company and compliance requirements.

5.3.

Waste is collected and disposed of according to manufacturer specifications and company and compliance requirements.

5.4.

Vehicle is presented and maintained in line with company’s public image according to company requirements.

6.

Respond to emergency situations.

6.1.

Emergency response procedures are implemented when accidental spillages or emergency situations occur, according to manufacturer specifications and company and compliance requirements.

6.2.

Regulatory and company documentation is prepared according to company and compliance requirements.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Compliance requirements must include:

commonwealth, state and territory legislation and local government regulations relating to maintaining pest management vehicle storage areas, including:

pesticide registers and manifests

pesticide use

consumer protection

dangerous goods

privacy

public health and safety

environmental requirements relating to maintaining pest management vehicle storage area, including:

clean up, containment or isolation of hazards

company policies and guidelines

emergency chemical spill control measures

hazardous materials handling

licensing requirements for pest management

national and industry codes of practice and advisory standards relating to maintaining pest management vehicle storage areas

regulations, by-laws and guidelines of environmental protection agencies and government departments relating to maintaining pest management vehicle storage areas

work health and safety requirements relating to maintaining pest management vehicle storage areas, including:

injury, dangerous occurrence and incident reporting procedures

procedures for hazard identification, risk assessment and hazard control, including hierarchy of hazard control

requirements of national registration authority and state government authorities

use of safe work methods

work documentation and reporting procedures.

Hazards to be consideredmust include:

animal bites and stings

pesticides and other chemicals

electrical

environmental contamination

fire

lighting

manual handling

moving vehicles and machinery

noise

respiratory

slips and trips

temperature

ultraviolet (UV) radiation.

Equipment must include:

bunding and spill kit

inspection equipment

lockable storage areas

pesticide application equipment

pesticide measuring and mixing equipment

waste disposal containers.

Emergency response procedures must include one of more of the following:

calling emergency numbers, as required

cleaning up

containing hazards

decontaminating

evacuating work site or workplace

isolating hazards

notifying authorities

using PPE.

Safety warnings must include one or more of the following:

charts and posters

instructions

labels

signs and placards

symbols.

Safety information must include:

chemical co-location, separation and segregation requirements

chemical manifests

chemical registers

company policies and procedures

container and package storage arrangements

dangerous goods diamonds

emergency management plans

health and safety information

manufacturer instructions

manufacturer specifications

operation manuals

product labels

SDS

waste disposal information.

Personal protective equipment must include:

appropriate eye, ear and respiratory protection

first aid kits appropriate for a range of tasks and locations

site specific PPE and clothing requirements

soap and towel

sun protection.